[PATCH v5] arm64: dts: mt8173: add mmsel clocks for 4K support
Daniel Kurtz
djkurtz at chromium.org
Wed Jan 11 20:50:44 PST 2017
Hi Matthias,
(Trying again to send plain text email)...
On Thu, Aug 4, 2016 at 10:57 AM, Bibby Hsieh <bibby.hsieh at mediatek.com> wrote:
> To support HDMI 4K resolution, mmsys need clcok
> mm_sel to be 400MHz.
>
> The board .dts file should override the clock rate
> property with the higher VENCPLL frequency the board
> supports HDMI 4K resolution.
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>
It looks like this patch was lost. It is actually a prerequisite for
MTK 4k HDMI support, which already landed in v4.9.
See the email thread entitled:
[PATCH v5 0/3] MT8173 HDMI 4K support <https://lkml.org/lkml/2016/9/28/893>
Or these three:
0d2200794f0a drm/mediatek: modify the factor to make the pll_rate set
in the 1G-2G range
968253bd7caa drm/mediatek: enhance the HDMI driving current
d542b7c473f0 drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
-Dan
> ---
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 78529e4..c3f32f3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -690,6 +690,8 @@
> compatible = "mediatek,mt8173-mmsys", "syscon";
> reg = <0 0x14000000 0 0x1000>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
> + assigned-clock-rates = <400000000>;
> #clock-cells = <1>;
> };
>
> --
> 1.7.9.5
>
More information about the Linux-mediatek
mailing list