[PATCH v3 1/2] mfd: mt6397: irq domain should initialize before mfd_add_devices()

[Lee Jones]

On Fri, 15 Apr 2016, Henry Chen wrote:

> Some sub driver like RTC module need irq domain from parent to create
> irq mapping when driver initialize. so move mt6397_irq_init() before
> mfd_add_devices().
> 
> Acked-by: John Crispin <blogic at openwrt.org>
> Signed-off-by: Henry Chen <henryc.chen at mediatek.com>
> ---
> This series fixed the below warning based on "Linux kernel v4.6-rc1"
> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471
> irq_create_mapping+0xc4/0xd0
>  
> Changes in V2: Add two patch for error handle checking.
> Changes in V3: Add interrupt as required properties to dt-bindings doc
> ---
>  drivers/mfd/mt6397-core.c | 22 +++++++++++++---------
>  1 file changed, 13 insertions(+), 9 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> index 8e8d932..b2faf56 100644
> --- a/drivers/mfd/mt6397-core.c
> +++ b/drivers/mfd/mt6397-core.c
> @@ -267,15 +267,23 @@ static int mt6397_probe(struct platform_device *pdev)
>  	ret = regmap_read(pmic->regmap, MT6397_CID, &id);
>  	if (ret) {
>  		dev_err(pmic->dev, "Failed to read chip id: %d\n", ret);
> -		goto fail_irq;
> +		return ret;
>  	}
>  
> +	pmic->irq = platform_get_irq(pdev, 0);
> +	if (pmic->irq <= 0)
> +		return pmic->irq;
> +
>  	switch (id & 0xff) {
>  	case MT6323_CID_CODE:
>  		pmic->int_con[0] = MT6323_INT_CON0;
>  		pmic->int_con[1] = MT6323_INT_CON1;
>  		pmic->int_status[0] = MT6323_INT_STATUS0;
>  		pmic->int_status[1] = MT6323_INT_STATUS1;
> +		ret = mt6397_irq_init(pmic);
> +		if (ret)
> +			return ret;
> +
>  		ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs,
>  				ARRAY_SIZE(mt6323_devs), NULL, 0, NULL);
>  		break;
> @@ -286,6 +294,10 @@ static int mt6397_probe(struct platform_device *pdev)
>  		pmic->int_con[1] = MT6397_INT_CON1;
>  		pmic->int_status[0] = MT6397_INT_STATUS0;
>  		pmic->int_status[1] = MT6397_INT_STATUS1;
> +		ret = mt6397_irq_init(pmic);
> +		if (ret)
> +			return ret;
> +
>  		ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
>  				ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
>  		break;
> @@ -296,14 +308,6 @@ static int mt6397_probe(struct platform_device *pdev)
>  		break;
>  	}
>  
> -	pmic->irq = platform_get_irq(pdev, 0);
> -	if (pmic->irq > 0) {
> -		ret = mt6397_irq_init(pmic);
> -		if (ret)
> -			return ret;
> -	}
> -
> -fail_irq:
>  	if (ret) {
>  		irq_domain_remove(pmic->irq_domain);
>  		dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog