[PATCH v10 08/13] drm/mediatek: add dsi transfer function
YT Shen
yt.shen at mediatek.com
Fri Nov 25 02:34:31 PST 2016
From: shaoming chen <shaoming.chen at mediatek.com>
add dsi read/write commands for transfer function
Signed-off-by: shaoming chen <shaoming.chen at mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 168 ++++++++++++++++++++++++++++++++++++-
1 file changed, 166 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index d236e2d..d03a0f1 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -24,6 +24,7 @@
#include <linux/of_graph.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <video/mipi_display.h>
#include <video/videomode.h>
#include "mtk_drm_ddp_comp.h"
@@ -80,8 +81,16 @@
#define DSI_HBP_WC 0x54
#define DSI_HFP_WC 0x58
+#define DSI_CMDQ_SIZE 0x60
+#define CMDQ_SIZE 0x3f
+
#define DSI_HSTX_CKL_WC 0x64
+#define DSI_RX_DATA0 0x74
+#define DSI_RX_DATA1 0x78
+#define DSI_RX_DATA2 0x7c
+#define DSI_RX_DATA3 0x80
+
#define DSI_RACK 0x84
#define RACK BIT(0)
@@ -117,8 +126,23 @@
#define CLK_HS_POST (0xff << 8)
#define CLK_HS_EXIT (0xff << 16)
+#define DSI_CMDQ0 0x180
+#define CONFIG (0xff << 0)
+#define SHORT_PACKET 0
+#define LONG_PACKET 2
+#define BTA BIT(2)
+#define DATA_ID (0xff << 8)
+#define DATA_0 (0xff << 16)
+#define DATA_1 (0xff << 24)
+
#define NS_TO_CYCLE(n, c) ((n) / (c) + (((n) % (c)) ? 1 : 0))
+#define MTK_DSI_HOST_IS_READ(type) \
+ ((type == MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM) || \
+ (type == MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM) || \
+ (type == MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM) || \
+ (type == MIPI_DSI_DCS_READ))
+
struct phy;
struct mtk_dsi {
@@ -465,12 +489,12 @@ static void mtk_dsi_irq_data_set(struct mtk_dsi *dsi, u32 irq_bit)
dsi->irq_data |= irq_bit;
}
-static __maybe_unused void mtk_dsi_irq_data_clear(struct mtk_dsi *dsi, u32 irq_bit)
+static void mtk_dsi_irq_data_clear(struct mtk_dsi *dsi, u32 irq_bit)
{
dsi->irq_data &= ~irq_bit;
}
-static __maybe_unused s32 mtk_dsi_wait_for_irq_done(struct mtk_dsi *dsi, u32 irq_flag,
+static s32 mtk_dsi_wait_for_irq_done(struct mtk_dsi *dsi, u32 irq_flag,
unsigned int timeout)
{
s32 ret = 0;
@@ -807,9 +831,149 @@ static int mtk_dsi_host_detach(struct mipi_dsi_host *host,
return 0;
}
+static void mtk_dsi_wait_for_idle(struct mtk_dsi *dsi)
+{
+ u32 timeout_ms = 500000; /* total 1s ~ 2s timeout */
+
+ while (timeout_ms--) {
+ if (!(readl(dsi->regs + DSI_INTSTA) & DSI_BUSY))
+ break;
+
+ usleep_range(2, 4);
+ }
+
+ if (timeout_ms == 0) {
+ DRM_WARN("polling dsi wait not busy timeout!\n");
+
+ mtk_dsi_enable(dsi);
+ mtk_dsi_reset_engine(dsi);
+ }
+}
+
+static u32 mtk_dsi_recv_cnt(u8 type, u8 *read_data)
+{
+ switch (type) {
+ case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
+ case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
+ return 1;
+ case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
+ case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
