[PATCH 2/3] irqchip: mtk-cirq: Add mediatek mtk-cirq implement
Marc Zyngier
marc.zyngier at arm.com
Thu Oct 13 01:28:08 PDT 2016
On Thu, 13 Oct 2016 13:06:33 +0800
Youlin Pei <youlin.pei at mediatek.com> wrote:
> This commit add the mtk-cirq implement for mt2701.
Can you please expand this a bit?
>
> Signed-off-by: Youlin Pei <youlin.pei at mediatek.com>
> ---
> drivers/irqchip/Makefile | 2 +-
> drivers/irqchip/irq-mtk-cirq.c | 257 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 258 insertions(+), 1 deletion(-)
> create mode 100644 drivers/irqchip/irq-mtk-cirq.c
>
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 4c203b6..eee95c6 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -59,7 +59,7 @@ obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
> obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
> obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
> obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o
> -obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o
> +obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o irq-mtk-cirq.o
> obj-$(CONFIG_ARCH_DIGICOLOR) += irq-digicolor.o
> obj-$(CONFIG_RENESAS_H8300H_INTC) += irq-renesas-h8300h.o
> obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
> diff --git a/drivers/irqchip/irq-mtk-cirq.c b/drivers/irqchip/irq-mtk-cirq.c
> new file mode 100644
> index 0000000..544767d
> --- /dev/null
> +++ b/drivers/irqchip/irq-mtk-cirq.c
> @@ -0,0 +1,257 @@
> +/*
> + * Copyright (c) 2016 MediaTek Inc.
> + * Author: Youlin.Pei <youlin.pei at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqdomain.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/syscore_ops.h>
> +
> +#define CIRQ_MASK_SET 0xC0
> +#define CIRQ_MASK_CLR 0x100
> +#define CIRQ_SENS_SET 0x180
> +#define CIRQ_SENS_CLR 0x1C0
> +#define CIRQ_POL_SET 0x240
> +#define CIRQ_POL_CLR 0x280
> +#define CIRQ_CONTROL 0x300
> +
> +#define CIRQ_EN 0x1
> +#define CIRQ_EDGE 0x2
> +#define CIRQ_FLUSH 0x4
> +
> +#define CIRQ_IRQ_NUM 0x200
> +
> +struct mtk_cirq_chip_data {
> + void __iomem *base;
> + unsigned int ext_irq_start;
> +};
> +
> +struct mtk_cirq_chip_data *cirq_data;
Any reason why this is not static?
> +
> +static void mtk_cirq_write_mask(struct irq_data *data, unsigned int offset)
> +{
> + struct mtk_cirq_chip_data *chip_data = data->chip_data;
> + unsigned int cirq_num = data->hwirq - chip_data->ext_irq_start;
I wonder why you have to compute this offset. Ideally, data->hwirq
should be the bit position (starting at zero). The fact that you have
an offset between the pin number in this driver and the IRQ number in
the GIC or sysirq should be resolved at alloc time.
> + u32 mask = 1 << (cirq_num % 32);
> +
> + writel(mask, chip_data->base + offset + (cirq_num / 32) * 4);
> +}
> +
> +static void mtk_cirq_mask(struct irq_data *data)
> +{
> + mtk_cirq_write_mask(data, CIRQ_MASK_SET);
> + irq_chip_mask_parent(data);
> +}
> +
> +static void mtk_cirq_unmask(struct irq_data *data)
> +{
> + mtk_cirq_write_mask(data, CIRQ_MASK_CLR);
> + irq_chip_unmask_parent(data);
> +}
> +
> +static int mtk_cirq_set_type(struct irq_data *data, unsigned int type)
> +{
> + int ret;
> +
> + switch (type & IRQ_TYPE_SENSE_MASK) {
> + case IRQ_TYPE_EDGE_FALLING:
> + mtk_cirq_write_mask(data, CIRQ_POL_CLR);
> + mtk_cirq_write_mask(data, CIRQ_SENS_CLR);
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + mtk_cirq_write_mask(data, CIRQ_POL_SET);
> + mtk_cirq_write_mask(data, CIRQ_SENS_CLR);
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + mtk_cirq_write_mask(data, CIRQ_POL_CLR);
> + mtk_cirq_write_mask(data, CIRQ_SENS_SET);
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + mtk_cirq_write_mask(data, CIRQ_POL_SET);
> + mtk_cirq_write_mask(data, CIRQ_SENS_SET);
> + break;
> + default:
> + break;
> + }
> +
> + data = data->parent_data;
> + ret = data->chip->irq_set_type(data, type);
> + return ret;
> +}
> +
> +static struct irq_chip mtk_cirq_chip = {
> + .name = "MT_CIRQ",
> + .irq_mask = mtk_cirq_mask,
> + .irq_unmask = mtk_cirq_unmask,
> + .irq_eoi = irq_chip_eoi_parent,
> + .irq_set_type = mtk_cirq_set_type,
> + .irq_retrigger = irq_chip_retrigger_hierarchy,
> +#ifdef CONFIG_SMP
> + .irq_set_affinity = irq_chip_set_affinity_parent,
> +#endif
> +};
I'm surprised that you don't implement irq_set_wake. Do you wake-up on
*any* interrupt?
