[PATCH 2/3] mtd: mtk-nor: mtk serial flash controller driver
bayi.cheng
bayi.cheng at mediatek.com
Tue Sep 15 09:23:14 PDT 2015
On Wed, 2015-09-09 at 08:37 +0200, Sascha Hauer wrote:
> On Tue, Sep 08, 2015 at 05:49:55PM +0800, Bayi Cheng wrote:
> > add spi nor flash driver for mediatek controller
> >
> > Signed-off-by: Bayi Cheng <bayi.cheng at mediatek.com>
> > ---
> > drivers/mtd/spi-nor/Kconfig | 7 +
> > drivers/mtd/spi-nor/Makefile | 1 +
> > drivers/mtd/spi-nor/mtk_nor.c | 533 ++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 541 insertions(+)
> > create mode 100644 drivers/mtd/spi-nor/mtk_nor.c
> >
> > diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
> > index 89bf4c1..f433890 100644
> > --- a/drivers/mtd/spi-nor/Kconfig
> > +++ b/drivers/mtd/spi-nor/Kconfig
> > @@ -7,6 +7,13 @@ menuconfig MTD_SPI_NOR
> >
> > if MTD_SPI_NOR
> >
> > +config MTD_MT81xx_NOR
> > + tristate "Support SPI flash Controller MTD_MT81xx_NOR"
> > + help
> > + This enables access to SPI Nor flash, using MTD_MT81XX_NOR controller.
> > + This controller does nor support generic SPI BUS, It only supports
> > + SPI NOR Flash.
> > +
> > config MTD_SPI_NOR_USE_4K_SECTORS
> > bool "Use small 4096 B erase sectors"
> > default y
> > diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> > index e53333e..2f4fe62 100644
> > --- a/drivers/mtd/spi-nor/Makefile
> > +++ b/drivers/mtd/spi-nor/Makefile
> > @@ -1,3 +1,4 @@
> > +obj-$(CONFIG_MTD_MT81xx_NOR) += mtk_nor.o
> > obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
> > obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
> > obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
> > diff --git a/drivers/mtd/spi-nor/mtk_nor.c b/drivers/mtd/spi-nor/mtk_nor.c
> > new file mode 100644
> > index 0000000..e675fb6
> > --- /dev/null
> > +++ b/drivers/mtd/spi-nor/mtk_nor.c
> > @@ -0,0 +1,533 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + * Author: Bayi.Cheng <bayi.cheng at mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/init.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/ioport.h>
> > +#include <linux/math64.h>
> > +#include <linux/module.h>
> > +#include <linux/mtd/mtd.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/pinctrl/consumer.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/mtd/mtd.h>
> > +#include <linux/mtd/partitions.h>
> > +#include <linux/mtd/spi-nor.h>
> > +
> > +#define MTK_NOR_CMD_REG 0x00
> > +#define MTK_NOR_CNT_REG 0x04
> > +#define MTK_NOR_RDSR_REG 0x08
> > +#define MTK_NOR_RDATA_REG 0x0c
> > +#define MTK_NOR_RADR0_REG 0x10
> > +#define MTK_NOR_RADR1_REG 0x14
