[PATCH 1/4] dt-bindings: pinctrl: add bindings for MediaTek MT7622 SoC

Sean Wang sean.wang at mediatek.com
Wed Nov 29 01:14:30 PST 2017


On Tue, 2017-11-28 at 09:20 -0600, Rob Herring wrote:
> On Tue, Nov 28, 2017 at 11:49:59AM +0800, sean.wang at mediatek.com wrote:
> > From: Sean Wang <sean.wang at mediatek.com>
> > 
> > Add devicetree bindings for MediaTek MT7622 pinctrl driver.
> > 
> > Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> > ---
> >  .../devicetree/bindings/pinctrl/pinctrl-mt7622.txt | 330 +++++++++++++++++++++
> >  1 file changed, 330 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> > new file mode 100644
> > index 0000000..ce86d45
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> > @@ -0,0 +1,330 @@
> > +== MediaTek MT7622 pinctrl controller ==
> > +
> > +Required properties for the root node:
> > + - compatible: Should be one of the following
> > +	       "mediatek,mt7622-pinctrl" for MT7622 SoC
> > + - reg: offset and length of the pinctrl space
> > +
> > + - gpio-controller: Marks the device node as a GPIO controller.
> > + - #gpio-cells: Should be two. The first cell is the pin number and the
> > +   second is the GPIO flags.
> > +
> > +Please refer to pinctrl-bindings.txt in this directory for details of the
> > +common pinctrl bindings used by client devices, including the meaning of the
> > +phrase "pin configuration node".
> > +
> > +MT7622 pin configuration nodes act as a container for an arbitrary number of
> > +subnodes. Each of these subnodes represents some desired configuration for a
> > +pin, a group, or a list of pins or groups. This configuration can include the
> > +mux function to select on those pin(s)/group(s), and various pin configuration
> > +parameters, such as pull-up, slew rate, etc.
> > +
> > +We support 2 types of configuration nodes. Those nodes can be either pinmux
> > +nodes or pinconf nodes. Each configuration node can consist of multiple nodes
> > +describing the pinmux and pinconf options.
> > +
> > +The name of each subnode is no matter as long as it is unique; all subnodes
> 
> s/is no matter/doesn't matter/
> 

will be fixed

> > +should be enumerated and processed purely based on their content.
> > +
> > +== pinmux nodes content ==
> > +
> > +The following generic properties as defined in pinctrl-bindings.txt are valid
> > +to specify in a pinmux subnode:
> > +
> > +Required properties are:
> > + - groups: An array of strings. Each string contains the name of a group.
> > +  Valid values for these names are listed below.
> > + - function: A string containing the name of the function to mux to the
> > +  group. Valid values for function names are listed below.
> > +
> > +== pinconf nodes content ==
> > +
> > +The following generic properties as defined in pinctrl-bindings.txt are valid
> > +to specify in a pinconf subnode:
> > +
> > +Required properties are:
> > + - pins: An array of strings. Each string contains the name of a pin.
> > +  Valid values for these names are listed below.
> > + - groups: An array of strings. Each string contains the name of a group.
> > +  Valid values for these names are listed below.
> > +
> > +Optional properies are:
> > + bias-disable, bias-pull, bias-pull-down, input-enable,
> > + input-schmitt-enable, input-schmitt-disable, output-enable
> > + output-low, output-high, drive-strength, slew-rate
> > +
> > + Valid arguments for 'slew-rate' are '0' and '1' to select between slow and
> > + fast respectively.
> > + Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA.
> > +
> > +The following specific properties as defined are valid to specify in a pinconf
> > +subnode:
> > +
> > +Optional properties are:
> > + - mediatek,tdsel: Valid arguments are from 0 to 15
> > + - mediatek,rdsel: Valid arguments are from 0 to 63
> 
> What are these properties controlling?
> 

okay. these properties will be extended as below

Optional properties are:
 - mediatek,tdsel: An integer describing the steps for output level
shifter duty cycle when asserted (high pulse width adjustment). Valid
arguments are from 0 to 15.
 - mediatek,rdsel: An integer describing the steps for input level
shifter duty cycle when asserted (high pulse width adjustment). Valid
arguments are from 0 to 63.


