[PATCH] dt-bindings: MediaTek: Add binding document for the AUXADC

[Eddie Huang]

Hi Matthias,

On Mon, 2016-03-07 at 14:52 +0800, Sascha Hauer wrote:
> On Wed, Feb 24, 2016 at 07:34:19PM +0100, Matthias Brugger wrote:
> > 
> > 
> > On 24/02/16 16:12, Sascha Hauer wrote:
> > >Hi Matthias,
> > >
> > >On Wed, Feb 24, 2016 at 03:36:46PM +0100, Matthias Brugger wrote:
> > >>
> > >>
> > >>On 23/02/16 21:32, Rob Herring wrote:
> > >>>On Fri, Feb 19, 2016 at 08:18:46AM +0100, Sascha Hauer wrote:
> > >>>>Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > >>>>---
> > >>>>
> > >>>>This is a supplement to the MTK Thermal series which was lacking the
> > >>>>description for the AUXADC.
> > >>>
> > >>>So it will be applied with that I presume.
> > >>>
> > >>>Acked-by: Rob Herring <robh at kernel.org>
> > >>>
> > >>
> > >>Well the basic problem that I see is, that the auxadc has some more
> > >>registers (at least in mt6589) for the touch screen registers.
> > >>So this makes it a candidate for syscon and regmap.
> > >>But this needs a patch in the thermal driver first...
> > >
> > >When we want to have a driver for the auxadc we are free to write one.
> > >No need to use syscon and/or regmap for it.
> > >
> > >Note that the auxadc is not used by the thermal *driver*, it's used by
> > >the thermal *hardware*. It's the hardware that directly reads/writes
> > >auxadc registers. If MTK did it right then a real auxadc driver should
> > >not be disturbed by the thermal controller accesses. At least from
> > 
> > Right, didn't realize this.
> > 
> > >checking the datasheet the registers the thermal controller accesses
> > >are completely orthogonal to the ones a auxadc driver would use.
> > >
> > 
> > As you already explained, syscon/regmap is not needed here. Just for
> > completion: we already had completely orthogonal registers for the reset
> > controller, and we decided to use regmap there as well.
> > We should stay consistent on this.
> 
> Matthias, is this some kind of action topic for me? We can use regmap
> for the AUXADC driver if we want to, I have no problem with that.
> 

So you want to add 
  compatible = "mediatek,mt8173-auxadc", "syscon";

And use regmap to access auxadc register in thermal driver. Then you
will accept this patch and thermal dts patch, right ?

Eddie