[PATCH V2 7/8] net: mediatek: move the pending_work struct to the device generic struct
John Crispin
blogic at openwrt.org
Thu Apr 7 12:26:49 PDT 2016
The worker always touches both netdevs. It is ethernet core and not MAC
specific. We only need one worker, which belongs into the ethernets core
struct.
Signed-off-by: John Crispin <blogic at openwrt.org>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 10 ++++------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++--
2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8434355..f9f8851 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1193,7 +1193,7 @@ static void mtk_tx_timeout(struct net_device *dev)
eth->netdev[mac->id]->stats.tx_errors++;
netif_err(eth, tx_err, dev,
"transmit timed out\n");
- schedule_work(&mac->pending_work);
+ schedule_work(ð->pending_work);
}
static irqreturn_t mtk_handle_irq(int irq, void *_eth)
@@ -1438,7 +1438,7 @@ static void mtk_pending_work(struct work_struct *work)
/* stop all devices to make sure that dma is properly shut down */
for (i = 0; i < MTK_MAC_COUNT; i++) {
- if (!netif_oper_up(eth->netdev[i]))
+ if (!eth->netdev[i])
continue;
mtk_stop(eth->netdev[i]);
__set_bit(i, &restart);
@@ -1463,15 +1463,13 @@ static int mtk_cleanup(struct mtk_eth *eth)
int i;
for (i = 0; i < MTK_MAC_COUNT; i++) {
- struct mtk_mac *mac = netdev_priv(eth->netdev[i]);
-
if (!eth->netdev[i])
continue;
unregister_netdev(eth->netdev[i]);
free_netdev(eth->netdev[i]);
- cancel_work_sync(&mac->pending_work);
}
+ cancel_work_sync(ð->pending_work);
return 0;
}
@@ -1659,7 +1657,6 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
mac->id = id;
mac->hw = eth;
mac->of_node = np;
- INIT_WORK(&mac->pending_work, mtk_pending_work);
mac->hw_stats = devm_kzalloc(eth->dev,
sizeof(*mac->hw_stats),
@@ -1761,6 +1758,7 @@ static int mtk_probe(struct platform_device *pdev)
eth->dev = &pdev->dev;
eth->msg_enable = netif_msg_init(mtk_msg_level, MTK_DEFAULT_MSG_ENABLE);
+ INIT_WORK(ð->pending_work, mtk_pending_work);
err = mtk_hw_init(eth);
if (err)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 48a5292..eed626d 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -363,6 +363,7 @@ struct mtk_rx_ring {
* @clk_gp1: The gmac1 clock
* @clk_gp2: The gmac2 clock
* @mii_bus: If there is a bus we need to create an instance for it
+ * @pending_work: The workqueue used to reset the dma ring
*/
struct mtk_eth {
@@ -389,6 +390,7 @@ struct mtk_eth {
struct clk *clk_gp1;
struct clk *clk_gp2;
struct mii_bus *mii_bus;
+ struct work_struct pending_work;
};
/* struct mtk_mac - the structure that holds the info about the MACs of the
@@ -398,7 +400,6 @@ struct mtk_eth {
* @hw: Backpointer to our main datastruture
* @hw_stats: Packet statistics counter
* @phy_dev: The attached PHY if available
- * @pending_work: The workqueue used to reset the dma ring
*/
struct mtk_mac {
int id;
@@ -406,7 +407,6 @@ struct mtk_mac {
struct mtk_eth *hw;
struct mtk_hw_stats *hw_stats;
struct phy_device *phy_dev;
- struct work_struct pending_work;
};
/* the struct describing the SoC. these are declared in the soc_xyz.c files */
--
1.7.10.4
More information about the Linux-mediatek
mailing list