[PATCH v4 5/8] [Media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver

[tiffany lin]

Hi Hans,

On Sat, 2016-02-20 at 10:18 +0100, Hans Verkuil wrote:
> On 02/20/2016 10:11 AM, tiffany lin wrote:
> > Hi Hans,
> > 
> > On Tue, 2016-02-16 at 08:44 +0100, Hans Verkuil wrote:
> >> On 02/16/2016 07:37 AM, tiffany lin wrote:
> >>>>> +
> >>>>> +const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
> >>>>> +	.vidioc_streamon		= v4l2_m2m_ioctl_streamon,
> >>>>> +	.vidioc_streamoff		= v4l2_m2m_ioctl_streamoff,
> >>>>> +
> >>>>> +	.vidioc_reqbufs			= v4l2_m2m_ioctl_reqbufs,
> >>>>> +	.vidioc_querybuf		= v4l2_m2m_ioctl_querybuf,
> >>>>> +	.vidioc_qbuf			= vidioc_venc_qbuf,
> >>>>> +	.vidioc_dqbuf			= vidioc_venc_dqbuf,
> >>>>> +
> >>>>> +	.vidioc_querycap		= vidioc_venc_querycap,
> >>>>> +	.vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap_mplane,
> >>>>> +	.vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out_mplane,
> >>>>> +	.vidioc_enum_framesizes		= vidioc_enum_framesizes,
> >>>>> +
> >>>>> +	.vidioc_try_fmt_vid_cap_mplane	= vidioc_try_fmt_vid_cap_mplane,
> >>>>> +	.vidioc_try_fmt_vid_out_mplane	= vidioc_try_fmt_vid_out_mplane,
> >>>>> +	.vidioc_expbuf			= v4l2_m2m_ioctl_expbuf,
> >>>>
> >>>> Please add vidioc_create_bufs and vidioc_prepare_buf as well.
> >>>>
> >>>
> >>> Currently we do not support these use cases, do we need to add
> >>> vidioc_create_bufs and vidioc_prepare_buf now?
> >>
> >> I would suggest you do. The vb2 framework gives it (almost) for free.
> >> prepare_buf is completely free (just add the helper) and create_bufs
> >> needs a few small changes in the queue_setup function, that's all.
> >>
> > After try to add vidioc_create_bufs directly using
> > vb2_ioctl_create_bufs, it will have problem in 
> 
> This is a m2m device, so you should use the m2m variant of this:
> v4l2_m2m_ioctl_create_bufs
> 
> That should solve this problem.
> 
> Ditto for prepare_buf: you need to use v4l2_m2m_ioctl_prepare_buf.
> 
Got it. After using v4l2_m2m_ioctl_create_bufs, the problem was solved.
Thanks for your help.

> Regards,
> 
> 	Hans