[PATCH v2 2/2] dt-bindings: ata: add DT bindings for MediaTek SATA controller

Ryder Lee ryder.lee at mediatek.com
Thu Aug 10 20:57:36 PDT 2017


Hi Rob,

Sorry for the noise letter.

On Fri, 2017-08-11 at 10:25 +0800, Ryder Lee wrote:
> > > +Required properties:
> > > + - compatible	   : Must be "mediatek,ahci".
> > 
> > SoC specific compatible strings please.
> 
> Okay.

I took a look at ./ahci-platform.txt. Could we just add a generic
compatible string as below:

compatible: Must be "mediatek,soc-model-ahci", "mediatek,mtk-ahci"

In doing so, we can avoid having an endless list of compatibles for
those MTK SoCs with the same IP block.

> > > +
> > > +Optional properties:
> > > + - power-domains   : A phandle and power domain specifier pair to the power
> > > +		     domain which is responsible for collapsing and restoring
> > > +		     power to the peripheral.
> > > + - resets	   : Must contain an entry for each entry in reset-names.
> > > +		     See ../reset/reset.txt for details.
> > > + - reset-names	   : Associated names must be: "axi", "sw", "reg".
> > > + - mediatek,phy-mode : A phandle to the system controller, used to enable
> > > +		       SATA function.
> > > +
> > > +Example:
> > > +
> > > +	sata: sata at 1a200000 {
> > > +		compatible = "mediatek,ahci";

MT7622 should be:
               compatible = "mediatek,mt7622-ahci",
                            "mediatek,mtk-ahci";


Ryder





More information about the Linux-mediatek mailing list