[PATCH net v2 6/9] net: ethernet: mediatek: fix issue of driver removal with interface is up

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang at mediatek.com>

mtk_stop() must be called to stop for freeing DMA
resources acquired and restoring state changed by mtk_open()
firstly when module removal.

Signed-off-by: Sean Wang <sean.wang at mediatek.com>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 17dd2f8..1001317 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1903,6 +1903,14 @@ err_free_dev:
 static int mtk_remove(struct platform_device *pdev)
 {
 	struct mtk_eth *eth = platform_get_drvdata(pdev);
+	int i;
+
+	/* stop all devices to make sure that dma is properly shut down */
+	for (i = 0; i < MTK_MAC_COUNT; i++) {
+		if (!eth->netdev[i])
+			continue;
+		mtk_stop(eth->netdev[i]);
+	}
 
 	clk_disable_unprepare(eth->clks[MTK_CLK_GP1]);
 	clk_disable_unprepare(eth->clks[MTK_CLK_GP2]);
-- 
1.9.1