[PATCH v12 1/4] clk: mediatek: Add MT2701 clock support
James Liao
jamesjj.liao at mediatek.com
Fri Aug 26 21:16:17 PDT 2016
Hi Stephen,
On Wed, 2016-08-24 at 10:49 -0700, Stephen Boyd wrote:
> On 08/22, Erin Lo wrote:
> > +
> > +static void __init mtk_infrasys_init_early(struct device_node *node)
> > +{
> > + int r, i;
> > +
> > + if (!infra_clk_data) {
> > + infra_clk_data = mtk_alloc_clk_data(CLK_INFRA_NR);
> > +
> > + for (i = 0; i < CLK_INFRA_NR; i++)
> > + infra_clk_data->clks[i] = ERR_PTR(-EPROBE_DEFER);
> > + }
> > +
> > + mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
> > + infra_clk_data);
> > +
> > + r = of_clk_add_provider(node, of_clk_src_onecell_get, infra_clk_data);
> > + if (r)
> > + pr_err("%s(): could not register clock provider: %d\n",
> > + __func__, r);
> > +}
> > +CLK_OF_DECLARE(mtk_infra, "mediatek,mt2701-infracfg", mtk_infrasys_init_early);
>
> This should use CLK_OF_DECLARE_DRIVER? Has this been tested on
> latest clk-next? Some recent patches make it so that
> CLK_OF_DECLARE() prevents platform devices from being created for
> the associated DT nodes that match during of_clk_init().
Oops, you are right. Clocks in infra_clks are gone on clk-next, but they
are good on v4.8-rc1.
I register clk13m in infra_fixed_divs through CLK_OF_DECLARE() so that
it can be registered as early as possible because it will be referred by
the timer driver. Is there a formal way to separate clock registrations
on the same clock provider? Or should I move infra_clks registration
into CLK_OF_DECLARE()?
> > +
> > +static int mtk_infrasys_init(struct device_node *node)
> > +{
> > + int r, i;
> > +
> > + if (!infra_clk_data) {
> > + infra_clk_data = mtk_alloc_clk_data(CLK_INFRA_NR);
> > + } else {
> > + for (i = 0; i < CLK_INFRA_NR; i++) {
> > + if (infra_clk_data->clks[i] == ERR_PTR(-EPROBE_DEFER))
> > + infra_clk_data->clks[i] = ERR_PTR(-ENOENT);
> > + }
> > + }
> > +
> > + mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
> > + infra_clk_data);
> > + mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
> > + infra_clk_data);
> > +
> > + r = of_clk_add_provider(node, of_clk_src_onecell_get, infra_clk_data);
> > + if (r)
> > + pr_err("%s(): could not register clock provider: %d\n",
> > + __func__, r);
> > +
> > + return r;
> > +}
> > +
> > +static const struct mtk_gate_regs peri0_cg_regs = {
> > + .set_ofs = 0x0008,
> > + .clr_ofs = 0x0010,
> > + .sta_ofs = 0x0018,
> > +};
> > +
> > +static const struct mtk_gate_regs peri1_cg_regs = {
> > + .set_ofs = 0x000c,
> > + .clr_ofs = 0x0014,
> > + .sta_ofs = 0x001c,
> > +};
> > +
> > +#define GATE_PERI0(_id, _name, _parent, _shift) { \
> > + .id = _id, \
> > + .name = _name, \
> > + .parent_name = _parent, \
> > + .regs = &peri0_cg_regs, \
> > + .shift = _shift, \
