[PATCH v2] pwm-backlight: fix the panel power sequence

[Philipp Zabel]

Hi YH,

Am Donnerstag, den 22.10.2015, 23:12 +0800 schrieb YH Huang:
> In the case of the panel disabled by the bootloader,
> your patch still has the following code and always enables the backlight
> in the probe function.
> pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
> -						  GPIOD_OUT_HIGH);

You are right.

> What do you think if I remove these two lines in my patch?
> if (pb->enable_gpio)
> 	gpiod_direction_output(pb->enable_gpio, 0);

That won't work if the gpio is still configured as input. How about I
add the GPIOD_ASIS change to my patch you remove that and the above from
yours?

best regards
Philipp