[PATCH net v3 1/9] net: ethernet: mediatek: fix fails from TX housekeeping due to incorrect port setup

sean.wang at mediatek.com sean.wang at mediatek.com
Mon Aug 29 19:59:17 PDT 2016


From: Sean Wang <sean.wang at mediatek.com>

which net device the SKB is complete for depends on the forward port
on txd4 on the corresponding TX descriptor, but the information isn't
set up well in case of  SKB fragments that would lead to watchdog timeout
from the upper layer, so fix it up.

Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Acked-by: John Crispin <john at phrozen.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 1801fd8..6e4a6ca 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -587,14 +587,15 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 	dma_addr_t mapped_addr;
 	unsigned int nr_frags;
 	int i, n_desc = 1;
-	u32 txd4 = 0;
+	u32 txd4 = 0, fport;
 
 	itxd = ring->next_free;
 	if (itxd == ring->last_free)
 		return -ENOMEM;
 
 	/* set the forward port */
-	txd4 |= (mac->id + 1) << TX_DMA_FPORT_SHIFT;
+	fport = (mac->id + 1) << TX_DMA_FPORT_SHIFT;
+	txd4 |= fport;
 
 	tx_buf = mtk_desc_to_tx_buf(ring, itxd);
 	memset(tx_buf, 0, sizeof(*tx_buf));
@@ -652,7 +653,7 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev,
 			WRITE_ONCE(txd->txd3, (TX_DMA_SWC |
 					       TX_DMA_PLEN0(frag_map_size) |
 					       last_frag * TX_DMA_LS0));
-			WRITE_ONCE(txd->txd4, 0);
+			WRITE_ONCE(txd->txd4, fport);
 
 			tx_buf->skb = (struct sk_buff *)MTK_DMA_DUMMY_DESC;
 			tx_buf = mtk_desc_to_tx_buf(ring, txd);
-- 
1.9.1




More information about the Linux-mediatek mailing list