> > +#define MTK_NOR_RADR2_REG 0x18
> > +#define MTK_NOR_WDATA_REG 0x1c
> > +#define MTK_NOR_PRGDATA0_REG 0x20
> > +#define MTK_NOR_PRGDATA1_REG 0x24
> > +#define MTK_NOR_PRGDATA2_REG 0x28
> > +#define MTK_NOR_PRGDATA3_REG 0x2c
> > +#define MTK_NOR_PRGDATA4_REG 0x30
> > +#define MTK_NOR_PRGDATA5_REG 0x34
> > +#define MTK_NOR_SHREG0_REG 0x38
> > +#define MTK_NOR_SHREG1_REG 0x3c
> > +#define MTK_NOR_SHREG2_REG 0x40
> > +#define MTK_NOR_SHREG3_REG 0x44
> > +#define MTK_NOR_SHREG4_REG 0x48
> > +#define MTK_NOR_SHREG5_REG 0x4c
> > +#define MTK_NOR_SHREG6_REG 0x50
> > +#define MTK_NOR_SHREG7_REG 0x54
> > +#define MTK_NOR_SHREG8_REG 0x58
> > +#define MTK_NOR_SHREG9_REG 0x5c
> > +#define MTK_NOR_FLHCFG_REG 0x84
> > +#define MTK_NOR_PP_DATA_REG 0x98
> > +#define MTK_NOR_PREBUF_STUS_REG 0x9c
> > +#define MTK_NOR_INTRSTUS_REG 0xa8
> > +#define MTK_NOR_INTREN_REG 0xac
> > +#define MTK_NOR_TIME_REG 0x94
> > +#define MTK_NOR_CHKSUM_CTL_REG 0xb8
> > +#define MTK_NOR_CHKSUM_REG 0xbc
> > +#define MTK_NOR_CMD2_REG 0xc0
> > +#define MTK_NOR_WRPROT_REG 0xc4
> > +#define MTK_NOR_RADR3_REG 0xc8
> > +#define MTK_NOR_DUAL_REG 0xcc
> > +#define MTK_NOR_DELSEL0_REG 0xa0
> > +#define MTK_NOR_DELSEL1_REG 0xa4
> > +#define MTK_NOR_DELSEL2_REG 0xd0
> > +#define MTK_NOR_DELSEL3_REG 0xd4
> > +#define MTK_NOR_DELSEL4_REG 0xd8
> > +#define MTK_NOR_CFG1_REG 0x60
> > +#define MTK_NOR_CFG2_REG 0x64
> > +#define MTK_NOR_CFG3_REG 0x68
> > +#define MTK_NOR_STATUS0_REG 0x70
> > +#define MTK_NOR_STATUS1_REG 0x74
> > +#define MTK_NOR_STATUS2_REG 0x78
> > +#define MTK_NOR_STATUS3_REG 0x7c
> > +/* commands for mtk nor controller */
> > +#define MTK_NOR_READ_CMD 0x0
> > +#define MTK_NOR_RDSR_CMD 0x2
> > +#define MTK_NOR_PRG_CMD 0x4
> > +#define MTK_NOR_WR_CMD 0x10
> > +#define MTK_NOR_WRSR_CMD 0x20
> > +#define MTK_NOR_PIO_READ_CMD 0x81
> > +#define MTK_NOR_WR_BUF_ENABLE 0x1
> > +#define MTK_NOR_WR_BUF_DISABLE 0x0
> > +#define MTK_NOR_ENABLE_SF_CMD 0x30
> > +#define MTK_NOR_DUAD_ADDR_EN 0x8
> > +#define MTK_NOR_QUAD_READ_EN 0x4
> > +#define MTK_NOR_DUAL_ADDR_EN 0x2
> > +#define MTK_NOR_DUAL_READ_EN 0x1
> > +#define MTK_NOR_DUAL_DISABLE 0x0
> > +#define MTK_NOR_FAST_READ 0x1
> > +
> > +#define SFLASH_WRBUF_SIZE 128
> > +#define MAX_FLASHCOUNT 1
> > +#define SFLASHHWNAME_LEN 12
> > +#define SFLASH_MAX_DMA_SIZE (1024 * 8)
> > +
> > +#define LoWord(d) ((u16)(d & 0x0000ffffL))
> > +#define HiWord(d) ((u16)((d >> 16) & 0x0000ffffL))
> > +#define LoByte(w) ((u8)(w & 0x00ff))
> > +#define HiByte(w) ((u8)(((w) >> 8) & 0x00ff))
>
> NoCamelCasePlease
OK, I will fix it. and sorry for later reply !
