[PATCH 2/3] thermal: Add Mediatek thermal controller support

Sascha Hauer s.hauer at pengutronix.de
Mon Jan 4 06:31:29 PST 2016


On Mon, Dec 21, 2015 at 12:07:58PM +0800, Daniel Kurtz wrote:
> Hi Sascha,
> 
> One nit below that can be fixed up later, or now if you don't plan to
> spin this driver to
> address Eduardo's feedback...
> 
> On Mon, Nov 30, 2015 at 7:42 PM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > This adds support for the Mediatek thermal controller found on MT8173
> > and likely other SoCs.
> > The controller is a bit special. It does not have its own ADC, instead
> > it controls the on-SoC AUXADC via AHB bus accesses. For this reason
> > we need the physical address of the AUXADC. Also it controls a mux
> > using AHB bus accesses, so we need the APMIXEDSYS physical address aswell.
> >
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> 
> [snip]
> 
> > +static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt)
> > +{
> > +       struct nvmem_cell *cell;
> > +       u32 *buf;
> > +       size_t len;
> > +       int i, ret = 0;
> > +
> > +       /* Start with default values */
> > +       mt->adc_ge = 512;
> > +       for (i = 0; i < MT8173_NUM_SENSORS; i++)
> > +               mt->vts[i] = 260;
> > +       mt->degc_cali = 40;
> > +       mt->o_slope = 0;
> > +
> > +       cell = nvmem_cell_get(dev, "calibration-data");
> > +       if (IS_ERR(cell)) {
> > +               if (PTR_ERR(cell) == -EPROBE_DEFER)
> 
> It is useful to know why the thermal driver is being probe defered, so
> I suggest here:
> dev_warn(dev, "Waiting for calibration data.\n");

The problem with that is that this message is not shown once but
possibly many times and may not even show a problem because in the end
the device may be probed successfully. In this case the last thing you
see from the device is "Waiting for calibration data." and get annoyed
by all this useless noise from the driver.

Of course I agree that this information may be useful in the case you
wonder why your device doesn't show up...

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the Linux-mediatek mailing list