[PATCH 2/3] mtd: mtk-nor: mtk serial flash controller driver

Sascha Hauer s.hauer at pengutronix.de
Tue Sep 8 23:37:01 PDT 2015


On Tue, Sep 08, 2015 at 05:49:55PM +0800, Bayi Cheng wrote:
> add spi nor flash driver for mediatek controller
> 
> Signed-off-by: Bayi Cheng <bayi.cheng at mediatek.com>
> ---
>  drivers/mtd/spi-nor/Kconfig   |   7 +
>  drivers/mtd/spi-nor/Makefile  |   1 +
>  drivers/mtd/spi-nor/mtk_nor.c | 533 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 541 insertions(+)
>  create mode 100644 drivers/mtd/spi-nor/mtk_nor.c
> 
> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
> index 89bf4c1..f433890 100644
> --- a/drivers/mtd/spi-nor/Kconfig
> +++ b/drivers/mtd/spi-nor/Kconfig
> @@ -7,6 +7,13 @@ menuconfig MTD_SPI_NOR
>  
>  if MTD_SPI_NOR
>  
> +config MTD_MT81xx_NOR
> +	tristate "Support SPI flash Controller MTD_MT81xx_NOR"
> +	help
> +	  This enables access to SPI Nor flash, using MTD_MT81XX_NOR controller.
> +	  This controller does nor support generic SPI BUS, It only supports
> +	  SPI NOR Flash.
> +
>  config MTD_SPI_NOR_USE_4K_SECTORS
>  	bool "Use small 4096 B erase sectors"
>  	default y
> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> index e53333e..2f4fe62 100644
> --- a/drivers/mtd/spi-nor/Makefile
> +++ b/drivers/mtd/spi-nor/Makefile
> @@ -1,3 +1,4 @@
> +obj-$(CONFIG_MTD_MT81xx_NOR)	+= mtk_nor.o
>  obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
>  obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
>  obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
> diff --git a/drivers/mtd/spi-nor/mtk_nor.c b/drivers/mtd/spi-nor/mtk_nor.c
> new file mode 100644
> index 0000000..e675fb6
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/mtk_nor.c
> @@ -0,0 +1,533 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Bayi.Cheng <bayi.cheng at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/ioport.h>
> +#include <linux/math64.h>
> +#include <linux/module.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/mtd/spi-nor.h>
> +
> +#define MTK_NOR_CMD_REG			0x00
> +#define MTK_NOR_CNT_REG			0x04
> +#define MTK_NOR_RDSR_REG		0x08
> +#define MTK_NOR_RDATA_REG		0x0c
> +#define MTK_NOR_RADR0_REG		0x10
> +#define MTK_NOR_RADR1_REG		0x14
> +#define MTK_NOR_RADR2_REG		0x18
> +#define MTK_NOR_WDATA_REG		0x1c
> +#define MTK_NOR_PRGDATA0_REG		0x20
