[PATCH] mmc: core: Do not hold re-tuning during CMD6 commands

[Ulf Hansson]

[...]

>> The retry mechanism provided by mmc_wait_for_cmd() and friends really only
>> makes sense for simple commands.  In other cases, like this, we need to
>> consider what state the card is in.  For __mmc_switch we need to consider
>> whether the card is busy or whether a timing change been made.
>
> I definitely agree. We should remove retries for CMD6 and perhaps also
> for some other cases.
>
> When we have changed the above in __mmc_switch(), the change Chaotian
> suggest gets a different impact, as it would potentially allow a
> re-tuning to happen before the next CMD1to poll for busy or to check

/s/CMD1/CMD13

> the switch status. This isn't okay.
>
> This all sounds to me that Chaotian's issue may not all be related to
> tuning, but to the CMD6 switch sequence itself. However I may be wrong
> - of course. :-)
>
> [...]
>
> Kind regards
> Uffe