[PATCH v2] i2c: mt8173: add 4GB mode support in i2c driver.
Daniel Kurtz
djkurtz at chromium.org
Thu Jan 28 23:34:22 PST 2016
On Fri, Jan 29, 2016 at 7:06 AM, Liguo Zhang <liguo.zhang at mediatek.com> wrote:
> If 4GB mode is enable, we should add 4gb mode support in i2c driver.
> Set 4GB mode register to support 4GB mode.
>
> Signed-off-by: Liguo Zhang <liguo.zhang at mediatek.com>
> ---
> change in v2:
> Define a static inline funtion mtk_i2c_set_4g_mode() for support 4g mode.
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 51 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index aec8e6c..f5734e6 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -60,6 +60,7 @@
> #define I2C_DMA_INT_FLAG_NONE 0x0000
> #define I2C_DMA_CLR_FLAG 0x0000
> #define I2C_DMA_HARD_RST 0x0002
> +#define I2C_DMA_4G_MODE 0x0001
>
> #define I2C_DEFAULT_SPEED 100000 /* hz */
> #define MAX_FS_MODE_SPEED 400000
> @@ -88,6 +89,8 @@ enum DMA_REGS_OFFSET {
> OFFSET_RX_MEM_ADDR = 0x20,
> OFFSET_TX_LEN = 0x24,
> OFFSET_RX_LEN = 0x28,
> + OFFSET_TX_4G_MODE = 0x54,
> + OFFSET_RX_4G_MODE = 0x58,
> };
>
> enum i2c_trans_st_rs {
> @@ -133,6 +136,7 @@ struct mtk_i2c_compatible {
> unsigned char dcm: 1;
> unsigned char auto_restart: 1;
> unsigned char aux_len_reg: 1;
> + unsigned char support_33bits: 1;
> };
>
> struct mtk_i2c {
> @@ -182,6 +186,7 @@ static const struct mtk_i2c_compatible mt6577_compat = {
> .dcm = 1,
> .auto_restart = 0,
> .aux_len_reg = 0,
> + .support_33bits = 0,
> };
>
> static const struct mtk_i2c_compatible mt6589_compat = {
> @@ -190,6 +195,7 @@ static const struct mtk_i2c_compatible mt6589_compat = {
> .dcm = 0,
> .auto_restart = 0,
> .aux_len_reg = 0,
> + .support_33bits = 0,
> };
>
> static const struct mtk_i2c_compatible mt8173_compat = {
> @@ -198,6 +204,7 @@ static const struct mtk_i2c_compatible mt8173_compat = {
> .dcm = 1,
> .auto_restart = 1,
> .aux_len_reg = 1,
> + .support_33bits = 1,
> };
>
> static const struct of_device_id mtk_i2c_of_match[] = {
> @@ -366,6 +373,30 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk,
> return 0;
> }
>
> +static inline void mtk_i2c_set_4g_mode(struct mtk_i2c *i2c, dma_addr_t wpaddr,
> + dma_addr_t rpaddr)
> +{
> + u32 reg_4g_mode;
> +
> + if (i2c->op == I2C_MASTER_RD) {
> + reg_4g_mode = (rpaddr & 0x100000000ULL) ? I2C_DMA_4G_MODE :
> + I2C_DMA_CLR_FLAG;\
Sorry, I just meant to inline the computation of reg_4g_mode:
static u32 mtk_i2c_4g_mode(dma_addr_t addr)
{
return (addr & BIT(33)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
}
> + writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
> + } else if (i2c->op == I2C_MASTER_WR) {
> + reg_4g_mode = (wpaddr & 0x100000000ULL) ? I2C_DMA_4G_MODE :
> + I2C_DMA_CLR_FLAG;
> + writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
> + } else {
> + reg_4g_mode = (wpaddr & 0x100000000ULL) ? I2C_DMA_4G_MODE :
> + I2C_DMA_CLR_FLAG;
> + writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
> +
> + reg_4g_mode = (rpaddr & 0x100000000ULL) ? I2C_DMA_4G_MODE :
> + I2C_DMA_CLR_FLAG;
> + writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
> + }
> +}
> +
> static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> int num, int left_num)
> {
> @@ -439,6 +470,10 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> msgs->len, DMA_FROM_DEVICE);
> if (dma_mapping_error(i2c->dev, rpaddr))
> return -ENOMEM;
> +
> + if (i2c->dev_comp->support_33bits)
> + mtk_i2c_set_4g_mode(i2c, 0, rpaddr);
> +
> writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
> writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
> } else if (i2c->op == I2C_MASTER_WR) {
> @@ -448,6 +483,10 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> msgs->len, DMA_TO_DEVICE);
> if (dma_mapping_error(i2c->dev, wpaddr))
> return -ENOMEM;
> +
> + if (i2c->dev_comp->support_33bits)
> + mtk_i2c_set_4g_mode(i2c, wpaddr, 0);
> +
> writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
> writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
> } else {
> @@ -465,6 +504,10 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> msgs->len, DMA_TO_DEVICE);
> return -ENOMEM;
> }
> +
> + if (i2c->dev_comp->support_33bits)
> + mtk_i2c_set_4g_mode(i2c, wpaddr, rpaddr);
> +
> writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
> writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
> writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
> @@ -729,6 +772,14 @@ static int mtk_i2c_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> + if (i2c->dev_comp->support_33bits) {
> + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
> + if (ret) {
> + dev_err(&pdev->dev, "dma_set_mask return error.\n");
> + return ret;
> + }
> + }
> +
> ret = mtk_i2c_clock_enable(i2c);
> if (ret) {
> dev_err(&pdev->dev, "clock enable failed!\n");
> --
> 1.8.1.1.dirty
>
More information about the Linux-mediatek
mailing list