[PATCH] mmc: mediatek: add ops->get_cd() support
Chaotian Jing
chaotian.jing at mediatek.com
Sun Jul 2 23:24:56 PDT 2017
if user plug out sd card slowly, finally card is plugged out but
cat /proc/partitions can find that card is still exist in kernel.
that's because alougth get card detect interrupt but CMD13 still
can get correct response(all other pins are connected expect card
detect pin).
add ops->get_cd() can avoid this issue.
Signed-off-by: Chaotian Jing <chaotian.jing at mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 5c1e178..975c765 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1585,6 +1585,7 @@ static void msdc_hw_reset(struct mmc_host *mmc)
.request = msdc_ops_request,
.set_ios = msdc_ops_set_ios,
.get_ro = mmc_gpio_get_ro,
+ .get_cd = mmc_gpio_get_cd,
.start_signal_voltage_switch = msdc_ops_switch_volt,
.card_busy = msdc_card_busy,
.execute_tuning = msdc_execute_tuning,
--
1.8.1.1.dirty
More information about the Linux-mediatek
mailing list