> +#define MTK_NOR_PRGDATA1_REG		0x24
> +#define MTK_NOR_PRGDATA2_REG		0x28
> +#define MTK_NOR_PRGDATA3_REG		0x2c
> +#define MTK_NOR_PRGDATA4_REG		0x30
> +#define MTK_NOR_PRGDATA5_REG		0x34
> +#define MTK_NOR_SHREG0_REG		0x38
> +#define MTK_NOR_SHREG1_REG		0x3c
> +#define MTK_NOR_SHREG2_REG		0x40
> +#define MTK_NOR_SHREG3_REG		0x44
> +#define MTK_NOR_SHREG4_REG		0x48
> +#define MTK_NOR_SHREG5_REG		0x4c
> +#define MTK_NOR_SHREG6_REG		0x50
> +#define MTK_NOR_SHREG7_REG		0x54
> +#define MTK_NOR_SHREG8_REG		0x58
> +#define MTK_NOR_SHREG9_REG		0x5c
> +#define MTK_NOR_FLHCFG_REG		0x84
> +#define MTK_NOR_PP_DATA_REG		0x98
> +#define MTK_NOR_PREBUF_STUS_REG		0x9c
> +#define MTK_NOR_INTRSTUS_REG		0xa8
> +#define MTK_NOR_INTREN_REG		0xac
> +#define MTK_NOR_TIME_REG		0x94
> +#define MTK_NOR_CHKSUM_CTL_REG		0xb8
> +#define MTK_NOR_CHKSUM_REG		0xbc
> +#define MTK_NOR_CMD2_REG		0xc0
> +#define MTK_NOR_WRPROT_REG		0xc4
> +#define MTK_NOR_RADR3_REG		0xc8
> +#define MTK_NOR_DUAL_REG		0xcc
> +#define MTK_NOR_DELSEL0_REG		0xa0
> +#define MTK_NOR_DELSEL1_REG		0xa4
> +#define MTK_NOR_DELSEL2_REG		0xd0
> +#define MTK_NOR_DELSEL3_REG		0xd4
> +#define MTK_NOR_DELSEL4_REG		0xd8
> +#define MTK_NOR_CFG1_REG		0x60
> +#define MTK_NOR_CFG2_REG		0x64
> +#define MTK_NOR_CFG3_REG		0x68
> +#define MTK_NOR_STATUS0_REG		0x70
> +#define MTK_NOR_STATUS1_REG		0x74
> +#define MTK_NOR_STATUS2_REG		0x78
> +#define MTK_NOR_STATUS3_REG		0x7c
> +/* commands for mtk nor controller */
> +#define MTK_NOR_READ_CMD		0x0
> +#define MTK_NOR_RDSR_CMD		0x2
> +#define MTK_NOR_PRG_CMD			0x4
> +#define MTK_NOR_WR_CMD			0x10
> +#define MTK_NOR_WRSR_CMD		0x20
> +#define MTK_NOR_PIO_READ_CMD		0x81
> +#define MTK_NOR_WR_BUF_ENABLE		0x1
> +#define MTK_NOR_WR_BUF_DISABLE		0x0
> +#define MTK_NOR_ENABLE_SF_CMD		0x30
> +#define MTK_NOR_DUAD_ADDR_EN		0x8
> +#define MTK_NOR_QUAD_READ_EN		0x4
> +#define MTK_NOR_DUAL_ADDR_EN		0x2
> +#define MTK_NOR_DUAL_READ_EN		0x1
> +#define MTK_NOR_DUAL_DISABLE		0x0
> +#define MTK_NOR_FAST_READ		0x1
> +
> +#define SFLASH_WRBUF_SIZE		128
> +#define MAX_FLASHCOUNT			1
> +#define SFLASHHWNAME_LEN		12
> +#define SFLASH_MAX_DMA_SIZE		(1024 * 8)
> +
> +#define LoWord(d)		((u16)(d & 0x0000ffffL))
> +#define HiWord(d)		((u16)((d >> 16) & 0x0000ffffL))
> +#define LoByte(w)		((u8)(w & 0x00ff))
> +#define HiByte(w)		((u8)(((w) >> 8) & 0x00ff))