+ return 2;
+ case MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE:
+ case MIPI_DSI_RX_DCS_LONG_READ_RESPONSE:
+ return read_data[1] + read_data[2] * 16;
+ case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
+ DRM_INFO("type is 0x02, try again\n");
+ break;
+ default:
+ DRM_INFO("type(0x%x) cannot be non-recognite\n", type);
+ break;
+ }
+
+ return 0;
+}
+
+static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
+{
+ const char *tx_buf = msg->tx_buf;
+ u8 config, cmdq_size, cmdq_off, type = msg->type;
+ u32 reg_val, cmdq_mask, i;
+
+ if (MTK_DSI_HOST_IS_READ(type))
+ config = BTA;
+ else
+ config = (msg->tx_len > 2) ? LONG_PACKET : SHORT_PACKET;
+
+ if (msg->tx_len > 2) {
+ cmdq_size = 1 + (msg->tx_len + 3) / 4;
+ cmdq_off = 4;
+ cmdq_mask = CONFIG | DATA_ID | DATA_0 | DATA_1;
+ reg_val = (msg->tx_len << 16) | (type << 8) | config;
+ } else {
+ cmdq_size = 1;
+ cmdq_off = 2;
+ cmdq_mask = CONFIG | DATA_ID;
+ reg_val = (type << 8) | config;
+ }
+
+ for (i = 0; i < msg->tx_len; i++)
+ writeb(tx_buf[i], dsi->regs + DSI_CMDQ0 + cmdq_off + i);
+
+ mtk_dsi_mask(dsi, DSI_CMDQ0, cmdq_mask, reg_val);
+ mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, cmdq_size);
+}
+
+static ssize_t mtk_dsi_host_send_cmd(struct mtk_dsi *dsi,
+ const struct mipi_dsi_msg *msg, u8 flag)
+{
+ mtk_dsi_wait_for_idle(dsi);
+ mtk_dsi_irq_data_clear(dsi, flag);
+ mtk_dsi_cmdq(dsi, msg);
+ mtk_dsi_start(dsi);
+
+ if (!mtk_dsi_wait_for_irq_done(dsi, flag, 2000))
+ return -ETIME;
+ else
+ return 0;
+}
+
+static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ struct mtk_dsi *dsi = host_to_dsi(host);
+ u32 recv_cnt, i;
+ u8 read_data[16];
+ void *src_addr;
+ u8 irq_flag = CMD_DONE_INT_FLAG;
+
+ if (readl(dsi->regs + DSI_MODE_CTRL) & MODE) {
+ DRM_ERROR("dsi engine is not command mode\n");
+ return -EINVAL;
+ }
+
+ if (MTK_DSI_HOST_IS_READ(msg->type))
+ irq_flag |= LPRX_RD_RDY_INT_FLAG;
+
+ if (mtk_dsi_host_send_cmd(dsi, msg, irq_flag) < 0)
+ return -ETIME;
+
+ if (!MTK_DSI_HOST_IS_READ(msg->type))
+ return 0;
+
+ if (!msg->rx_buf) {
+ DRM_ERROR("dsi receive buffer size may be NULL\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 16; i++)
+ *(read_data + i) = readb(dsi->regs + DSI_RX_DATA0 + i);
+
+ recv_cnt = mtk_dsi_recv_cnt(read_data[0], read_data);
+
+ if (recv_cnt > 2)
+ src_addr = &read_data[4];
+ else
+ src_addr = &read_data[1];
+
+ if (recv_cnt > 10)
+ recv_cnt = 10;
+
+ if (recv_cnt > msg->rx_len)
+ recv_cnt = msg->rx_len;
+
+ if (recv_cnt)
+ memcpy(msg->rx_buf, src_addr, recv_cnt);
+
+ DRM_INFO("dsi get %d byte data from the panel address(0x%x)\n",
+ recv_cnt, *((u8 *)(msg->tx_buf)));
+
+ return recv_cnt;
+}
+
static const struct mipi_dsi_host_ops mtk_dsi_ops = {
.attach = mtk_dsi_host_attach,
.detach = mtk_dsi_host_detach,
+ .transfer = mtk_dsi_host_transfer,
};
static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
--
1.9.1
More information about the Linux-mediatek
mailing list