[bug report] PCI: mediatek: Add controller support for MT2712 and MT7622

[Ryder Lee]

Hi,

This warning is fixed by Honghui's patch and folded into
pci/host-mediatek git tree.

75983c6d1f
http://lkml.kernel.org/r/1502715868-17651-2-git-send-email-honghui.zhang@mediatek.com

On Fri, 2017-08-25 at 15:27 +0300, Dan Carpenter wrote:
> Hello Ryder Lee,
> 
> The patch 6a48aa410571: "PCI: mediatek: Add controller support for
> MT2712 and MT7622" from Aug 10, 2017, leads to the following static
> checker warning:
> 
> 	drivers/pci/host/pcie-mediatek.c:453 mtk_pcie_init_irq_domain()
> 	warn: passing zero to 'PTR_ERR'
> 
> 	drivers/pci/host/pcie-mediatek.c:460 mtk_pcie_init_irq_domain()
> 	warn: passing zero to 'PTR_ERR'
> 
> drivers/pci/host/pcie-mediatek.c
>    443  static int mtk_pcie_init_irq_domain(struct mtk_pcie_port *port,
>    444                                      struct device_node *node)
>    445  {
>    446          struct device *dev = port->pcie->dev;
>    447          struct device_node *pcie_intc_node;
>    448  
>    449          /* Setup INTx */
>    450          pcie_intc_node = of_get_next_child(node, NULL);
>    451          if (!pcie_intc_node) {
>    452                  dev_err(dev, "no PCIe Intc node found\n");
>    453                  return PTR_ERR(pcie_intc_node);
>                                ^^^^^^^^^^^^^^^^^^^^^^^
> This is a complicated way of returning 0, but I'm not sure what we
> should actually be returning here.
> 
>    454          }
>    455  
>    456          port->irq_domain = irq_domain_add_linear(pcie_intc_node, INTX_NUM,
>    457                                                   &intx_domain_ops, port);
>    458          if (!port->irq_domain) {
>    459                  dev_err(dev, "failed to get INTx IRQ domain\n");
>    460                  return PTR_ERR(port->irq_domain);
>                                ^^^^^^^^^^^^^^^^^^^^^^^^
> Also zero.
> 
>    461          }
>    462  
>    463          return 0;
>    464  }
> 
> regards,
> dan carpenter