>
> > +#define LOCAL_BUF_SIZE (SFLASH_MAX_DMA_SIZE * 20)
> > +
> > +struct mt8173_nor {
> > + struct mtd_info mtd;
> > + struct spi_nor nor;
> > + struct device *dev;
> > + void __iomem *base; /* nor flash base address */
> > + struct clk *spi_clk;
> > + struct clk *src_axi_clk;
> > + struct clk *sf_mux_clk;
> > + struct clk *nor_clk;
> > +};
> > +
> > +static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor)
> > +{
> > + struct spi_nor *nor = &mt8173_nor->nor;
> > +
> > + switch (nor->flash_read) {
> > + case SPI_NOR_FAST:
> > + writeb(SPINOR_OP_READ_FAST, mt8173_nor->base +
> > + MTK_NOR_PRGDATA3_REG);
> > + writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
> > + MTK_NOR_CFG1_REG);
> > + break;
> > + case SPI_NOR_DUAL:
> > + writeb(SPINOR_OP_READ_1_1_2, mt8173_nor->base +
> > + MTK_NOR_PRGDATA3_REG);
> > + writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
> > + MTK_NOR_DUAL_REG);
> > + break;
> > + case SPI_NOR_QUAD:
> > + writeb(SPINOR_OP_READ_1_1_4, mt8173_nor->base +
> > + MTK_NOR_PRGDATA3_REG);
> > + writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
> > + MTK_NOR_DUAL_REG);
> > + break;
> > + default:
> > + writeb(SPINOR_OP_READ, mt8173_nor->base +
> > + MTK_NOR_PRGDATA3_REG);
> > + writeb(MTK_NOR_DUAL_DISABLE, mt8173_nor->base +
> > + MTK_NOR_DUAL_REG);
> > + break;
> > + }
> > +}
> > +
> > +static int mt8173_nor_polling_reg(struct mt8173_nor *mt8173_nor, int compare)
> > +{
> > + int reg, ret;
> > +
> > + ret = readl_poll_timeout(mt8173_nor->base + MTK_NOR_CMD_REG, reg,
> > + !(reg & compare), 100, 10000);
> > + if (ret)
> > + dev_err(mt8173_nor->dev, "compare val%02X timeout!\n", compare);
> > + return ret;
> > +}
> > +
> > +static int mt8173_nor_execute_cmd(struct mt8173_nor *mt8173_nor, u8 cmdval)
> > +{
> > + u8 val = cmdval & 0x1f;
> > +
> > + writeb(cmdval, mt8173_nor->base + MTK_NOR_CMD_REG);
> > + return mt8173_nor_polling_reg(mt8173_nor, val);
>
> mt8173_nor_polling_reg() is used only once here. You can inline the code
> here.
>
Ok, I will fixed it .
> > +}
> > +
> > +static int mt8173_nor_set_cmd(struct mt8173_nor *mt8173_nor, int addr,
> > + int len, int op)
> > +{
> > + writeb(op, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
> > + /* reset the following register */
>
> We see that some register writes follow, this comment doesn't contain
> any additional information.
I will added more comments here .
>
> > + writeb(LoByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA4_REG);
> > + writeb(HiByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA3_REG);
> > + writeb(LoByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA2_REG);
>
> Just do a:
>
> (addr >> 16) & 0xff
> (addr >> 8) & 0xff
> addr & 0xff
>
> It's a pattern every lowlevel programmer recognizes without thinking
> about it. Same for the other places where these defines are used.
Yes, Thanks for your remind!
>
> > + writeb(len, mt8173_nor->base + MTK_NOR_CNT_REG);
> > + return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PRG_CMD);
> > +}
> > +
> > +static int mt8173_nor_get_para(struct mt8173_nor *mt8173_nor, u8 *buf, int len)
> > +{
> > + if (len > 1) {
> > + /* read JEDEC ID need 4 bytes commands */
> > + mt8173_nor_set_cmd(mt8173_nor, 0, 32, SPINOR_OP_RDID);
> > + buf[2] = readb(mt8173_nor->base + MTK_NOR_SHREG0_REG);
> > + buf[1] = readb(mt8173_nor->base + MTK_NOR_SHREG1_REG);
> > + buf[0] = readb(mt8173_nor->base + MTK_NOR_SHREG2_REG);
> > + } else {
> > + if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_RDSR_CMD)) {
> > + dev_err(mt8173_nor->dev, "read status failed!\n");
> > + return -EINVAL;
> > + }
> > + *buf = readb(mt8173_nor->base + MTK_NOR_RDSR_REG);
> > + }
> > + return 0;
> > +}
> > +
> > +/* cmd1 sent to nor flash, cmd2 write to nor controller */
> > +static int mt8173_nor_set_para(struct mt8173_nor *mt8173_nor, int cmd1,
> > + int cmd2)
> > +{
> > + if (mt8173_nor_set_cmd(mt8173_nor, 0, 8, SPINOR_OP_WREN)) {
> > + dev_err(mt8173_nor->dev,
> > + "write enable failed in write protect!\n");
> > + return -EINVAL;
> > + }
> > + writeb(cmd1, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
> > + writeb(8, mt8173_nor->base + MTK_NOR_CNT_REG);
> > + if (mt8173_nor_execute_cmd(mt8173_nor, cmd2)) {
> > + dev_err(mt8173_nor->dev, "execute cmd failed!\n");
>
> mt8173_nor_execute_cmd() will already have printed an error message.