> > +
> > +== Valid values for pins, function and groups on MT7622 ==
> > +
> > +Valid values for pins are:
> > +pins can be referenced via the pin names as the below table shown and the
> > +related physical number is also put ahead of those names which helps cross
> > +references to pins between groups to know whether pins assignment conflict
> > +happens among devices try to acquire those available pins.
> > +
> > +	Pin #:  Valid values for pins
> > +	-----------------------------
> > +	PIN 0: "GPIO_A"
> > +	PIN 1: "I2S1_IN"
> > +	PIN 2: "I2S1_OUT"
> > +	PIN 3: "I2S_BCLK"
> > +	PIN 4: "I2S_WS"
> > +	PIN 5: "I2S_MCLK"
> > +	PIN 6: "TXD0"
> > +	PIN 7: "RXD0"
> > +	PIN 8: "SPI_WP"
> > +	PIN 9: "SPI_HOLD"
> > +	PIN 10: "SPI_CLK"
> > +	PIN 11: "SPI_MOSI"
> > +	PIN 12: "SPI_MISO"
> > +	PIN 13: "SPI_CS"
> > +	PIN 14: "SPI_SDA"
> > +	PIN 15: "SPI_SCL"
> > +	PIN 16: "I2S2_IN"
> > +	PIN 17: "I2S3_IN"
> > +	PIN 18: "I2S4_IN"
> > +	PIN 19: "I2S2_OUT"
> > +	PIN 20: "I2S3_OUT"
> > +	PIN 21: "I2S4_OUT"
> > +	PIN 22: "GPIO_B"
> > +	PIN 23: "MDC"
> > +	PIN 24: "MDIO"
> > +	PIN 25: "G2_TXD0"
> > +	PIN 26: "G2_TXD1"
> > +	PIN 27: "G2_TXD2"
> > +	PIN 28: "G2_TXD3"
> > +	PIN 29: "G2_TXEN"
> > +	PIN 30: "G2_TXC"
> > +	PIN 31: "G2_RXD0"
> > +	PIN 32: "G2_RXD1"
> > +	PIN 33: "G2_RXD2"
> > +	PIN 34: "G2_RXD3"
> > +	PIN 35: "G2_RXDV"
> > +	PIN 36: "G2_RXC"
> > +	PIN 37: "NCEB"
> > +	PIN 38: "NWEB"
> > +	PIN 39: "NREB"
> > +	PIN 40: "NDL4"
> > +	PIN 41: "NDL5"
> > +	PIN 42: "NDL6"
> > +	PIN 43: "NDL7"
> > +	PIN 44: "NRB"
> > +	PIN 45: "NCLE"
> > +	PIN 46: "NALE"
> > +	PIN 47: "NDL0"
> > +	PIN 48: "NDL1"
> > +	PIN 49: "NDL2"
> > +	PIN 50: "NDL3"
> > +	PIN 51: "MDI_TP_P0"
> > +	PIN 52: "MDI_TN_P0"
> > +	PIN 53: "MDI_RP_P0"
> > +	PIN 54: "MDI_RN_P0"
> > +	PIN 55: "MDI_TP_P1"
> > +	PIN 56: "MDI_TN_P1"
> > +	PIN 57: "MDI_RP_P1"
> > +	PIN 58: "MDI_RN_P1"
> > +	PIN 59: "MDI_RP_P2"
> > +	PIN 60: "MDI_RN_P2"
> > +	PIN 61: "MDI_TP_P2"
> > +	PIN 62: "MDI_TN_P2"
> > +	PIN 63: "MDI_TP_P3"
> > +	PIN 64: "MDI_TN_P3"
> > +	PIN 65: "MDI_RP_P3"
> > +	PIN 66: "MDI_RN_P3"
> > +	PIN 67: "MDI_RP_P4"
> > +	PIN 68: "MDI_RN_P4"
> > +	PIN 69: "MDI_TP_P4"
> > +	PIN 70: "MDI_TN_P4"
> > +	PIN 71: "SPI2_CK"
> > +	PIN 72: "SPI2_DATA"
> > +	PIN 73: "SPIC1_CLK"
> > +	PIN 74: "SPIC1_MOSI"
> > +	PIN 75: "SPIC1_MISO"
> > +	PIN 76: "SPIC1_CS"
> > +	PIN 77: "GPIO_D"
> > +	PIN 78: "WATCHDOG"
> > +	PIN 79: "RTS3_N"
> > +	PIN 80: "CTS3_N"
> > +	PIN 81: "TXD3"
> > +	PIN 82: "RXD3"
> > +	PIN 83: "PERST0_N"
> > +	PIN 84: "PERST1_N"
> > +	PIN 85: "WLED_N"
> > +	PIN 86: "EPHY_LED0_N"
> > +	PIN 87: "AUXIN0"
> > +	PIN 88: "AUXIN1"
> > +	PIN 89: "AUXIN2"
> > +	PIN 90: "AUXIN3"
> > +	PIN 91: "TXD4"
> > +	PIN 92: "RXD4"
> > +	PIN 93: "RTS4_IN"
> > +	PIN 94: "CST4_IN"
> > +	PIN 95: "PWM1"
> > +	PIN 96: "PWM2"
> > +	PIN 97: "PWM3"
> > +	PIN 98: "PWM4"
> > +	PIN 99: "PWM5"
> > +	PIN 100: "PWM6"
> > +	PIN 101: "PWM7"
> > +	PIN 102: "GPIO_E"