> +
> +static int mtk_cirq_domain_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + if (is_of_node(fwspec->fwnode)) {
> + if (fwspec->param_count != 3)
> + return -EINVAL;
> +
> + /* No PPI should point to this domain */
> + if (fwspec->param[0] != 0)
> + return -EINVAL;
> +
> + /* cirq support irq number check */
> + if (fwspec->param[1] < ;)
> + return -EINVAL;
> +
> + *hwirq = fwspec->param[1];
So if you turn this into:
*hwirq = fwspec->param[1] - cirq_data->ext_irq_start;
and drop the above offset computing in your write function, you'd have
something that'd make a bit more sense.
> + *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int mtk_cirq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> + unsigned int nr_irqs, void *arg)
> +{
> + int i;
> + irq_hw_number_t hwirq;
> + struct irq_fwspec *fwspec = arg;
> + struct irq_fwspec parent_fwspec = *fwspec;
> +
> + if (fwspec->param_count != 3)
> + return -EINVAL;
> +
> + /* cirq doesn't support PPI */
> + if (fwspec->param[0])
> + return -EINVAL;
> +
> + if (fwspec->param[1] < cirq_data->ext_irq_start)
> + return -EINVAL;
> +
> + hwirq = fwspec->param[1];
> + for (i = 0; i < nr_irqs; i++)
> + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
> + &mtk_cirq_chip,
> + domain->host_data);
> +
> + parent_fwspec.fwnode = domain->parent->fwnode;
> + return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
> + &parent_fwspec);
> +}
> +
> +static const struct irq_domain_ops cirq_domain_ops = {
> + .translate = mtk_cirq_domain_translate,
> + .alloc = mtk_cirq_domain_alloc,
> + .free = irq_domain_free_irqs_common,
> +};
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int mtk_cirq_suspend(void)
> +{
> + u32 value;
> +
> + /* set edge_only mode, record edge-triggerd interrupts */
> + /* enable cirq */
> + value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
> + value |= (CIRQ_EDGE | CIRQ_EN);
> + writel(value, cirq_data->base + CIRQ_CONTROL);
> + return 0;
> +}
> +
> +static void mtk_cirq_resume(void)
> +{
> + u32 value;
> +
> + /* flush recored interrupts, will send signals to parent controller */
> + value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
> + writel(value | CIRQ_FLUSH, cirq_data->base + CIRQ_CONTROL);
> +
> + /* disable cirq */
> + value = readl_relaxed(cirq_data->base + CIRQ_CONTROL);
> + value &= ~(CIRQ_EDGE | CIRQ_EN);
> + writel(value, cirq_data->base + CIRQ_CONTROL);
> +}
> +
> +static struct syscore_ops mtk_cirq_syscore_ops = {
> + .suspend = mtk_cirq_suspend,
> + .resume = mtk_cirq_resume,
> +};
> +
> +static void mtk_cirq_syscore_init(void)
> +{
> + register_syscore_ops(&mtk_cirq_syscore_ops);
> +}
> +#else
> +static inline void mtk_cirq_syscore_init(void) {}
> +#endif
> +
> +static int __init mtk_cirq_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct irq_domain *domain, *domain_parent;
> + int ret;
> +
> + domain_parent = irq_find_host(parent);
> + if (!domain_parent) {
> + pr_err("mtk_cirq: interrupt-parent not found\n");
> + return -EINVAL;
> + }
> +
> + cirq_data = kzalloc(sizeof(*cirq_data), GFP_KERNEL);
> + if (!cirq_data)
> + return -ENOMEM;
> +
> + cirq_data->base = of_iomap(node, 0);
> + if (!cirq_data->base) {
> + pr_err("mtk_cirq: unable to map cirq register\n");
> + ret = -ENXIO;
> + goto out_free;
> + }
> +
> + if (of_property_read_u32(node, "mediatek,ext-irq-start",
> + &cirq_data->ext_irq_start)) {
> + ret = -EINVAL;
> + goto out_free;
> + }
> +
> + domain = irq_domain_add_hierarchy(domain_parent, 0, CIRQ_IRQ_NUM, node,
> + &cirq_domain_ops, cirq_data);
> + if (!domain) {
> + ret = -ENOMEM;
> + goto out_unmap;
> + }
> +
> + mtk_cirq_syscore_init();
> +
> + return 0;
> +
> +out_unmap:
> + iounmap(cirq_data->base);
> +out_free:
> + kfree(cirq_data);
> + return ret;
> +}
> +
> +IRQCHIP_DECLARE(mtk_cirq, "mediatek,mt2701-cirq", mtk_cirq_of_init);
Thanks,
M.
--
Jazz is not dead. It just smells funny.
More information about the Linux-mediatek
mailing list