[PATCH v5 0/8] Add MT8173 Video Encoder Driver and VPU Driver
Hans Verkuil
hverkuil at xs4all.nl
Wed Feb 24 00:30:47 PST 2016
Hi Tiffany,
On 02/24/16 09:23, tiffany lin wrote:
> Hi Hans,
>
> On Tue, 2016-02-23 at 09:47 +0100, Hans Verkuil wrote:
>> On 02/23/16 09:11, Tiffany Lin wrote:
>>> ==============
>>> Introduction
>>> ==============
>>>
>>> The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs.
>>> Mediatek Video Codec is able to handle video encoding of in a range of formats.
>>>
>>> This patch series also include VPU driver. Mediatek Video Codec driver rely on VPU driver to load,
>>> communicate with VPU.
>>>
>>> Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI.
>>> MTK IOMMU[1] and MTK SMI[2] have not yet been merged, but we wanted to start discussion about the driver
>>> earlier so it could be merged sooner.
>>>
>>> [1]https://patchwork.kernel.org/patch/8335461/
>>> [2]https://patchwork.kernel.org/patch/7596181/
>>
>> <snip>
>>
>>> v4l2-compliance test output:
>>> localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1
>>> Driver Info:
>>> Driver name : mtk-vcodec-enc
>>> Card type : platform:mt8173
>>> Bus info : platform:mt8173
>>> Driver version: 4.4.0
>>> Capabilities : 0x84204000
>>> Video Memory-to-Memory Multiplanar
>>> Streaming
>>> Extended Pix Format
>>> Device Capabilities
>>> Device Caps : 0x04204000
>>> Video Memory-to-Memory Multiplanar
>>> Streaming
>>> Extended Pix Format
>>>
>>> Compliance test for device /dev/video1 (not using libv4l2):
>>>
>>> Required ioctls:
>>> test VIDIOC_QUERYCAP: OK
>>>
>>> Allow for multiple opens:
>>> test second video open: OK
>>> test VIDIOC_QUERYCAP: OK
>>> test VIDIOC_G/S_PRIORITY: OK
>>>
>>> Debug ioctls:
>>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>> test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>
>>> Input ioctls:
>>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>> Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>
>>> Output ioctls:
>>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>> Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>
>>> Input/Output configuration ioctls:
>>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>> test VIDIOC_G/S_EDID: OK (Not Supported)
>>>
>>> Control ioctls:
>>> test VIDIOC_QUERYCTRL/MENU: OK
>>> test VIDIOC_G/S_CTRL: OK
>>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>> Standard Controls: 12 Private Controls: 0
>>>
>>> Format ioctls:
>>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>> test VIDIOC_G/S_PARM: OK
>>> test VIDIOC_G_FBUF: OK (Not Supported)
>>> test VIDIOC_G_FMT: OK
>>> test VIDIOC_TRY_FMT: OK
>>> test VIDIOC_S_FMT: OK
>>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>
>>> Codec ioctls:
>>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>
>>> Buffer ioctls:
>>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>> test VIDIOC_EXPBUF: OK
>>>
>>> Total: 38, Succeeded: 38, Failed: 0, Warnings: 0
>>
>> Nice!
>>
>> Can you try 'v4l2-compliance -s'? Note that this may not work since I know
>> that v4l2-compliance doesn't work all that well with codecs, but I am
>> curious what the output is when you try streaming.
>>
>> Don't bother trying to chase down reported failures, those are likely from
>> v4l2-compliance itself. It is something I would like to improve, but -ENOTIME.
>>
>
> When I try to run 'v4l2-compliance -d /dev/video1 -s, I got follow
> output.
> I use v4.4-rc5 kernel and v4l-utils 1.6 version.
Can you compile v4l2-compliance straight from the v4l-utils.git master branch?
Version 1.6 is too old, and for proper compliance testing you should always use
the master branch. It probably won't matter for this -s test, but for the
regular test (without -s) it does make a difference.
If nothing else, using the master branch will make it easier for me to match up
the line numbers that v4l2-compliance reports to the actual source.
Thanks!
Hans
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(332): buf.querybuf(node, i) fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(868): testQueryBuf(node, cur_fmt.type, q.g_buffers())
> test MMAP: FAIL
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(923): ret && ret != ENOTTY
>
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(988): setupUserPtr(node, q)
> test USERPTR: FAIL
> test DMABUF: Cannot test, specify --expbuf-device
>
> best regards,
> Tiffany
>
>> Regards,
>>
>> Hans
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the Linux-mediatek
mailing list