> > +
> > +Valid values for function are:
> > +	"emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie",
> > +	"pwm", "sd", "spi", "tdm", "uart"
> > +
> > +Valid values for groups are:
> > +additional data is put followingly with valid value allowing us to know which
> > +applicable function and which relevant pins (in pin#) are able applied for that
> > +group.
> > +
> > +	Valid value			function	pins (in pin#)
> > +	-------------------------------------------------------------------------
> > +	"emmc"				"emmc"		40, 41, 42, 43, 44, 45,
> > +							47, 48, 49, 50
> > +	"esw"				"eth"		59, 60, 61, 62, 63, 64,
> > +							65, 66, 67, 68, 69, 70
> > +	"mdc_mdio"			"eth"		23, 24
> > +	"gmac1"				"eth"		59, 60, 61, 62, 63, 64,
> > +							65, 66, 67, 68, 69, 70
> > +	"gmac2"				"eth"		25, 26, 27, 28, 29, 30,
> > +							31, 32, 33, 34, 35, 36
> > +	"i2c0"				"i2c"		14, 15
> > +	"i2c1_0"			"i2c"		55, 56
> > +	"i2c1_1"			"i2c"		73, 74
> > +	"i2c1_2"			"i2c"		87, 88
> > +	"i2c2_0"			"i2c"		57, 58
> > +	"i2c2_1"			"i2c"		75, 76
> > +	"i2c2_2"			"i2c"		89, 90
> > +	"i2s_in_bclk_ws_mclk"		"i2s"		3, 4, 5
> > +	"i2s1_in_data"			"i2s"		1
> > +	"i2s2_in_data"			"i2s"		16
> > +	"i2s3_in_data"			"i2s"		17
> > +	"i2s4_in_data"			"i2s"		18
> > +	"i2s_out_bclk_ws_mclk"		"i2s"		3, 4, 5
> > +	"i2s1_out_data"			"i2s"		2
> > +	"i2s2_out_data"			"i2s"		19
> > +	"i2s3_out_data"			"i2s"		20
> > +	"i2s4_out_data"			"i2s"		21
> > +	"ir_0_tx"			"ir"		16
> > +	"ir_1_tx"			"ir"		59
> > +	"ir_2_tx"			"ir"		99
> > +	"ir_0_rx"			"ir"		17
> > +	"ir_1_rx"			"ir"		60
> > +	"ir_2_rx"			"ir"		100
> > +	"ephy0_led"			"led"		86
> > +	"ephy1_led"			"led"		91
> > +	"ephy2_led"			"led"		92
> > +	"ephy3_led"			"led"		93
> > +	"ephy4_led"			"led"		94
> > +	"wled"				"led"		85
> > +	"par_nand"			"flash"		37, 38, 39, 40, 41, 42,
> > +							43, 44, 45, 46, 47, 48,
> > +							49, 50
> > +	"snfi"				"flash"		8, 9, 10, 11, 12, 13
> > +	"spi_nor"			"flash"		8, 9, 10, 11, 12, 13
> > +	"pcie0_0_waken_clkreq"		"pcie"		14, 15
> > +	"pcie0_1_waken_clkreq"		"pcie"		79, 80
> > +	"pcie1_0_waken_clkreq"		"pcie"		14, 15
> > +	"pcie0_pad_perst"		"pcie"		83
> > +	"pcie1_pad_perst"		"pcie"		84
> > +	"pwm_ch1_0"			"pwm"		51
> > +	"pwm_ch1_1"			"pwm"		73
> > +	"pwm_ch1_2"			"pwm"		95
> > +	"pwm_ch2_0"			"pwm"		52
> > +	"pwm_ch2_1"			"pwm"		74
> > +	"pwm_ch2_2"			"pwm"		96
> > +	"pwm_ch3_0"			"pwm"		53
> > +	"pwm_ch3_1"			"pwm"		75
> > +	"pwm_ch3_2"			"pwm"		97
> > +	"pwm_ch4_0"			"pwm"		54
> > +	"pwm_ch4_1"			"pwm"		67
> > +	"pwm_ch4_2"			"pwm"		76
> > +	"pwm_ch4_3"			"pwm"		98
> > +	"pwm_ch5_0"			"pwm"		68
> > +	"pwm_ch5_1"			"pwm"		77
> > +	"pwm_ch5_2"			"pwm"		99
> > +	"pwm_ch6_0"			"pwm"		69
> > +	"pwm_ch6_1"			"pwm"		78
> > +	"pwm_ch6_2"			"pwm"		81
> > +	"pwm_ch6_3"			"pwm"		100
> > +	"pwm_ch7_0"			"pwm"		70
> > +	"pwm_ch7_1"			"pwm"		82
> > +	"pwm_ch7_2" 			"pwm"		101
> 
> Mixed space and tabs.
> 