NoCamelCasePlease

> +#define LOCAL_BUF_SIZE		(SFLASH_MAX_DMA_SIZE * 20)
> +
> +struct mt8173_nor {
> +	struct mtd_info mtd;
> +	struct spi_nor nor;
> +	struct device *dev;
> +	void __iomem *base;	/* nor flash base address */
> +	struct clk *spi_clk;
> +	struct clk *src_axi_clk;
> +	struct clk *sf_mux_clk;
> +	struct clk *nor_clk;
> +};
> +
> +static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor)
> +{
> +	struct spi_nor *nor = &mt8173_nor->nor;
> +
> +	switch (nor->flash_read) {
> +	case SPI_NOR_FAST:
> +		writeb(SPINOR_OP_READ_FAST, mt8173_nor->base +
> +		       MTK_NOR_PRGDATA3_REG);
> +		writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
> +		       MTK_NOR_CFG1_REG);
> +		break;
> +	case SPI_NOR_DUAL:
> +		writeb(SPINOR_OP_READ_1_1_2, mt8173_nor->base +
> +		       MTK_NOR_PRGDATA3_REG);
> +		writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
> +		       MTK_NOR_DUAL_REG);
> +		break;
> +	case SPI_NOR_QUAD:
> +		writeb(SPINOR_OP_READ_1_1_4, mt8173_nor->base +
> +		       MTK_NOR_PRGDATA3_REG);
> +		writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
> +		       MTK_NOR_DUAL_REG);
> +		break;
> +	default:
> +		writeb(SPINOR_OP_READ, mt8173_nor->base +
> +		       MTK_NOR_PRGDATA3_REG);
> +		writeb(MTK_NOR_DUAL_DISABLE, mt8173_nor->base +
> +		       MTK_NOR_DUAL_REG);
> +		break;
> +	}
> +}
> +
> +static int mt8173_nor_polling_reg(struct mt8173_nor *mt8173_nor, int compare)
> +{
> +	int reg, ret;
> +
> +	ret =  readl_poll_timeout(mt8173_nor->base + MTK_NOR_CMD_REG, reg,
> +				  !(reg & compare), 100, 10000);
> +	if (ret)
> +		dev_err(mt8173_nor->dev, "compare val%02X timeout!\n", compare);
> +	return ret;
> +}
> +
> +static int mt8173_nor_execute_cmd(struct mt8173_nor *mt8173_nor, u8 cmdval)
> +{
> +	u8 val = cmdval & 0x1f;
> +
> +	writeb(cmdval, mt8173_nor->base + MTK_NOR_CMD_REG);
> +	return mt8173_nor_polling_reg(mt8173_nor, val);

mt8173_nor_polling_reg() is used only once here. You can inline the code
here.

> +}
> +
> +static int mt8173_nor_set_cmd(struct mt8173_nor *mt8173_nor, int addr,
> +			      int len, int op)
> +{
> +	writeb(op, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
> +	/* reset the following register */

We see that some register writes follow, this comment doesn't contain
any additional information.

> +	writeb(LoByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA4_REG);
> +	writeb(HiByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA3_REG);
> +	writeb(LoByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA2_REG);

Just do a:

(addr >> 16) & 0xff
(addr >> 8) & 0xff
addr & 0xff

It's a pattern every lowlevel programmer recognizes without thinking
about it. Same for the other places where these defines are used.

> +	writeb(len, mt8173_nor->base + MTK_NOR_CNT_REG);
> +	return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PRG_CMD);
> +}
> +
> +static int mt8173_nor_get_para(struct mt8173_nor *mt8173_nor, u8 *buf, int len)
> +{
> +	if (len > 1) {
> +		/* read JEDEC ID need 4 bytes commands */
> +		mt8173_nor_set_cmd(mt8173_nor, 0, 32, SPINOR_OP_RDID);
> +		buf[2] = readb(mt8173_nor->base + MTK_NOR_SHREG0_REG);
> +		buf[1] = readb(mt8173_nor->base + MTK_NOR_SHREG1_REG);
> +		buf[0] = readb(mt8173_nor->base + MTK_NOR_SHREG2_REG);
> +	} else {
> +		if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_RDSR_CMD)) {
> +			dev_err(mt8173_nor->dev, "read status failed!\n");
> +			return -EINVAL;
> +		}
> +		*buf = readb(mt8173_nor->base + MTK_NOR_RDSR_REG);
> +	}
> +	return 0;
> +}
> +
> +/* cmd1 sent to nor flash, cmd2 write to nor controller */
> +static int mt8173_nor_set_para(struct mt8173_nor *mt8173_nor, int cmd1,
> +			       int cmd2)
> +{
> +	if (mt8173_nor_set_cmd(mt8173_nor, 0, 8, SPINOR_OP_WREN)) {
> +		dev_err(mt8173_nor->dev,
> +			"write enable failed in write protect!\n");
> +		return -EINVAL;
> +	}
> +	writeb(cmd1, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
> +	writeb(8, mt8173_nor->base + MTK_NOR_CNT_REG);
> +	if (mt8173_nor_execute_cmd(mt8173_nor, cmd2)) {
> +		dev_err(mt8173_nor->dev, "execute cmd failed!\n");

mt8173_nor_execute_cmd() will already have printed an error message.

> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static int mt8173_nor_write_buffer_enable(struct mt8173_nor *mt8173_nor)
> +{
> +	u8 reg, ret;
> +
> +	writel(MTK_NOR_WR_BUF_ENABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
> +	ret =  readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
> +				  0x01 == (reg & 0x01), 100, 10000);
> +	if (ret)
> +		dev_err(mt8173_nor->dev, "timeout!\n");
> +	return ret;
> +}
> +
> +static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor)
> +{
> +	u8 reg, ret;
> +
> +	writel(MTK_NOR_WR_BUF_DISABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
> +	ret =  readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
> +				  MTK_NOR_WR_BUF_DISABLE == (reg & 0xf), 100,
> +				  10000);
> +	if (ret)
> +		dev_err(mt8173_nor->dev, "compare timeout!\n");
> +	return ret;
> +}
> +
> +static int mt8173_nor_erase_sector(struct spi_nor *nor, loff_t offset)
> +{
> +	struct mt8173_nor *mt8173_nor = nor->priv;
> +
> +	if (mt8173_nor_set_cmd(mt8173_nor, 0, 8, SPINOR_OP_WREN)) {
> +		dev_err(mt8173_nor->dev,
> +			"write enable failed in erase sector!\n");
> +		return -EINVAL;
> +	}
> +
> +	mt8173_nor_set_cmd(mt8173_nor, (int)offset, 32, SPINOR_OP_BE_4K);
> +	return 0;
> +}
> +
> +static int mt8173_nor_read_hw(struct mt8173_nor *mt8173_nor, int addr, int len,
> +			      int *retlen, u8 *buf)
> +{
> +	int ret = 0, i;
> +
> +	mt8173_nor_set_read_mode(mt8173_nor);
> +	writeb(HiByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_RADR3_REG);
> +	writeb(LoByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> +	writeb(HiByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> +	writeb(LoByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> +
> +	for (i = 0; i < len; i++, (*retlen)++) {
> +		if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD)) {
> +			dev_err(mt8173_nor->dev, "read flash failed!\n");
> +			return -EINVAL;
> +		}
> +		buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG);
> +	}
> +	return ret;

ret will always be 0 here, drop the ret variable.

> +}
> +
> +static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t len,
> +			   size_t *retlen, u_char *buf)
> +{
> +	struct mt8173_nor *mt8173_nor = nor->priv;
> +
> +	return mt8173_nor_read_hw(mt8173_nor, (int)from, (int)len,
> +				 (int *)retlen, (u8 *)buf);

mt8173_nor_read_hw is used only once here, no need for a separate
function.

> +}
> +
> +static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor,
> +					int u4addr, u8 u1data)
> +{
> +	if (u4addr >= mt8173_nor->mtd.size) {
> +		dev_err(mt8173_nor->dev, "invalid write address!\n");
> +		return -EINVAL;
> +	}
> +
> +	writeb(u1data, mt8173_nor->base + MTK_NOR_WDATA_REG);
> +	writeb(LoByte(HiWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> +	writeb(HiByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> +	writeb(LoByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> +
> +	if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD)) {
> +		dev_err(mt8173_nor->dev, "write byte offset%08x\n", u4addr);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int u4addr,
> +				   int u4len, const u8 *buf)
> +{
> +	int i, j, bufidx, data;
> +
> +	if (!buf)
> +		return -EINVAL;
> +
> +	writeb(LoByte(HiWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> +	writeb(HiByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> +	writeb(LoByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> +
> +	bufidx = 0;
> +	for (i = 0; i < u4len; i += 4) {
> +		for (j = 0; j < 4; j++) {
> +			(*((u8 *)&data + j)) = buf[bufidx];
> +			bufidx++;
> +		}
> +		writel(data, mt8173_nor->base + MTK_NOR_PP_DATA_REG);
> +	}
> +
> +	if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD)) {
> +		dev_err(mt8173_nor->dev, "write buffer offset:%08x\n", u4addr);
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +static void mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len,
> +			     size_t *retlen, const u_char *buf)
> +{
> +	struct mt8173_nor *mt8173_nor = nor->priv;
> +	size_t i;
> +
> +	if (nor->page_size == len) {
> +		if (mt8173_nor_write_buffer_enable(mt8173_nor))
> +			dev_err(mt8173_nor->dev, "write buffer enable failed !\n");
> +		while (len > 0) {
> +			mt8173_nor_write_buffer(mt8173_nor, to,
> +						SFLASH_WRBUF_SIZE, buf);
> +			len -= SFLASH_WRBUF_SIZE;
> +			to += SFLASH_WRBUF_SIZE;
> +			buf += SFLASH_WRBUF_SIZE;
> +			(*retlen) += SFLASH_WRBUF_SIZE;
> +		}
> +		if (mt8173_nor_write_buffer_disable(mt8173_nor))
> +			dev_err(mt8173_nor->dev, "write buffer disable failed !\n");
> +	} else {
> +		for (i = 0; i < len; i++,  (*retlen)++) {
> +			if (mt8173_nor_write_single_byte(mt8173_nor, to, *buf))
> +				dev_err(mt8173_nor->dev, "write byte failed !\n");
> +			to++;
> +			buf++;
> +		}
> +	}
> +}

