[PATCH net-next v3 2/5] net-next: dsa: add Mediatek tag RX/TX handler

sean.wang at mediatek.com sean.wang at mediatek.com
Wed Mar 29 02:38:20 PDT 2017


From: Sean Wang <sean.wang at mediatek.com>

Add the support for the 4-bytes tag for DSA port distinguishing inserted
allowing receiving and transmitting the packet via the particular port.
The tag is being added after the source MAC address in the ethernet
header.

Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Signed-off-by: Landen Chao <Landen.Chao at mediatek.com>
Reviewed-by: Andrew Lunn <andrew at lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
---
 include/net/dsa.h  |   1 +
 net/dsa/Kconfig    |   2 +
 net/dsa/Makefile   |   1 +
 net/dsa/dsa.c      |   3 ++
 net/dsa/dsa_priv.h |   3 ++
 net/dsa/tag_mtk.c  | 117 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 127 insertions(+)
 create mode 100644 net/dsa/tag_mtk.c

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 4e13e69..3276547 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -31,6 +31,7 @@ enum dsa_tag_protocol {
 	DSA_TAG_PROTO_EDSA,
 	DSA_TAG_PROTO_BRCM,
 	DSA_TAG_PROTO_QCA,
+	DSA_TAG_PROTO_MTK,
 	DSA_TAG_LAST,		/* MUST BE LAST */
 };
 
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 9649238..d78789b 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -31,4 +31,6 @@ config NET_DSA_TAG_TRAILER
 config NET_DSA_TAG_QCA
 	bool
 
+config NET_DSA_TAG_MTK
+	bool
 endif
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 31d3437..9b1d478 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -8,3 +8,4 @@ dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
 dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
 dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
 dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
+dsa_core-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index b6d4f6a..617f736 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -53,6 +53,9 @@ static struct sk_buff *dsa_slave_notag_xmit(struct sk_buff *skb,
 #ifdef CONFIG_NET_DSA_TAG_QCA
 	[DSA_TAG_PROTO_QCA] = &qca_netdev_ops,
 #endif
+#ifdef CONFIG_NET_DSA_TAG_MTK
+	[DSA_TAG_PROTO_MTK] = &mtk_netdev_ops,
+#endif
 	[DSA_TAG_PROTO_NONE] = &none_ops,
 };
 
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 0706a51..2a31399 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -85,4 +85,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
 /* tag_qca.c */
 extern const struct dsa_device_ops qca_netdev_ops;
 
+/* tag_mtk.c */
+extern const struct dsa_device_ops mtk_netdev_ops;
+
 #endif
diff --git a/net/dsa/tag_mtk.c b/net/dsa/tag_mtk.c
new file mode 100644
index 0000000..833a9d6
--- /dev/null
+++ b/net/dsa/tag_mtk.c
@@ -0,0 +1,117 @@
+/*
+ * Mediatek DSA Tag support
+ * Copyright (C) 2017 Landen Chao <landen.chao at mediatek.com>
+ *		      Sean Wang <sean.wang at mediatek.com>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/etherdevice.h>
+#include "dsa_priv.h"
+
+#define MTK_HDR_LEN		4
+#define MTK_HDR_RECV_SOURCE_PORT_MASK	GENMASK(2, 0)
+#define MTK_HDR_XMIT_DP_BIT_MASK	GENMASK(5, 0)
+
+static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb,
+				    struct net_device *dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	u8 *mtk_tag;
+
+	if (skb_cow_head(skb, MTK_HDR_LEN) < 0)
+		goto out_free;
+
+	skb_push(skb, MTK_HDR_LEN);
+
+	memmove(skb->data, skb->data + MTK_HDR_LEN, 2 * ETH_ALEN);
+
+	/* Build the tag after the MAC Source Address */
+	mtk_tag = skb->data + 2 * ETH_ALEN;
+	mtk_tag[0] = 0;
+	mtk_tag[1] = (1 << p->dp->index) & MTK_HDR_XMIT_DP_BIT_MASK;
+	mtk_tag[2] = 0;
+	mtk_tag[3] = 0;
+
+	return skb;
+
+out_free:
+	kfree_skb(skb);
+	return NULL;
+}
+
+static int mtk_tag_rcv(struct sk_buff *skb, struct net_device *dev,
+		       struct packet_type *pt, struct net_device *orig_dev)
+{
+	struct dsa_switch_tree *dst = dev->dsa_ptr;
+	struct dsa_switch *ds;
+	int port;
+	__be16 *phdr, hdr;
+
+	if (unlikely(!dst))
+		goto out_drop;
+
+	skb = skb_unshare(skb, GFP_ATOMIC);
+	if (!skb)
+		goto out;
+
+	if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
+		goto out_drop;
+
+	/* The MTK header is added by the switch between src addr
+	 * and ethertype at this point, skb->data points to 2 bytes
+	 * after src addr so header should be 2 bytes right before.
+	 */
+	phdr = (__be16 *)(skb->data - 2);
+	hdr = ntohs(*phdr);
+
+	/* Remove MTK tag and recalculate checksum. */
+	skb_pull_rcsum(skb, MTK_HDR_LEN);
+
+	memmove(skb->data - ETH_HLEN,
+		skb->data - ETH_HLEN - MTK_HDR_LEN,
+		2 * ETH_ALEN);
+
+	/* This protocol doesn't support cascading multiple
+	 * switches so it's safe to assume the switch is first
+	 * in the tree.
+	 */
+	ds = dst->ds[0];
+	if (!ds)
+		goto out_drop;
+
+	/* Get source port information */
+	port = (hdr & MTK_HDR_RECV_SOURCE_PORT_MASK);
+	if (!ds->ports[port].netdev)
+		goto out_drop;
+
+	/* Update skb & forward the frame accordingly */
+	skb_push(skb, ETH_HLEN);
+
+	skb->pkt_type = PACKET_HOST;
+	skb->dev = ds->ports[port].netdev;
+	skb->protocol = eth_type_trans(skb, skb->dev);
+
+	skb->dev->stats.rx_packets++;
+	skb->dev->stats.rx_bytes += skb->len;
+
+	netif_receive_skb(skb);
+
+	return 0;
+
+out_drop:
+	kfree_skb(skb);
+out:
+	return 0;
+}
+
+const struct dsa_device_ops mtk_netdev_ops = {
+	.xmit	= mtk_tag_xmit,
+	.rcv	= mtk_tag_rcv,
+};
-- 
1.9.1




More information about the Linux-mediatek mailing list