[PATCH net-next 1/3] net: dsa: mediatek: add VLAN support for MT7530

[Sean Wang]

Hi, Andrew

All sounds reasonable. All will be fixed in the next version.

	Sean

On Thu, 2017-12-07 at 16:24 +0100, Andrew Lunn wrote:
> >  static void
> > +mt7530_port_set_vlan_unware(struct dsa_switch *ds, int port)
> > +{
> > +	struct mt7530_priv *priv = ds->priv;
> > +	int i;
> > +	bool all_user_ports_removed = true;
> 
> Hi Sean
> 
> Reverse Christmas tree please.
> 

will be fixed 

> > +static int
> > +mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
> > +{
> > +	u32 val;
> > +	int ret;
> > +	struct mt7530_dummy_poll p;
> 
> Here too.
> 

will be fixed

> > +static int
> > +mt7530_port_vlan_prepare(struct dsa_switch *ds, int port,
> > +			 const struct switchdev_obj_port_vlan *vlan,
> > +			 struct switchdev_trans *trans)
> > +{
> > +	struct mt7530_priv *priv = ds->priv;
> > +
> > +	/* The port is being kept as VLAN-unware port when bridge is set up
> > +	 * with vlan_filtering not being set, Otherwise, the port and the
> > +	 * corresponding CPU port is required the setup for becoming a
> > +	 * VLAN-ware port.
> > +	 */
> > +	if (!priv->ports[port].vlan_filtering)
> > +		return 0;
> > +
> > +	mt7530_port_set_vlan_ware(ds, port);
> > +	mt7530_port_set_vlan_ware(ds, MT7530_CPU_PORT);
> 
> A prepare function should just validate that it is possible to carry
> out the operation. It should not change any state. These two last
> lines probably don't belong here.
> 

okay, it will be moved into the proper place such as
mt7530_port_vlan_filtering

> > +
> > +	return 0;
> > +}
> > +
> > +static void
> > +mt7530_hw_vlan_add(struct mt7530_priv *priv,
> > +		   struct mt7530_hw_vlan_entry *entry)
> > +{
> > +	u32 val;
> > +	u8 new_members;
> 
> Reverse Christmas tree. Please check the whole patch.
> 
 will be fixed

> > +static inline void INIT_MT7530_HW_ENTRY(struct mt7530_hw_vlan_entry *e,
> > +					int port, bool untagged)
> > +{
> > +	e->port = port;
> > +	e->untagged = untagged;
> > +}
> 
> All CAPITAL letters is for #defines. This is just a normal
> function. Please use lower case.
> 

will be fixed
> 	  Andrew
>