> > + .ops = &mtk_clk_gate_ops_setclr, \
> > + }
> > +
> > +#define GATE_PERI1(_id, _name, _parent, _shift) { \
> > + .id = _id, \
> > + .name = _name, \
> > + .parent_name = _parent, \
> > + .regs = &peri1_cg_regs, \
> > + .shift = _shift, \
> > + .ops = &mtk_clk_gate_ops_setclr, \
> > + }
> > +
> > +static const struct mtk_gate peri_clks[] = {
> > + GATE_PERI1(CLK_PERI_USB0_MCU, "usb0_mcu_ck", "axi_sel", 31),
> > + GATE_PERI1(CLK_PERI_ETH, "eth_ck", "clk26m", 30),
> > + GATE_PERI1(CLK_PERI_SPI0, "spi0_ck", "spi0_sel", 29),
> > + GATE_PERI1(CLK_PERI_AUXADC, "auxadc_ck", "clk26m", 28),
> > + GATE_PERI0(CLK_PERI_I2C3, "i2c3_ck", "clk26m", 27),
> > + GATE_PERI0(CLK_PERI_I2C2, "i2c2_ck", "axi_sel", 26),
> > + GATE_PERI0(CLK_PERI_I2C1, "i2c1_ck", "axi_sel", 25),
> > + GATE_PERI0(CLK_PERI_I2C0, "i2c0_ck", "axi_sel", 24),
> > + GATE_PERI0(CLK_PERI_BTIF, "bitif_ck", "axi_sel", 23),
> > + GATE_PERI0(CLK_PERI_UART3, "uart3_ck", "axi_sel", 22),
> > + GATE_PERI0(CLK_PERI_UART2, "uart2_ck", "axi_sel", 21),
> > + GATE_PERI0(CLK_PERI_UART1, "uart1_ck", "axi_sel", 20),
> > + GATE_PERI0(CLK_PERI_UART0, "uart0_ck", "axi_sel", 19),
> > + GATE_PERI0(CLK_PERI_NLI, "nli_ck", "axi_sel", 18),
> > + GATE_PERI0(CLK_PERI_MSDC50_3, "msdc50_3_ck", "emmc_hclk_sel", 17),
> > + GATE_PERI0(CLK_PERI_MSDC30_3, "msdc30_3_ck", "msdc30_3_sel", 16),
> > + GATE_PERI0(CLK_PERI_MSDC30_2, "msdc30_2_ck", "msdc30_2_sel", 15),
> > + GATE_PERI0(CLK_PERI_MSDC30_1, "msdc30_1_ck", "msdc30_1_sel", 14),
> > + GATE_PERI0(CLK_PERI_MSDC30_0, "msdc30_0_ck", "msdc30_0_sel", 13),
> > + GATE_PERI0(CLK_PERI_AP_DMA, "ap_dma_ck", "axi_sel", 12),
> > + GATE_PERI0(CLK_PERI_USB1, "usb1_ck", "usb20_sel", 11),
> > + GATE_PERI0(CLK_PERI_USB0, "usb0_ck", "usb20_sel", 10),
> > + GATE_PERI0(CLK_PERI_PWM, "pwm_ck", "axi_sel", 9),
> > + GATE_PERI0(CLK_PERI_PWM7, "pwm7_ck", "axi_sel", 8),
> > + GATE_PERI0(CLK_PERI_PWM6, "pwm6_ck", "axi_sel", 7),
> > + GATE_PERI0(CLK_PERI_PWM5, "pwm5_ck", "axi_sel", 6),
> > + GATE_PERI0(CLK_PERI_PWM4, "pwm4_ck", "axi_sel", 5),
> > + GATE_PERI0(CLK_PERI_PWM3, "pwm3_ck", "axi_sel", 4),
> > + GATE_PERI0(CLK_PERI_PWM2, "pwm2_ck", "axi_sel", 3),
> > + GATE_PERI0(CLK_PERI_PWM1, "pwm1_ck", "axi_sel", 2),
> > + GATE_PERI0(CLK_PERI_THERM, "therm_ck", "axi_sel", 1),
> > + GATE_PERI0(CLK_PERI_NFI, "nfi_ck", "nfi2x_sel", 0),
> > +
> > + GATE_PERI1(CLK_PERI_FCI, "fci_ck", "ms_card_sel", 11),
> > + GATE_PERI1(CLK_PERI_SPI2, "spi2_ck", "spi2_sel", 10),
> > + GATE_PERI1(CLK_PERI_SPI1, "spi1_ck", "spi1_sel", 9),
> > + GATE_PERI1(CLK_PERI_HOST89_DVD, "host89_dvd_ck", "aud2dvd_sel", 8),
> > + GATE_PERI1(CLK_PERI_HOST89_SPI, "host89_spi_ck", "spi0_sel", 7),
> > + GATE_PERI1(CLK_PERI_HOST89_INT, "host89_int_ck", "axi_sel", 6),
> > + GATE_PERI1(CLK_PERI_FLASH, "flash_ck", "nfi2x_sel", 5),
