[PATCH V3 2/4] mfd: mt6397: int_con and int_status may vary in location
Lee Jones
lee.jones at linaro.org
Wed Feb 10 08:59:07 PST 2016
On Wed, 27 Jan 2016, John Crispin wrote:
> MT6323 has the INT_CON and INT_STATUS located at a different position.
> Make the registers locations configurable.
>
> Signed-off-by: John Crispin <blogic at openwrt.org>
> ---
> drivers/mfd/mt6397-core.c | 27 +++++++++++++++++----------
> include/linux/mfd/mt6397/core.h | 2 ++
> 2 files changed, 19 insertions(+), 10 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> index 1749c1c..75ad0fe 100644
> --- a/drivers/mfd/mt6397-core.c
> +++ b/drivers/mfd/mt6397-core.c
> @@ -69,8 +69,10 @@ static void mt6397_irq_sync_unlock(struct irq_data *data)
> {
> struct mt6397_chip *mt6397 = irq_data_get_irq_chip_data(data);
>
> - regmap_write(mt6397->regmap, MT6397_INT_CON0, mt6397->irq_masks_cur[0]);
> - regmap_write(mt6397->regmap, MT6397_INT_CON1, mt6397->irq_masks_cur[1]);
> + regmap_write(mt6397->regmap, mt6397->int_con[0],
> + mt6397->irq_masks_cur[0]);
> + regmap_write(mt6397->regmap, mt6397->int_con[1],
> + mt6397->irq_masks_cur[1]);
>
> mutex_unlock(&mt6397->irqlock);
> }
> @@ -147,8 +149,8 @@ static irqreturn_t mt6397_irq_thread(int irq, void *data)
> {
> struct mt6397_chip *mt6397 = data;
>
> - mt6397_irq_handle_reg(mt6397, MT6397_INT_STATUS0, 0);
> - mt6397_irq_handle_reg(mt6397, MT6397_INT_STATUS1, 16);
> + mt6397_irq_handle_reg(mt6397, mt6397->int_status[0], 0);
> + mt6397_irq_handle_reg(mt6397, mt6397->int_status[1], 16);
>
> return IRQ_HANDLED;
> }
> @@ -177,8 +179,8 @@ static int mt6397_irq_init(struct mt6397_chip *mt6397)
> mutex_init(&mt6397->irqlock);
>
> /* Mask all interrupt sources */
> - regmap_write(mt6397->regmap, MT6397_INT_CON0, 0x0);
> - regmap_write(mt6397->regmap, MT6397_INT_CON1, 0x0);
> + regmap_write(mt6397->regmap, mt6397->int_con[0], 0x0);
> + regmap_write(mt6397->regmap, mt6397->int_con[1], 0x0);
>
> mt6397->irq_domain = irq_domain_add_linear(mt6397->dev->of_node,
> MT6397_IRQ_NR, &mt6397_irq_domain_ops, mt6397);
> @@ -203,8 +205,8 @@ static int mt6397_irq_suspend(struct device *dev)
> {
> struct mt6397_chip *chip = dev_get_drvdata(dev);
>
> - regmap_write(chip->regmap, MT6397_INT_CON0, chip->wake_mask[0]);
> - regmap_write(chip->regmap, MT6397_INT_CON1, chip->wake_mask[1]);
> + regmap_write(chip->regmap, chip->int_con[0], chip->wake_mask[0]);
> + regmap_write(chip->regmap, chip->int_con[1], chip->wake_mask[1]);
>
> enable_irq_wake(chip->irq);
>
> @@ -215,8 +217,8 @@ static int mt6397_irq_resume(struct device *dev)
> {
> struct mt6397_chip *chip = dev_get_drvdata(dev);
>
> - regmap_write(chip->regmap, MT6397_INT_CON0, chip->irq_masks_cur[0]);
> - regmap_write(chip->regmap, MT6397_INT_CON1, chip->irq_masks_cur[1]);
> + regmap_write(chip->regmap, chip->int_con[0], chip->irq_masks_cur[0]);
> + regmap_write(chip->regmap, chip->int_con[1], chip->irq_masks_cur[1]);
>
> disable_irq_wake(chip->irq);
>
> @@ -237,6 +239,11 @@ static int mt6397_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> mt6397->dev = &pdev->dev;
> + mt6397->int_con[0] = MT6397_INT_CON0;
> + mt6397->int_con[1] = MT6397_INT_CON1;
> + mt6397->int_status[0] = MT6397_INT_STATUS0;
> + mt6397->int_status[1] = MT6397_INT_STATUS1;
> +
> /*
> * mt6397 MFD is child device of soc pmic wrapper.
> * Regmap is set from its parent.
> diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
> index 45b8e8a..d678f52 100644
> --- a/include/linux/mfd/mt6397/core.h
> +++ b/include/linux/mfd/mt6397/core.h
> @@ -60,6 +60,8 @@ struct mt6397_chip {
> u16 wake_mask[2];
> u16 irq_masks_cur[2];
> u16 irq_masks_cache[2];
> + u16 int_con[2];
> + u16 int_status[2];
> };
>
> #endif /* __MFD_MT6397_CORE_H__ */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the Linux-mediatek
mailing list