OK, I will remove this error message!
>
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +static int mt8173_nor_write_buffer_enable(struct mt8173_nor *mt8173_nor)
> > +{
> > + u8 reg, ret;
> > +
> > + writel(MTK_NOR_WR_BUF_ENABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
> > + ret = readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
> > + 0x01 == (reg & 0x01), 100, 10000);
> > + if (ret)
> > + dev_err(mt8173_nor->dev, "timeout!\n");
> > + return ret;
> > +}
> > +
> > +static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor)
> > +{
> > + u8 reg, ret;
> > +
> > + writel(MTK_NOR_WR_BUF_DISABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
> > + ret = readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
> > + MTK_NOR_WR_BUF_DISABLE == (reg & 0xf), 100,
> > + 10000);
> > + if (ret)
> > + dev_err(mt8173_nor->dev, "compare timeout!\n");
> > + return ret;
> > +}
> > +
> > +static int mt8173_nor_erase_sector(struct spi_nor *nor, loff_t offset)
> > +{
> > + struct mt8173_nor *mt8173_nor = nor->priv;
> > +
> > + if (mt8173_nor_set_cmd(mt8173_nor, 0, 8, SPINOR_OP_WREN)) {
> > + dev_err(mt8173_nor->dev,
> > + "write enable failed in erase sector!\n");
> > + return -EINVAL;
> > + }
> > +
> > + mt8173_nor_set_cmd(mt8173_nor, (int)offset, 32, SPINOR_OP_BE_4K);
> > + return 0;
> > +}
> > +
> > +static int mt8173_nor_read_hw(struct mt8173_nor *mt8173_nor, int addr, int len,
> > + int *retlen, u8 *buf)
> > +{
> > + int ret = 0, i;
> > +
> > + mt8173_nor_set_read_mode(mt8173_nor);
> > + writeb(HiByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_RADR3_REG);
> > + writeb(LoByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> > + writeb(HiByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> > + writeb(LoByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> > +
> > + for (i = 0; i < len; i++, (*retlen)++) {
> > + if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD)) {
> > + dev_err(mt8173_nor->dev, "read flash failed!\n");
> > + return -EINVAL;
> > + }
> > + buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG);
> > + }
> > + return ret;
>
> ret will always be 0 here, drop the ret variable.
OK, I will drop the ret variable!
>
> > +}
> > +
> > +static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t len,
> > + size_t *retlen, u_char *buf)
> > +{
> > + struct mt8173_nor *mt8173_nor = nor->priv;
> > +
> > + return mt8173_nor_read_hw(mt8173_nor, (int)from, (int)len,
> > + (int *)retlen, (u8 *)buf);
>
> mt8173_nor_read_hw is used only once here, no need for a separate
> function.
OK, I will remove the mt8173_nor_read_hw
>
> > +}
> > +
> > +static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor,
> > + int u4addr, u8 u1data)
> > +{
> > + if (u4addr >= mt8173_nor->mtd.size) {
> > + dev_err(mt8173_nor->dev, "invalid write address!\n");
> > + return -EINVAL;
> > + }
> > +
> > + writeb(u1data, mt8173_nor->base + MTK_NOR_WDATA_REG);
> > + writeb(LoByte(HiWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> > + writeb(HiByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> > + writeb(LoByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> > +
> > + if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD)) {
> > + dev_err(mt8173_nor->dev, "write byte offset%08x\n", u4addr);
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int u4addr,
> > + int u4len, const u8 *buf)
> > +{
> > + int i, j, bufidx, data;
> > +
> > + if (!buf)
> > + return -EINVAL;
> > +
> > + writeb(LoByte(HiWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> > + writeb(HiByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> > + writeb(LoByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> > +
> > + bufidx = 0;
> > + for (i = 0; i < u4len; i += 4) {
> > + for (j = 0; j < 4; j++) {
> > + (*((u8 *)&data + j)) = buf[bufidx];
> > + bufidx++;
> > + }
> > + writel(data, mt8173_nor->base + MTK_NOR_PP_DATA_REG);
