[PATCH v9 1/4] dt-bindings: soc: Add documentation for the MediaTek GCE unit
HS Liao
hs.liao at mediatek.com
Thu Jun 30 00:14:40 PDT 2016
This adds documentation for the MediaTek Global Command Engine (GCE) unit
found in MT8173 SoCs.
Signed-off-by: HS Liao <hs.liao at mediatek.com>
Acked-by: Rob Herring <robh at kernel.org>
---
.../devicetree/bindings/soc/mediatek/gce.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/mediatek/gce.txt
diff --git a/Documentation/devicetree/bindings/soc/mediatek/gce.txt b/Documentation/devicetree/bindings/soc/mediatek/gce.txt
new file mode 100644
index 0000000..63c5364
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/gce.txt
@@ -0,0 +1,44 @@
+MediaTek GCE
+===============
+
+The Global Command Engine (GCE) is used to help read/write registers with
+critical time limitation, such as updating display configuration during the
+vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+CMDQ driver uses mailbox framework for communication. Please refer to
+../../mailbox/mailbox.txt for generic information about mailbox device-tree
+bindings.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-gce"
+- reg: Address range of the GCE unit
+- interrupts: The interrupt signal from the GCE block
+- clock: Clocks according to the common clock binding
+- clock-names: Must be "gce" to stand for GCE clock
+- #mbox-cells: Should be 1
+
+Required properties for a client device:
+- mediatek,gce: Should point to the respective GCE block
+- mboxes: List of phandle, mailbox channel specifiers, and merging wfe flag.
+
+Example:
+
+ gce: gce at 10212000 {
+ compatible = "mediatek,mt8173-gce";
+ reg = <0 0x10212000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_GCE>;
+ clock-names = "gce";
+
+ #mbox-cells = <1>;
+ };
+
+Example for a client device:
+
+ mmsys: clock-controller at 14000000 {
+ compatible = "mediatek,mt8173-mmsys";
+ mediatek,gce = <&gce>;
+ mboxes = <&gce 0 1 /* main display with merging wfe */
+ &gce 1 1>; /* sub display with merging wfe */
+ ...
+ };
--
1.9.1
More information about the Linux-mediatek
mailing list