> > + GATE_PERI1(CLK_PERI_NFI_PAD, "nfi_pad_ck", "nfi1x_pad", 4),
> > + GATE_PERI1(CLK_PERI_NFI_ECC, "nfi_ecc_ck", "nfi1x_pad", 3),
> > + GATE_PERI1(CLK_PERI_GCPU, "gcpu_ck", "axi_sel", 2),
> > + GATE_PERI1(CLK_PERI_USB_SLV, "usbslv_ck", "axi_sel", 1),
> > + GATE_PERI1(CLK_PERI_USB1_MCU, "usb1_mcu_ck", "axi_sel", 0),
> > +};
> > +
> > +static const char * const uart_ck_sel_parents[] = {
> > + "clk26m",
> > + "uart_sel",
> > +};
> > +
> > +static const struct mtk_composite peri_muxs[] = {
> > + MUX(CLK_PERI_UART0_SEL, "uart0_ck_sel", uart_ck_sel_parents,
> > + 0x40c, 0, 1),
> > + MUX(CLK_PERI_UART1_SEL, "uart1_ck_sel", uart_ck_sel_parents,
> > + 0x40c, 1, 1),
> > + MUX(CLK_PERI_UART2_SEL, "uart2_ck_sel", uart_ck_sel_parents,
> > + 0x40c, 2, 1),
> > + MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents,
> > + 0x40c, 3, 1),
> > +};
> > +
> > +static int mtk_pericfg_init(struct device_node *node)
> > +{
> > + struct clk_onecell_data *clk_data;
> > + void __iomem *base;
> > + int r;
> > +
> > + base = of_iomap(node, 0);
> > + if (!base) {
> > + pr_err("%s(): ioremap failed\n", __func__);
>
> Please pass the device structure to these callbacks so that we
> can use standard devm_ioremap() type APIs like normal platform
> drivers.
I'll change it in next series.
> > + return -ENOMEM;
> > + }
> > +
> > + clk_data = mtk_alloc_clk_data(CLK_PERI_NR);
> > +
> > + mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
> > + clk_data);
> > +
> > + mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base,
> > + &lock, clk_data);
> > +
> > + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
> > + if (r)
> > + pr_err("%s(): could not register clock provider: %d\n",
> > + __func__, r);
> > +
> > + return r;
> > +}
> > +
> > +#define MT8590_PLL_FMAX (2000 * MHZ)
> > +#define CON0_MT8590_RST_BAR BIT(27)
> > +
> > +#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, \
> > + _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) { \
> > + .id = _id, \
> > + .name = _name, \
> > + .reg = _reg, \
> > + .pwr_reg = _pwr_reg, \
> > + .en_mask = _en_mask, \
> > + .flags = _flags, \
> > + .rst_bar_mask = CON0_MT8590_RST_BAR, \
> > + .fmax = MT8590_PLL_FMAX, \
> > + .pcwbits = _pcwbits, \
> > + .pd_reg = _pd_reg, \
> > + .pd_shift = _pd_shift, \
> > + .tuner_reg = _tuner_reg, \
> > + .pcw_reg = _pcw_reg, \
> > + .pcw_shift = _pcw_shift, \
> > + }
> > +
> > +static const struct mtk_pll_data apmixed_plls[] = {
> > + PLL(CLK_APMIXED_ARMPLL, "armpll", 0x200, 0x20c, 0x80000001,
> > + PLL_AO, 21, 0x204, 24, 0x0, 0x204, 0),
> > + PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x210, 0x21c, 0xf0000001,
> > + HAVE_RST_BAR, 21, 0x210, 4, 0x0, 0x214, 0),
> > + PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x220, 0x22c, 0xf3000001,
> > + HAVE_RST_BAR, 7, 0x220, 4, 0x0, 0x224, 14),