Instead of using the buffer write method only for page_size sized writes
I would expect a behaviour of this function like:

	while (len > SFLASH_WRBUF_SIZE) {
		write_buffer();
		len -= SFLASH_WRBUF_SIZE;
	}

	while (len) {
		write_single_byte();
		len--;
	}

> +
> +static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
> +{
> +	int ret = 0;
> +	struct mt8173_nor *mt8173_nor = nor->priv;
> +	/* mtk nor controller haven't supoort SPINOR_OP_RDCR */
> +	if (opcode == SPINOR_OP_RDID || opcode == SPINOR_OP_RDSR)
> +		ret = mt8173_nor_get_para(mt8173_nor, buf, len);
> +	else
> +		dev_warn(mt8173_nor->dev, "invalid cmd %d\n", opcode);
> +
> +	return ret;
> +}
> +
> +static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
> +				int len, int write_enable)
> +{
> +	int ret, cmd_to_nor, cmd_to_controller;
> +	struct mt8173_nor *mt8173_nor = nor->priv;
> +
> +	if (opcode == SPINOR_OP_WRSR || opcode == SPINOR_OP_CHIP_ERASE) {
> +		if (len > 0) {
> +			cmd_to_nor = *buf;
> +			cmd_to_controller = MTK_NOR_WRSR_CMD;
> +		} else {
> +			cmd_to_nor = opcode;
> +			cmd_to_controller = MTK_NOR_PRG_CMD;
> +		}
> +		ret = mt8173_nor_set_para(mt8173_nor, cmd_to_nor,
> +					  cmd_to_controller);
> +	} else if (opcode == SPINOR_OP_WREN || opcode == SPINOR_OP_WRDI) {
> +		ret = mt8173_nor_set_cmd(mt8173_nor, 0, 8, opcode);
> +	} else {
> +		dev_warn(mt8173_nor->dev, "have not support cmd %d\n", opcode);
> +		ret = -EINVAL;
> +	}
> +	return ret;
> +}
> +
> +static int __init mtk_nor_init(struct mt8173_nor *mt8173_nor,
> +			       struct mtd_part_parser_data ppdata)

Why a copy and not a pointer to struct mtd_part_parser_data?

> +{
> +	int ret;
> +	struct spi_nor *nor;
> +	struct mtd_info *mtd;
> +
> +	writel(MTK_NOR_ENABLE_SF_CMD, mt8173_nor->base + MTK_NOR_WRPROT_REG);
> +	nor = &mt8173_nor->nor;
> +	mtd = &mt8173_nor->mtd;
> +	nor->mtd = mt8173_nor->mtd;
> +	nor->dev = mt8173_nor->dev;
> +	nor->priv = mt8173_nor;
> +	mtd->priv = nor;
> +
> +	/* fill the hooks to spi nor */
> +	nor->read = mt8173_nor_read;
> +	nor->read_reg = mt8173_nor_read_reg;
> +	nor->write = mt8173_nor_write;
> +	nor->write_reg = mt8173_nor_write_reg;
> +	nor->erase = mt8173_nor_erase_sector;
> +	nor->mtd.owner = THIS_MODULE;
> +	nor->mtd.name = "mtk_nor";
> +	/* initialized with NULL */
> +	ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL);
> +	if (ret) {
> +		dev_err(mt8173_nor->dev, "spi_nor_scan failed !\n");
> +		return -EINVAL;

Just forward the error from spi_nor_scan.

