[PATCH v5 0/2] Add Basic SoC support for MT7622

[Matthias Brugger]

On 07/20/2017 05:02 AM, Sean Wang wrote:
> Hi, Matthias
> 
> just a gentle ping on this
> 

pushed now to v4.13-next/dts64

Thanks!

> 	Sean
> 
> 
> On Sat, 2017-06-17 at 01:06 +0800, sean.wang at mediatek.com wrote:
>> From: Sean Wang <sean.wang at mediatek.com>
>>
>> Changes since v4:
>> - redefine the two dummy clocks with the correct frequency
>>    which is 25MHz and 280MHz respectively.
>>
>> Changes since v3:
>> - get rid of those accepted patches
>> - rebased to branch v4.12-next/dts64 in Matthias' tree
>> - fixed uart node in dts with two clocks as described in bindings documentation
>>
>> Changes since v2:
>> - merge back required basic clock nodes into the .dtsi file
>> - update the property of interrupts in timer nodes with 2 CPUs
>>
>> Changes since v1:
>> - update SPDX-License-Identifier
>> - remove next-level-cache property since cache geometry detection was removed since 4.12
>>
>> This patch set adds basic SoC support for MediaTek MT7622
>> SoC based on 4.12-rc1.
>>
>> Sean Wang (2):
>>    arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file
>>    arm64: dts: mt7622: add dts file for MT7622 reference board variant 1
>>
>>   arch/arm64/boot/dts/mediatek/Makefile        |   1 +
>>   arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts |  27 +++++++
>>   arch/arm64/boot/dts/mediatek/mt7622.dtsi     | 110 +++++++++++++++++++++++++++
>>   3 files changed, 138 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt7622.dtsi
>>
> 
>