[PATCH] usb: xhci-mtk: fixup mouse wakeup failure during system suspend
chunfeng yun
chunfeng.yun at mediatek.com
Tue May 3 00:44:18 PDT 2016
Hi Mathias,
On Thu, 2016-04-21 at 10:04 +0800, Chunfeng Yun wrote:
> Click mouse after xhci suspend completion but before system suspend
> completion, system will not be waken up by mouse if the duration of
> them is larger than 20ms which is the device UFP's resume signaling
> lasted. Another reason is that the SPM is not enabled before system
> suspend compeltion, this causes SPM also not notice the resume signal.
> So in order to reduce the duration less than 20ms, make use of
> syscore's suspend/resume interface.
> In fact it is a work around solution which only reduces the
> probability of failure, because we can't ensure that the duration from
> syscore's suspend completion to SPM working is always less than 20ms.
>
> Because the syscore runs on irq disabled context, and xhci's
> suspend/resume calls some sleeping functions, enable local irq
> and then disable it during suspend/resume. This may be not a problem,
> since only boot CPU is runing.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
> drivers/usb/host/xhci-mtk.c | 31 ++++++++++++++++++++++++++++++-
> 1 file changed, 30 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index 79959f1..8277f02 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -28,6 +28,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/regmap.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/syscore_ops.h>
>
> #include "xhci.h"
> #include "xhci-mtk.h"
> @@ -490,6 +491,8 @@ static int xhci_mtk_setup(struct usb_hcd *hcd)
> return xhci_gen_setup(hcd, xhci_mtk_quirks);
> }
>
> +static struct device *xhci_mtk_syscore_dev;
> +
> static int xhci_mtk_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -512,6 +515,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> if (!mtk)
> return -ENOMEM;
>
> + xhci_mtk_syscore_dev = dev;
> mtk->dev = dev;
> mtk->vbus = devm_regulator_get(dev, "vbus");
> if (IS_ERR(mtk->vbus)) {
> @@ -740,6 +744,29 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
> return 0;
> }
>
> +static int xhci_mtk_syscore_suspend(void)
> +{
> + local_irq_enable();
> + xhci_mtk_suspend(xhci_mtk_syscore_dev);
> + local_irq_disable();
> +
> + return 0;
> +}
> +
> +static void xhci_mtk_syscore_resume(void)
> +{
> + local_irq_enable();
> + xhci_mtk_resume(xhci_mtk_syscore_dev);
> + local_irq_disable();
> +
> + return;
> +}
> +
> +static struct syscore_ops xhci_mtk_syscore_ops = {
> + .suspend = xhci_mtk_syscore_suspend,
> + .resume = xhci_mtk_syscore_resume,
> +};
> +
> static const struct dev_pm_ops xhci_mtk_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume)
> };
> @@ -758,7 +785,7 @@ static struct platform_driver mtk_xhci_driver = {
> .remove = xhci_mtk_remove,
> .driver = {
> .name = "xhci-mtk",
> - .pm = DEV_PM_OPS,
> + /*.pm = DEV_PM_OPS,*/
> .of_match_table = of_match_ptr(mtk_xhci_of_match),
> },
> };
> @@ -766,6 +793,7 @@ MODULE_ALIAS("platform:xhci-mtk");
>
> static int __init xhci_mtk_init(void)
> {
> + register_syscore_ops(&xhci_mtk_syscore_ops);
> xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides);
> return platform_driver_register(&mtk_xhci_driver);
> }
> @@ -774,6 +802,7 @@ module_init(xhci_mtk_init);
> static void __exit xhci_mtk_exit(void)
> {
> platform_driver_unregister(&mtk_xhci_driver);
> + unregister_syscore_ops(&xhci_mtk_syscore_ops);
> }
> module_exit(xhci_mtk_exit);
Do you have any suggestions about the patch?
Thanks
>
More information about the Linux-mediatek
mailing list