will be fixed

> > +	"sd_0"				"sd"		16, 17, 18, 19, 20, 21
> > +	"sd_1"				"sd"		25, 26, 27, 28, 29, 30
> > +	"spic0_0"			"spi"		63, 64, 65, 66
> > +	"spic0_1"			"spi"		79, 80, 81, 82
> > +	"spic1_0"			"spi"		67, 68, 69, 70
> > +	"spic1_1"			"spi"		73, 74, 75, 76
> > +	"tdm_0_out_mclk_bclk"		"tdm"		8, 9, 10
> > +	"tdm_0_in_mclk_bclk_ws"		"tdm"		11, 12, 13
> > +	"tdm_0_out_data"		"tdm"		20
> > +	"tdm_0_in_data"			"tdm"		21
> > +	"tdm_1_out_mclk_bclk"		"tdm"		57, 58, 59
> > +	"tdm_1_in_mclk_bclk_ws"		"tdm"		60, 61, 62
> > +	"tdm_1_out_data"		"tdm"		55
> > +	"tdm_1_in_data"			"tdm"		56
> > +	"uart0_0_tx_rx"			"uart"		6, 7
> > +	"uart1_0_tx_rx"			"uart"		55, 56
> > +	"uart1_0_rts_cts"		"uart"		57, 58
> > +	"uart1_1_tx_rx"			"uart"		73, 74
> > +	"uart1_1_rts_cts"		"uart"		75, 76
> > +	"uart2_0_tx_rx"			"uart"		3, 4
> > +	"uart2_0_rts_cts"		"uart"		1, 2
> > +	"uart2_1_tx_rx"			"uart"		51, 52
> > +	"uart2_1_rts_cts"		"uart"		53, 54
> > +	"uart2_2_tx_rx"			"uart"		59, 60
> > +	"uart2_2_rts_cts"		"uart"		61, 62
> > +	"uart2_3_tx_rx"			"uart"		95, 96
> > +	"uart3_0_tx_rx"			"uart"		57, 58
> > +	"uart3_1_tx_rx"			"uart"		81, 82
> > +	"uart3_1_rts_cts"		"uart"		79, 80
> > +	"uart4_0_tx_rx"			"uart"		61, 62
> > +	"uart4_1_tx_rx"			"uart"		91, 92
> > +	"uart4_1_rts_cts"		"uart"		93, 94
> > +	"uart4_2_tx_rx"			"uart"		97, 98
> > +	"uart4_2_rts_cts"		"uart"		95, 96
> > +
> > +Example:
> > +
> > +	pio: pinctrl at 10211000 {
> > +		compatible = "mediatek,mt7622-pinctrl";
> > +		reg = <0 0x10211000 0 0x1000>;
> > +		gpio-controller;
> > +		#gpio-cells = <2>;
> > +
> > +		pinctrl_eth_default: eth-default {
> > +			mux_mdio {
> 
> s/_/-/
> 

will be fixed

> > +				groups = "mdc_mdio";
> > +				function = "eth";
> > +				drive-strength = <12>;
> > +			};
> > +
> > +			mux_gmac2 {
> 
> ditto
> 

will be fixed 

> > +				groups = "gmac2";
> > +				function = "eth";
> > +				drive-strength = <12>;
> > +			};
> > +
> > +			mux_esw {


will be fixed

> > +				groups = "esw";
> > +				function = "eth";
> > +				drive-strength = <8>;
> > +			};
> > +


> > +			conf_mdio {


will be fixed

> > +				pins = "MDC";
> > +				bias-pull-up;
> > +			};
> > +		};
> > +	};
> > -- 
> > 2.7.4
> > 
> 





More information about the Linux-mediatek mailing list