[PATCH] pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce
Yingjoe Chen
yingjoe.chen at mediatek.com
Fri Apr 1 07:34:42 PDT 2016
Daniel,
Thanks for your review.
On Fri, 2016-04-01 at 22:28 +0800, Daniel Kurtz wrote:
> Hi Yingjoe,
>
> On Fri, Apr 1, 2016 at 9:51 PM, Yingjoe Chen <yingjoe.chen at mediatek.com> wrote:
> > The debounce time unit for gpio_chip.set_debounce is us but
> > mtk_gpio_set_debounce regard it as ms.
> > Fix this by correct debounce time array dbnc_arr so it can find correct
> > debounce setting.
>
> This patch also changes the first entry to 500 usec. At least mention why.
>
OK. Will add this:
Debounce time for first debounce setting is 500us, correct this as well.
While I'm at it, also change the debounce time array name to
"debounce_time" for readability.
> >
> > Signed-off-by: Yingjoe Chen <yingjoe.chen at mediatek.com>
> > ---
> > drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> > index 2bbe6f7..be72325 100644
> > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> > @@ -1004,7 +1004,8 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset,
> > struct mtk_pinctrl *pctl = dev_get_drvdata(chip->parent);
> > int eint_num, virq, eint_offset;
> > unsigned int set_offset, bit, clr_bit, clr_offset, rst, i, unmask, dbnc;
> > - static const unsigned int dbnc_arr[] = {0 , 1, 16, 32, 64, 128, 256};
> > + static const unsigned int dbnc_arr[] = {500, 1000, 16000, 32000, 64000,
> > + 128000, 256000};
>
> While you are at it, can you please rename this to something more
> readable than "dbnc"?
Will change to debounce_time.
Joe.C
More information about the Linux-mediatek
mailing list