[PATCH] sbs-battery: fix power status when battery charging near dry
YH Huang
yh.huang at mediatek.com
Tue Apr 5 19:32:25 PDT 2016
POWER_SUPPLY_STATUS_NOT_CHARGING is used for AC connected, but
battery not charging (e.g. because battery temperature is out
of acceptable range).
When battery is charging near dry and BATTERY_FULL_DISCHARGED is set,
it is wrong to set as POWER_SUPPLY_STATUS_NOT_CHARGING.
Just use BATTERY_DISCHARGING to decide the power supply status is
discharging or charging.
Signed-off-by: YH Huang <yh.huang at mediatek.com>
---
drivers/power/sbs-battery.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c
index d6226d6..768b9fc 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/sbs-battery.c
@@ -382,8 +382,6 @@ static int sbs_get_battery_property(struct i2c_client *client,
if (ret & BATTERY_FULL_CHARGED)
val->intval = POWER_SUPPLY_STATUS_FULL;
- else if (ret & BATTERY_FULL_DISCHARGED)
- val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
else if (ret & BATTERY_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else
@@ -702,8 +700,6 @@ static void sbs_delayed_work(struct work_struct *work)
if (ret & BATTERY_FULL_CHARGED)
ret = POWER_SUPPLY_STATUS_FULL;
- else if (ret & BATTERY_FULL_DISCHARGED)
- ret = POWER_SUPPLY_STATUS_NOT_CHARGING;
else if (ret & BATTERY_DISCHARGING)
ret = POWER_SUPPLY_STATUS_DISCHARGING;
else
--
1.7.9.5
More information about the Linux-mediatek
mailing list