[PATCH] spi: mediatek: Manually set dma_ops for spi_master device

Robin Murphy robin.murphy at arm.com
Wed Jan 25 09:59:43 PST 2017


On 25/01/17 10:24, Daniel Kurtz wrote:
> Hi Robin,
> 
> On Tue, Jan 24, 2017 at 11:14 PM, Robin Murphy <robin.murphy at arm.com> wrote:
>> Hi Dan,
> 
> [snip...]
> 
>>> And I really don't know why we needed to set the coherent_dma_mask to 0 to
>>> avoid SPI transaction errors.
>>
>> Following what I mentioned above, "git grep dma_alloc drivers/spi" makes
>> it seem like coherent DMA isn't used anywhere relevant, which is rather
>> puzzling. Unless of course somewhere along the line somebody's done the
>> dev->dma_mask = &dev->dma_coherent_mask hack, with the result that
>> writing one mask hits both, making *all* DMA fail and big transfers fall
>> back to PIO.
> 
> You mean this last line?
> 
>>> @@ -575,6 +576,10 @@ static int mtk_spi_probe(struct platform_device *pdev)
>>>               goto err_put_master;
>>>       }
>>>
>>> +     /* Call of_dma_configure to set up spi_master's dma_ops */
>>> +     of_dma_configure(&master->dev, master->dev.of_node);
>>> +     /* But explicitly set the coherent_dma_mask to 0 */
>>> +     master->dev.coherent_dma_mask = 0;
>>>       if (!pdev->dev.dma_mask)
>>>               pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
>                                   ^^^^^

Ha, I totally failed to spot that!

> As predicted, setting the dma_mask = 0 causes "all DMA to fail".  In
> particular, dma_capable() always returns false, so
> swiotlb_map_sg_attrs() takes the map_single() path, instead of just
> assigning:
> 
>    sg->dma_address = dev_addr;
> 
> swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
>                      enum dma_data_direction dir, unsigned long attrs)
> {
>         struct scatterlist *sg;
>         int i;
> 
>         BUG_ON(dir == DMA_NONE);
> 
>         for_each_sg(sgl, sg, nelems, i) {
>                 phys_addr_t paddr = sg_phys(sg);
>                 dma_addr_t dev_addr = phys_to_dma(hwdev, paddr);
> 
>                 if (swiotlb_force == SWIOTLB_FORCE ||
>                     !dma_capable(hwdev, dev_addr, sg->length)) {
>                         phys_addr_t map = map_single(hwdev, sg_phys(sg),
>                                                      sg->length, dir, attrs);
>                         ...
>                         }
>                         sg->dma_address = phys_to_dma(hwdev, map);
>                 } else
>                         sg->dma_address = dev_addr;
>                 sg_dma_len(sg) = sg->length;
>         }
>         return nelems;
> }
> 
> So, I think this means that the only reason the MTK SPI driver ever
> worked before was that it was tested on an older kernel, so the
> spi_master was defaulting to swiotlb_dma_ops with a 0 dma_mask, and
> therefore it was using SWIOTLB bounce buffers (via 'map_single'), and
> not actually ever doing real DMA.

Well, it's still "real DMA" if the device is able to slurp data out of
the bounce buffer. That suggests there might be some mismatch between
the default DMA mask it's getting given and the actual hardware
capability (i.e. the bounce buffer happens to fall somewhere accessible,
but other addresses may not be) - is crazy 33-bit mode involved here?

Robin.

> I'm in a bit over my head here, any suggestions on how to fix this?
> 
> -Dan
> 




More information about the Linux-mediatek mailing list