[PATCH v4 0/5] pinctrl: mediatek: add pinctrl/GPIO/EINT driver for mt2701

[Biao Huang]

Change in v4:
1. create a sperate patch for direction setting of input-enable/disalbe and input-schmitt-enable/disable.

Change in v3:
1. convert to arch_initcall.
2. set direction to input when do input-enable/disable and input-schmitt-enable/disable properties.

Change in v2:
1. add special pinmux setting for some pins.
2. fix mt2701 direction control issue
3. resort dt-bindings

Biao Huang (4):
  pinctrl: mediatek: fix direction control issue
  pinctrl: dt bindings: Add pinfunc header file for mt2701
  pinctrl: mediatek: Add Pinctrl/GPIO/EINT driver for mt2701
  arm: dts: Add pinctrl/GPIO/EINT node for mt2701

Erin Lo (1):
  ARM: mediatek: Add MT2701 config options for mediatek SoCs.

 arch/arm/boot/dts/mt2701-pinfunc.h            |  735 ++++++++
 arch/arm/boot/dts/mt2701.dtsi                 |   19 +
 arch/arm/mach-mediatek/Kconfig                |    4 +
 drivers/pinctrl/mediatek/Kconfig              |    6 +
 drivers/pinctrl/mediatek/Makefile             |    1 +
 drivers/pinctrl/mediatek/pinctrl-mt2701.c     |  586 +++++++
 drivers/pinctrl/mediatek/pinctrl-mtk-common.c |   16 +
 drivers/pinctrl/mediatek/pinctrl-mtk-common.h |   12 +-
 drivers/pinctrl/mediatek/pinctrl-mtk-mt2701.h | 2323 +++++++++++++++++++++++++
 9 files changed, 3701 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/mt2701-pinfunc.h
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt2701.c
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt2701.h

-- 
1.7.9.5