[PATCH net-next 3/4] net-next: mediatek: add support for MediaTek MT7622 SoC

[Andrew Lunn]

Hi Sean

>  static void mtk_phy_link_adjust(struct net_device *dev)
>  {
>  	struct mtk_mac *mac = netdev_priv(dev);
> @@ -269,6 +311,7 @@ static int mtk_phy_connect(struct net_device *dev)
>  	if (!np)
>  		return -ENODEV;
>  
> +	mac->ge_mode = 0;
>  	switch (of_get_phy_mode(np)) {
>  	case PHY_INTERFACE_MODE_TRGMII:
>  		mac->trgmii = true;
> @@ -276,7 +319,15 @@ static int mtk_phy_connect(struct net_device *dev)
>  	case PHY_INTERFACE_MODE_RGMII_RXID:
>  	case PHY_INTERFACE_MODE_RGMII_ID:
>  	case PHY_INTERFACE_MODE_RGMII:
> -		mac->ge_mode = 0;
> +		break;
> +	case PHY_INTERFACE_MODE_SGMII:
> +		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII))
> +			mtk_gmac_sgmii_hw_setup(eth, mac->id);
> +		break;

> +	case PHY_INTERFACE_MODE_INTERNAL:
> +		if (MTK_HAS_CAPS(eth->soc->caps, MTK_GMAC1_ESW) && !mac->id)
> +			/* Setup the path through ESW internal switch */
> +			mtk_w32(eth, MTK_MUX_TO_ESW, MTK_MAC_MISC);

This bit is interesting. Generally, there is no PHY at all between the
MAC and the switch. So i don't think this is correct. Please can you
take this out for the moment, until you actually add support for the
switch. We can discuss it then, when we see the bigger picture.

	Andrew