> > + PLL(CLK_APMIXED_MMPLL, "mmpll", 0x230, 0x23c, 0x00000001, 0,
> > + 21, 0x230, 4, 0x0, 0x234, 0),
> > + PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x240, 0x24c, 0x00000001, 0,
> > + 21, 0x240, 4, 0x0, 0x244, 0),
> > + PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x250, 0x25c, 0x00000001, 0,
> > + 21, 0x250, 4, 0x0, 0x254, 0),
> > + PLL(CLK_APMIXED_AUD1PLL, "aud1pll", 0x270, 0x27c, 0x00000001, 0,
> > + 31, 0x270, 4, 0x0, 0x274, 0),
> > + PLL(CLK_APMIXED_TRGPLL, "trgpll", 0x280, 0x28c, 0x00000001, 0,
> > + 31, 0x280, 4, 0x0, 0x284, 0),
> > + PLL(CLK_APMIXED_ETHPLL, "ethpll", 0x290, 0x29c, 0x00000001, 0,
> > + 31, 0x290, 4, 0x0, 0x294, 0),
> > + PLL(CLK_APMIXED_VDECPLL, "vdecpll", 0x2a0, 0x2ac, 0x00000001, 0,
> > + 31, 0x2a0, 4, 0x0, 0x2a4, 0),
> > + PLL(CLK_APMIXED_HADDS2PLL, "hadds2pll", 0x2b0, 0x2bc, 0x00000001, 0,
> > + 31, 0x2b0, 4, 0x0, 0x2b4, 0),
> > + PLL(CLK_APMIXED_AUD2PLL, "aud2pll", 0x2c0, 0x2cc, 0x00000001, 0,
> > + 31, 0x2c0, 4, 0x0, 0x2c4, 0),
> > + PLL(CLK_APMIXED_TVD2PLL, "tvd2pll", 0x2d0, 0x2dc, 0x00000001, 0,
> > + 21, 0x2d0, 4, 0x0, 0x2d4, 0),
> > +};
> > +
> > +static int mtk_apmixedsys_init(struct device_node *node)
> > +{
> > + struct clk_onecell_data *clk_data;
> > + int r;
> > +
> > + clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR);
> > + if (!clk_data)
> > + return -ENOMEM;
> > +
> > + mtk_clk_register_plls(node, apmixed_plls, ARRAY_SIZE(apmixed_plls),
> > + clk_data);
> > +
> > + r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
> > + if (r)
> > + pr_err("%s(): could not register clock provider: %d\n",
> > + __func__, r);
>
> These three lines could be moved to the caller so taht we don't
> duplicate the same logic over and over.
I'll change it in next series.
> > +
> > + return r;
> > +}
> > +
> > +static const struct of_device_id of_match_clk_mt2701[] = {
> > + {
> > + .compatible = "mediatek,mt2701-topckgen",
> > + .data = mtk_topckgen_init,
> > + }, {
> > + .compatible = "mediatek,mt2701-infracfg",
> > + .data = mtk_infrasys_init,
> > + }, {
> > + .compatible = "mediatek,mt2701-pericfg",
> > + .data = mtk_pericfg_init,
> > + }, {
> > + .compatible = "mediatek,mt2701-apmixedsys",
> > + .data = mtk_apmixedsys_init,
> > + }, {
> > + /* sentinel */
> > + }
> > +};
> > +
> > +static int clk_mt2701_probe(struct platform_device *pdev)
> > +{
> > + int (*clk_init)(struct device_node *);
> > + const struct of_device_id *of_id;
> > +
> > + pr_warn("%s():%d: %s\n", __func__, __LINE__, pdev->name);
> > +
> > + of_id = of_match_node(of_match_clk_mt2701, pdev->dev.of_node);
> > + if (!of_id || !of_id->data)
> > + return -EINVAL;
>
> This can be
>
> clk_init = of_device_get_match_data(of_match_clk_mt2701, &pdev->dev);
> if (!clk_init)
> return -EINVAL;
Thanks. I'll change it in next series.