> +	}
> +	dev_dbg(mt8173_nor->dev, "mtd->size :0x%llx!\n", mtd->size);
> +	ret = mtd_device_parse_register(&nor->mtd, NULL, &ppdata, NULL, 0);
> +
> +	return ret;
> +}
> +
> +static int mtk_nor_drv_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct mtd_part_parser_data ppdata;
> +	struct resource *res;
> +	int ret;
> +	struct mt8173_nor *mt8173_nor = devm_kzalloc(&pdev->dev,
> +		sizeof(*mt8173_nor), GFP_KERNEL);
> +
> +	if (!pdev->dev.of_node) {
> +		dev_err(&pdev->dev, "No DT found\n");
> +		return -EINVAL;
> +	}
> +
> +	if (!mt8173_nor)
> +		return -ENOMEM;
> +	platform_set_drvdata(pdev, mt8173_nor);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	mt8173_nor->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(mt8173_nor->base)) {
> +		ret = PTR_ERR(mt8173_nor->base);
> +		goto nor_free;
> +	}
> +
> +	mt8173_nor->spi_clk = devm_clk_get(&pdev->dev, "spi_clk");
> +	if (IS_ERR(mt8173_nor->spi_clk)) {
> +		ret = PTR_ERR(mt8173_nor->spi_clk);
> +		goto nor_free;
> +	}
> +
> +	mt8173_nor->src_axi_clk = devm_clk_get(&pdev->dev, "axi_clk");
> +	if (IS_ERR(mt8173_nor->src_axi_clk)) {
> +		ret = PTR_ERR(mt8173_nor->src_axi_clk);
> +		goto nor_free;
> +	}
> +
> +	mt8173_nor->sf_mux_clk = devm_clk_get(&pdev->dev, "mux_clk");
> +	if (IS_ERR(mt8173_nor->sf_mux_clk)) {
> +		ret = PTR_ERR(mt8173_nor->sf_mux_clk);
> +		goto nor_free;
> +	}
> +
> +	mt8173_nor->nor_clk = devm_clk_get(&pdev->dev, "sf_clk");
> +	if (IS_ERR(mt8173_nor->nor_clk)) {
> +		ret = PTR_ERR(mt8173_nor->nor_clk);
> +		goto nor_free;
> +	}
> +
> +	mt8173_nor->dev = &pdev->dev;
> +	clk_prepare_enable(mt8173_nor->spi_clk);
> +	clk_prepare_enable(mt8173_nor->src_axi_clk);
> +	clk_prepare_enable(mt8173_nor->sf_mux_clk);
> +	clk_prepare_enable(mt8173_nor->nor_clk);
> +	clk_set_parent(mt8173_nor->nor_clk, mt8173_nor->sf_mux_clk);

sf_mux_clk is inherently enabled when you enable one of its child
clocks, like nor_clk in this case, so you don't have to enable it
explicitly.
Also putting knowledge of the SoCs clock layout into the driver is a bad
idea. There is the assigned-clock-parents binding which you can use here
for assigning the clock parent.

> +
> +	ppdata.of_node = np;
> +	ret = mtk_nor_init(mt8173_nor, ppdata);
> +
> +nor_free:
> +	return ret;
> +}
> +
> +static int mtk_nor_drv_remove(struct platform_device *pdev)
> +{
> +	struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
> +
> +	clk_disable_unprepare(mt8173_nor->spi_clk);
> +	clk_disable_unprepare(mt8173_nor->src_axi_clk);
> +	clk_disable_unprepare(mt8173_nor->sf_mux_clk);
> +	clk_disable_unprepare(mt8173_nor->nor_clk);
> +	mtd_device_unregister(&mt8173_nor->mtd);

This order is wrong. You should not disable clocks on a device that
might be active. You should unregister it first and disable the clocks
afterwards.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the Linux-mediatek mailing list