> > + }
> > +
> > + if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD)) {
> > + dev_err(mt8173_nor->dev, "write buffer offset:%08x\n", u4addr);
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +static void mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len,
> > + size_t *retlen, const u_char *buf)
> > +{
> > + struct mt8173_nor *mt8173_nor = nor->priv;
> > + size_t i;
> > +
> > + if (nor->page_size == len) {
> > + if (mt8173_nor_write_buffer_enable(mt8173_nor))
> > + dev_err(mt8173_nor->dev, "write buffer enable failed !\n");
> > + while (len > 0) {
> > + mt8173_nor_write_buffer(mt8173_nor, to,
> > + SFLASH_WRBUF_SIZE, buf);
> > + len -= SFLASH_WRBUF_SIZE;
> > + to += SFLASH_WRBUF_SIZE;
> > + buf += SFLASH_WRBUF_SIZE;
> > + (*retlen) += SFLASH_WRBUF_SIZE;
> > + }
> > + if (mt8173_nor_write_buffer_disable(mt8173_nor))
> > + dev_err(mt8173_nor->dev, "write buffer disable failed !\n");
> > + } else {
> > + for (i = 0; i < len; i++, (*retlen)++) {
> > + if (mt8173_nor_write_single_byte(mt8173_nor, to, *buf))
> > + dev_err(mt8173_nor->dev, "write byte failed !\n");
> > + to++;
> > + buf++;
> > + }
> > + }
> > +}
>
> Instead of using the buffer write method only for page_size sized writes
> I would expect a behaviour of this function like:
>
> while (len > SFLASH_WRBUF_SIZE) {
> write_buffer();
> len -= SFLASH_WRBUF_SIZE;
> }
>
> while (len) {
> write_single_byte();
> len--;
> }
>
OK, I will use this method, Thanks for your instruct !
> > +
> > +static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
> > +{
> > + int ret = 0;
> > + struct mt8173_nor *mt8173_nor = nor->priv;
> > + /* mtk nor controller haven't supoort SPINOR_OP_RDCR */
> > + if (opcode == SPINOR_OP_RDID || opcode == SPINOR_OP_RDSR)
> > + ret = mt8173_nor_get_para(mt8173_nor, buf, len);
> > + else
> > + dev_warn(mt8173_nor->dev, "invalid cmd %d\n", opcode);
> > +
> > + return ret;
> > +}
> > +
> > +static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
> > + int len, int write_enable)
> > +{
> > + int ret, cmd_to_nor, cmd_to_controller;
> > + struct mt8173_nor *mt8173_nor = nor->priv;
> > +
> > + if (opcode == SPINOR_OP_WRSR || opcode == SPINOR_OP_CHIP_ERASE) {
> > + if (len > 0) {
> > + cmd_to_nor = *buf;
> > + cmd_to_controller = MTK_NOR_WRSR_CMD;
> > + } else {
> > + cmd_to_nor = opcode;
> > + cmd_to_controller = MTK_NOR_PRG_CMD;
> > + }
> > + ret = mt8173_nor_set_para(mt8173_nor, cmd_to_nor,
> > + cmd_to_controller);
> > + } else if (opcode == SPINOR_OP_WREN || opcode == SPINOR_OP_WRDI) {
> > + ret = mt8173_nor_set_cmd(mt8173_nor, 0, 8, opcode);
> > + } else {
> > + dev_warn(mt8173_nor->dev, "have not support cmd %d\n", opcode);
> > + ret = -EINVAL;
> > + }
> > + return ret;
> > +}
> > +
> > +static int __init mtk_nor_init(struct mt8173_nor *mt8173_nor,
> > + struct mtd_part_parser_data ppdata)
>
> Why a copy and not a pointer to struct mtd_part_parser_data?
You are right, it seems a pointer will be more suitable
>
> > +{
> > + int ret;
> > + struct spi_nor *nor;
> > + struct mtd_info *mtd;
> > +
> > + writel(MTK_NOR_ENABLE_SF_CMD, mt8173_nor->base + MTK_NOR_WRPROT_REG);
> > + nor = &mt8173_nor->nor;
> > + mtd = &mt8173_nor->mtd;
> > + nor->mtd = mt8173_nor->mtd;
> > + nor->dev = mt8173_nor->dev;
> > + nor->priv = mt8173_nor;
> > + mtd->priv = nor;
> > +
> > + /* fill the hooks to spi nor */
> > + nor->read = mt8173_nor_read;
> > + nor->read_reg = mt8173_nor_read_reg;
> > + nor->write = mt8173_nor_write;
> > + nor->write_reg = mt8173_nor_write_reg;
> > + nor->erase = mt8173_nor_erase_sector;
> > + nor->mtd.owner = THIS_MODULE;
> > + nor->mtd.name = "mtk_nor";
> > + /* initialized with NULL */
> > + ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL);
> > + if (ret) {
> > + dev_err(mt8173_nor->dev, "spi_nor_scan failed !\n");
> > + return -EINVAL;
>
> Just forward the error from spi_nor_scan.