> > +
> > + clk_init = of_id->data;
> > + return clk_init(pdev->dev.of_node);
> > +}
> > +
> > +static struct platform_driver clk_mt2701_drv = {
> > + .probe = clk_mt2701_probe,
> > + .driver = {
> > + .name = "clk-mt2701",
> > + .owner = THIS_MODULE,
> > + .of_match_table = of_match_clk_mt2701,
> > + },
> > +};
> > +
> > +static int __init clk_mt2701_init(void)
> > +{
> > + return platform_driver_register(&clk_mt2701_drv);
> > +}
> > +
> > +arch_initcall(clk_mt2701_init);
> > diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
> > index bb30f70..6a015a8 100644
> > --- a/drivers/clk/mediatek/clk-mtk.c
> > +++ b/drivers/clk/mediatek/clk-mtk.c
> > @@ -58,6 +58,9 @@ void mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks,
> > for (i = 0; i < num; i++) {
> > const struct mtk_fixed_clk *rc = &clks[i];
> >
> > + if (!IS_ERR_OR_NULL(clk_data->clks[rc->id]))
> > + continue;
> > +
> > clk = clk_register_fixed_rate(NULL, rc->name, rc->parent, 0,
> > rc->rate);
> >
> > @@ -81,6 +84,9 @@ void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
> > for (i = 0; i < num; i++) {
> > const struct mtk_fixed_factor *ff = &clks[i];
> >
> > + if (!IS_ERR_OR_NULL(clk_data->clks[ff->id]))
> > + continue;
> > +
> > clk = clk_register_fixed_factor(NULL, ff->name, ff->parent_name,
> > CLK_SET_RATE_PARENT, ff->mult, ff->div);
> >
> > @@ -116,6 +122,9 @@ int mtk_clk_register_gates(struct device_node *node,
> > for (i = 0; i < num; i++) {
> > const struct mtk_gate *gate = &clks[i];
> >
> > + if (!IS_ERR_OR_NULL(clk_data->clks[gate->id]))
> > + continue;
> > +
> > clk = mtk_clk_register_gate(gate->name, gate->parent_name,
> > regmap,
> > gate->regs->set_ofs,
> > @@ -232,6 +241,9 @@ void mtk_clk_register_composites(const struct mtk_composite *mcs,
> > for (i = 0; i < num; i++) {
> > const struct mtk_composite *mc = &mcs[i];
> >
> > + if (!IS_ERR_OR_NULL(clk_data->clks[mc->id]))
> > + continue;
> > +
> > clk = mtk_clk_register_composite(mc, base, lock);
> >
> > if (IS_ERR(clk)) {
> > @@ -244,3 +256,31 @@ void mtk_clk_register_composites(const struct mtk_composite *mcs,
> > clk_data->clks[mc->id] = clk;
> > }
> > }
> > +
> > +void mtk_clk_register_dividers(const struct mtk_clk_divider *mcds,
> > + int num, void __iomem *base, spinlock_t *lock,
> > + struct clk_onecell_data *clk_data)
> > +{
> > + struct clk *clk;
> > + int i;
> > +
> > + for (i = 0; i < num; i++) {
> > + const struct mtk_clk_divider *mcd = &mcds[i];
> > +
> > + if (!IS_ERR_OR_NULL(clk_data->clks[mcd->id]))
>
> This dereferences clk_data...
>
> > + continue;
> > +
> > + clk = clk_register_divider(NULL, mcd->name, mcd->parent_name,
> > + mcd->flags, base + mcd->div_reg, mcd->div_shift,
> > + mcd->div_width, mcd->clk_divider_flags, lock);
> > +
> > + if (IS_ERR(clk)) {
> > + pr_err("Failed to register clk %s: %ld\n",
> > + mcd->name, PTR_ERR(clk));
> > + continue;
> > + }
> > +
> > + if (clk_data)
>
> And then we check it for NULL here? That doesn't make any sense.
I'll change it in next series.
> > + clk_data->clks[mcd->id] = clk;
> > + }
> > +}
Thanks for your comments.
Best regards,
James
More information about the Linux-mediatek
mailing list