Applied "regulator: mt6397: Add buck change mode regulator interface for mt6397" to the regulator tree
Mark Brown
broonie at kernel.org
Mon May 23 10:50:50 PDT 2016
The patch
regulator: mt6397: Add buck change mode regulator interface for mt6397
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 6d26507bd45bf09374d3744ee07fabebc87266f5 Mon Sep 17 00:00:00 2001
From: Henry Chen <henryc.chen at mediatek.com>
Date: Mon, 23 May 2016 15:13:31 +0800
Subject: [PATCH] regulator: mt6397: Add buck change mode regulator interface
for mt6397
BUCKs of mt6397 have auto mode and pwm mode.
User can use regulator interfaces to control modes
Signed-off-by: Henry Chen <henryc.chen at mediatek.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
drivers/regulator/mt6397-regulator.c | 89 ++++++++++++++++++++++++++++++++----
1 file changed, 80 insertions(+), 9 deletions(-)
diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c
index 1c45abb94409..c6c6aa85e4e8 100644
--- a/drivers/regulator/mt6397-regulator.c
+++ b/drivers/regulator/mt6397-regulator.c
@@ -23,6 +23,9 @@
#include <linux/regulator/mt6397-regulator.h>
#include <linux/regulator/of_regulator.h>
+#define MT6397_BUCK_MODE_AUTO 0
+#define MT6397_BUCK_MODE_FORCE_PWM 1
+
/*
* MT6397 regulators' information
*
@@ -38,10 +41,14 @@ struct mt6397_regulator_info {
u32 vselon_reg;
u32 vselctrl_reg;
u32 vselctrl_mask;
+ u32 modeset_reg;
+ u32 modeset_mask;
+ u32 modeset_shift;
};
#define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
- vosel, vosel_mask, voselon, vosel_ctrl) \
+ vosel, vosel_mask, voselon, vosel_ctrl, _modeset_reg, \
+ _modeset_shift) \
[MT6397_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
@@ -62,6 +69,9 @@ struct mt6397_regulator_info {
.vselon_reg = voselon, \
.vselctrl_reg = vosel_ctrl, \
.vselctrl_mask = BIT(1), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = BIT(_modeset_shift), \
+ .modeset_shift = _modeset_shift \
}
#define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
@@ -145,6 +155,63 @@ static const u32 ldo_volt_table7[] = {
1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000,
};
+static int mt6397_regulator_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct mt6397_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret, val;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = MT6397_BUCK_MODE_FORCE_PWM;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = MT6397_BUCK_MODE_AUTO;
+ break;
+ default:
+ ret = -EINVAL;
+ goto err_mode;
+ }
+
+ dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x, %#x\n",
+ info->modeset_reg, info->modeset_mask,
+ info->modeset_shift, val);
+
+ val <<= info->modeset_shift;
+ ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+ info->modeset_mask, val);
+err_mode:
+ if (ret != 0) {
+ dev_err(&rdev->dev,
+ "Failed to set mt6397 buck mode: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static unsigned int mt6397_regulator_get_mode(struct regulator_dev *rdev)
+{
+ struct mt6397_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret, regval;
+
+ ret = regmap_read(rdev->regmap, info->modeset_reg, ®val);
+ if (ret != 0) {
+ dev_err(&rdev->dev,
+ "Failed to get mt6397 buck mode: %d\n", ret);
+ return ret;
+ }
+
+ switch ((regval & info->modeset_mask) >> info->modeset_shift) {
+ case MT6397_BUCK_MODE_AUTO:
+ return REGULATOR_MODE_NORMAL;
+ case MT6397_BUCK_MODE_FORCE_PWM:
+ return REGULATOR_MODE_FAST;
+ default:
+ return -EINVAL;
+ }
+}
+
static int mt6397_get_status(struct regulator_dev *rdev)
{
int ret;
@@ -170,6 +237,8 @@ static const struct regulator_ops mt6397_volt_range_ops = {
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.get_status = mt6397_get_status,
+ .set_mode = mt6397_regulator_set_mode,
+ .get_mode = mt6397_regulator_get_mode,
};
static const struct regulator_ops mt6397_volt_table_ops = {
@@ -196,28 +265,30 @@ static const struct regulator_ops mt6397_volt_fixed_ops = {
static struct mt6397_regulator_info mt6397_regulators[] = {
MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f,
- MT6397_VCA15_CON10, MT6397_VCA15_CON5),
+ MT6397_VCA15_CON10, MT6397_VCA15_CON5, MT6397_VCA15_CON2, 11),
MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f,
- MT6397_VPCA7_CON10, MT6397_VPCA7_CON5),
+ MT6397_VPCA7_CON10, MT6397_VPCA7_CON5, MT6397_VPCA7_CON2, 8),
MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9,
- 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5),
+ 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5,
+ MT6397_VSRMCA15_CON2, 8),
MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9,
- 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5),
+ 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5,
+ MT6397_VSRMCA7_CON2, 8),
MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250,
buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f,
- MT6397_VCORE_CON10, MT6397_VCORE_CON5),
+ MT6397_VCORE_CON10, MT6397_VCORE_CON5, MT6397_VCORE_CON2, 8),
MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1,
MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f,
- MT6397_VGPU_CON10, MT6397_VGPU_CON5),
+ MT6397_VGPU_CON10, MT6397_VGPU_CON5, MT6397_VGPU_CON2, 8),
MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2,
MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f,
- MT6397_VDRM_CON10, MT6397_VDRM_CON5),
+ MT6397_VDRM_CON10, MT6397_VDRM_CON5, MT6397_VDRM_CON2, 8),
MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000,
buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f,
- MT6397_VIO18_CON10, MT6397_VIO18_CON5),
+ MT6397_VIO18_CON10, MT6397_VIO18_CON5, MT6397_VIO18_CON2, 8),
MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000),
MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000),
MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1,
--
2.8.1
More information about the Linux-mediatek
mailing list