Ok, I will fixed it !
>
> > + }
> > + dev_dbg(mt8173_nor->dev, "mtd->size :0x%llx!\n", mtd->size);
> > + ret = mtd_device_parse_register(&nor->mtd, NULL, &ppdata, NULL, 0);
> > +
> > + return ret;
> > +}
> > +
> > +static int mtk_nor_drv_probe(struct platform_device *pdev)
> > +{
> > + struct device_node *np = pdev->dev.of_node;
> > + struct mtd_part_parser_data ppdata;
> > + struct resource *res;
> > + int ret;
> > + struct mt8173_nor *mt8173_nor = devm_kzalloc(&pdev->dev,
> > + sizeof(*mt8173_nor), GFP_KERNEL);
> > +
> > + if (!pdev->dev.of_node) {
> > + dev_err(&pdev->dev, "No DT found\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (!mt8173_nor)
> > + return -ENOMEM;
> > + platform_set_drvdata(pdev, mt8173_nor);
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + mt8173_nor->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(mt8173_nor->base)) {
> > + ret = PTR_ERR(mt8173_nor->base);
> > + goto nor_free;
> > + }
> > +
> > + mt8173_nor->spi_clk = devm_clk_get(&pdev->dev, "spi_clk");
> > + if (IS_ERR(mt8173_nor->spi_clk)) {
> > + ret = PTR_ERR(mt8173_nor->spi_clk);
> > + goto nor_free;
> > + }
> > +
> > + mt8173_nor->src_axi_clk = devm_clk_get(&pdev->dev, "axi_clk");
> > + if (IS_ERR(mt8173_nor->src_axi_clk)) {
> > + ret = PTR_ERR(mt8173_nor->src_axi_clk);
> > + goto nor_free;
> > + }
> > +
> > + mt8173_nor->sf_mux_clk = devm_clk_get(&pdev->dev, "mux_clk");
> > + if (IS_ERR(mt8173_nor->sf_mux_clk)) {
> > + ret = PTR_ERR(mt8173_nor->sf_mux_clk);
> > + goto nor_free;
> > + }
> > +
> > + mt8173_nor->nor_clk = devm_clk_get(&pdev->dev, "sf_clk");
> > + if (IS_ERR(mt8173_nor->nor_clk)) {
> > + ret = PTR_ERR(mt8173_nor->nor_clk);
> > + goto nor_free;
> > + }
> > +
> > + mt8173_nor->dev = &pdev->dev;
> > + clk_prepare_enable(mt8173_nor->spi_clk);
> > + clk_prepare_enable(mt8173_nor->src_axi_clk);
> > + clk_prepare_enable(mt8173_nor->sf_mux_clk);
> > + clk_prepare_enable(mt8173_nor->nor_clk);
> > + clk_set_parent(mt8173_nor->nor_clk, mt8173_nor->sf_mux_clk);
>
> sf_mux_clk is inherently enabled when you enable one of its child
> clocks, like nor_clk in this case, so you don't have to enable it
> explicitly.
> Also putting knowledge of the SoCs clock layout into the driver is a bad
> idea. There is the assigned-clock-parents binding which you can use here
> for assigning the clock parent.
Ok. I will not to enable the parent clock here.
>
> > +
> > + ppdata.of_node = np;
> > + ret = mtk_nor_init(mt8173_nor, ppdata);
> > +
> > +nor_free:
> > + return ret;
> > +}
> > +
> > +static int mtk_nor_drv_remove(struct platform_device *pdev)
> > +{
> > + struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
> > +
> > + clk_disable_unprepare(mt8173_nor->spi_clk);
> > + clk_disable_unprepare(mt8173_nor->src_axi_clk);
> > + clk_disable_unprepare(mt8173_nor->sf_mux_clk);
> > + clk_disable_unprepare(mt8173_nor->nor_clk);
> > + mtd_device_unregister(&mt8173_nor->mtd);
>
> This order is wrong. You should not disable clocks on a device that
> might be active. You should unregister it first and disable the clocks
> afterwards.
OK , I will change the order, and Thanks for your instruct again !
>
> Sascha
>
>
More information about the Linux-mediatek
mailing list