[PATCH v2 01/10] Document: DT: mediatek: multiple base address support for sysirq

[Mars Cheng]

Hi Rob,

On Wed, 2017-02-08 at 17:20 -0600, Rob Herring wrote:
> On Mon, Feb 06, 2017 at 08:15:27PM +0800, Mars Cheng wrote:
> > This describes how to specify multiple base addresses for sysirq
> > in mediatek platforms.
> > 
> > Signed-off-by: Mars Cheng <mars.cheng at mediatek.com>
> > ---
> >  .../interrupt-controller/mediatek,sysirq.txt       |   13 +++++++++----
> >  1 file changed, 9 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
> > index 9d1d72c..1718454 100644
> > --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
> > @@ -18,16 +18,21 @@ Required properties:
> >  	"mediatek,mt2701-sysirq"
> >  - interrupt-controller : Identifies the node as an interrupt controller
> >  - #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
> > +- #intpol-bases: Indicate how many base addresses to be used, default is 1.
> 
> There is no point in this. It can either be implied by the compatible 
> string or you just try to get the resource for the 2nd region. (Or in DT 
> terms, get the size of reg.)
> 

Originally I try to mimic #redistributor-regions in
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt.

But I think you are right since irq-gic-v3 has several kinds of bases in
reg so that they need an indicator to decode. For irq-mtk-sysirq, we can
just try 2nd region and increment a counter to get the number of bases.

Will fix this in v3.

Thanks.

> >  - interrupt-parent: phandle of irq parent for sysirq. The parent must
> >    use the same interrupt-cells format as GIC.
> >  - reg: Physical base address of the intpol registers and length of memory
> > -  mapped region.
> > +  mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
> > +  need 1. If not set, the default is 1.
> >  
> >  Example:
> > -	sysirq: interrupt-controller at 10200100 {
> > -		compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq";
> > +	sysirq: intpol-controller at 10200620 {
> > +		compatible = "mediatek,mt6797-sysirq",
> > +			     "mediatek,mt6577-sysirq";
> >  		interrupt-controller;
> >  		#interrupt-cells = <3>;
> > +		#intpol-bases = <2>;
> >  		interrupt-parent = <&gic>;
> > -		reg = <0 0x10200100 0 0x1c>;
> > +		reg = <0 0x10220620 0 0x20>,
> > +		      <0 0x10220690 0 0x10>;
> >  	};
> > -- 
> > 1.7.9.5
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html