[PATCH v2 4/5] iommu/mediatek: add support for mtk iommu generation one HW

Honghui Zhang honghui.zhang at mediatek.com
Wed May 25 00:58:50 PDT 2016


On Tue, 2016-05-24 at 16:36 +0100, Robin Murphy wrote:
> On 24/05/16 10:57, Honghui Zhang wrote:
> [...]
> >>> @@ -48,6 +48,9 @@ struct mtk_iommu_domain {
> >>>    	struct io_pgtable_ops		*iop;
> >>>
> >>>    	struct iommu_domain		domain;
> >>> +	void				*pgt_va;
> >>> +	dma_addr_t			pgt_pa;
> >>> +	void				*cookie;
> >>
> >> These are going to be mutually exclusive with the cfg and iop members,
> >> which implies it might be a good idea to use a union and not waste
> >> space. Or better, just forward-declare struct mtk_iommu_domain here and
> >> leave separate definitions private to each driver. The void *cookie is
> >> also an unnecessary level of abstraction, I think.
> >>
> >
> > Do you mean declare struct mtk_iommu_domain here, and implement a new
> > struct in mtk_iommu_v1.c like
> > struct mtk_iommu_domain_v1 {
> > 	struct mtk_iommu_domain	domain;
> > 	u32			*pgt_va;
> > 	dma_addr_t		pgt_pa;
> > 	mtk_iommu_data		*data;
> > };
> > If this is acceptable I would implement it in the next version.
> 
> Pretty much, except they both want to be called struct mtk_iommu_domain, 
> so that a *declaration* for the sake of the m4u_dom member of struct 
> mtk_iommu_data in the header file can remain common to both drivers - it 
> then just picks up whichever private *definition* from the .c file being 
> compiled.

I will follow your advise in the next version, thanks very much.

> 
> >>>    };
> >>>
> >>>    struct mtk_iommu_data {
> >>> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> >>> new file mode 100644
> >>> index 0000000..55023e1
> >>> --- /dev/null
> >>> +++ b/drivers/iommu/mtk_iommu_v1.c
> >>> @@ -0,0 +1,742 @@
> >>> +/*
> >>> + * Copyright (c) 2015-2016 MediaTek Inc.
> >>> + * Author: Yong Wu <yong.wu at mediatek.com>
> >>
> >> Nit: is that in the sense that this patch should also have Yong's
> >> signed-off-by on it, or in that it's your work derived from his version
> >> in mtk_iommu.c?
> >
> > I write this driver based on Yong's version of mtk_iommu.c, should I add
> > his signed-off-by for this patch? Or should I put a comment about this?
> > Thanks.
> 
> OK, in that case I think the appropriate attribution would be along the 
> lines of "Author: Honghui Zhang, based on mtk_iommu.c by Yong Wu" (if in 
> doubt, grepping for "Based on" gives a feel for how this is commonly 
> done). If the work that comprises this patch itself (i.e. the copying 
> and modification of the existing code) is all yours then your sign-off 
> alone is fine.
> 
> [...]
> >>> +static int mtk_iommu_add_device(struct device *dev)
> >>> +{
> >>> +	struct iommu_group *group;
> >>> +	struct device_node *np;
> >>> +	struct of_phandle_args iommu_spec;
> >>> +	int idx = 0;
> >>> +
> >>> +	while (!of_parse_phandle_with_args(dev->of_node, "iommus",
> >>> +				   "#iommu-cells", idx,
> >>> +				   &iommu_spec)) {
> >>
> >> Hang on, this doesn't seem right - why do you need to reimplement all
> >> this instead of using IOMMU_OF_DECLARE()?
> >
> > All the clients of mtk generation one iommu share the same iommu domain,
> > as a matter of fact, mtk generation one iommu only support one iommu
> > domain. ALl the clients share the same iova address and use the same
> > pagetable. That means all iommu clients needed to be attached to the
> > same dma_iommu_mapping.
> 
> Ugh, right - I'd forgotten that the arch/arm DMA mapping code doesn't 
> respect IOMMU groups or default domains at all. That's the real root 
> cause of the issue here.
> 
> > If use IOMMU_OF_DELCARE, we need to call of_iommu_set_ops to set the
> > iommu_ops, I do not want the iommu_ops be set since it would cause iommu
> > client device in different dma_iommu_mapping.
> >
> > When an iommu client device has been created, the following sequence is
> > called.
> >
> > of_platform_device_create
> > 	->of_dma_config
> > 		->arch_setup_dma_ops
> > 			->arch_setup_iommu_dma_ops
> > In this function of arch_setup_iommu_dma_ops would create a new
> > dma_iommu_mapping for each iommu client device and then attach the
> > device to this new dma_iommu_mapping. Since all the iommu clients share
> > the very same pagetable, this will not workable for our HW.
> > I could not release the dma_iommu_mapping in attach_device since the
> > to_dma_iommu_mapping was set after device_attached.
> > Any suggest for this?
> 
> On a second look, you're doing more or less the same thing that the 
> Renesas IPMMU driver currently does, so it's probably OK as a workaround 
> for now. Fixing the arch/arm code is part of the bigger ongoing problem 
> of sorting out IOMMU probing and DMA configuration, and it doesn't seem 
> fair to force that on you for the sake of one driver ;)
> 

Yes, I did read the IPMMU driver before I coding this driver. Thanks.

> [...]
> >>> +static int __maybe_unused mtk_iommu_resume(struct device *dev)
> >>> +{
> >>> +	struct mtk_iommu_data *data = dev_get_drvdata(dev);
> >>> +	struct mtk_iommu_suspend_reg *reg = &data->reg;
> >>> +	void __iomem *base = data->base;
> >>> +
> >>> +	writel_relaxed(data->m4u_dom->pgt_pa, base + REG_MMU_PT_BASE_ADDR);
> >>
> >> Hmm, this looks like the only case where m4u_dom actually seems
> >> necessary - I'm pretty sure all the others could be fairly easily
> >> reworked to not use it (I might try having a quick hack at the existing
> >> M4U driver to see) - at which point we could just explicitly
> >> save/restore the base register here and get rid of m4u_dom entirely.
> >
> > Let me take a while to think about this.
> 
> That was true in the context of arm64, but you're right that the current 
> state of the 32-bit code does make m4u_dom more necessary, so I guess we 
> may as well leave it as-is for now.
> 
> Robin.

Thanks very much for your comments.
I will fix all of this later.





More information about the Linux-mediatek mailing list