[PATCH v2 1/3] dt-bindings: mediatek: Add a binding for Mediatek JPEG Decoder

[Laurent Pinchart]

Hi Rick,

On Friday 04 Nov 2016 12:51:00 Rick Chang wrote:
> On Thu, 2016-11-03 at 20:34 +0200, Laurent Pinchart wrote:
> > On Thursday 03 Nov 2016 20:33:12 Laurent Pinchart wrote:
> >> On Monday 31 Oct 2016 15:16:55 Rick Chang wrote:
> >>> Add a DT binding documentation for Mediatek JPEG Decoder of
> >>> MT2701 SoC.
> >>> 
> >>> Signed-off-by: Rick Chang <rick.chang at mediatek.com>
> >>> Signed-off-by: Minghsiu Tsai <minghsiu.tsai at mediatek.com>
> >>> ---
> >>> 
> >>>  .../bindings/media/mediatek-jpeg-codec.txt         | 35 ++++++++++++++
> >>>  1 file changed, 35 insertions(+)
> >>>  create mode 100644
> >>> Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt
> >>> 
> >>> diff --git
> >>> a/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt
> >>> b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt new
> >>> file mode 100644
> >>> index 0000000..514e656
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt
> >>> @@ -0,0 +1,35 @@
> >>> +* Mediatek JPEG Codec
> >> 
> >> Is it a codec or a decoder only ?
> >> 
> >>> +Mediatek JPEG Codec device driver is a v4l2 driver which can decode
> >>> +JPEG-encoded video frames.
> >> 
> >> DT bindings should not reference drivers, they are OS-agnostic.
> >> 
> >>> +Required properties:
> >>> +  - compatible : "mediatek,mt2701-jpgdec"
> > 
> > Is the JPEG decoder found in MT2701 only, or in other Mediatek SoCs as
> > well ?
>
> Yes, the JPEG decoder is found in other Mediatek SoCs. However, the JPEG
> decoder HW in different SoCs have different register base, interrupt,
> power-domain and iommu setting.

That's fine, and that's exactly what the device tree is used for. When an 
identical IP core is integrated differently in different SoCs, the driver 
retrieves the resources (base address, clocks, IOMMU, interrupt, power domain 
and more) from the device tree without any need for SoC-specific code.

> This patch series is only applicable in MT2701.

That was precisely my question, apart from integration properties, is there 
anything specific to the MT2701 in patches 1/3 and 2/3 ?

-- 
Regards,

Laurent Pinchart