[PATCH 1/9] clockevents/drivers/mtk: Fix spurious interrupt leading to crash
Matthias Brugger
matthias.bgg at gmail.com
Thu Oct 22 12:50:54 PDT 2015
2015-10-19 22:59 GMT+02:00 Daniel Lezcano <daniel.lezcano at linaro.org>:
> After analysis done by Yingjoe Chen, the timer appears to have a pending
> interrupt when it is enabled.
>
> Fix this by acknowledging the pending interrupt when enabling the timer
> interrupt.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
> Tested-by: Yingjoe Chen <yingjoe.chen at mediatek.com>
Acked-by: Matthias Brugger <matthias.bgg at gmail.com>
> ---
> drivers/clocksource/mtk_timer.c | 16 ++++++----------
> 1 file changed, 6 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
> index 50f0641..c8badc4 100644
> --- a/drivers/clocksource/mtk_timer.c
> +++ b/drivers/clocksource/mtk_timer.c
> @@ -141,14 +141,6 @@ static irqreturn_t mtk_timer_interrupt(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static void mtk_timer_global_reset(struct mtk_clock_event_device *evt)
> -{
> - /* Disable all interrupts */
> - writel(0x0, evt->gpt_base + GPT_IRQ_EN_REG);
> - /* Acknowledge all interrupts */
> - writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
> -}
> -
> static void
> mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer, u8 option)
> {
> @@ -168,6 +160,12 @@ static void mtk_timer_enable_irq(struct mtk_clock_event_device *evt, u8 timer)
> {
> u32 val;
>
> + /* Disable all interrupts */
> + writel(0x0, evt->gpt_base + GPT_IRQ_EN_REG);
> +
> + /* Acknowledge all spurious pending interrupts */
> + writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
> +
> val = readl(evt->gpt_base + GPT_IRQ_EN_REG);
> writel(val | GPT_IRQ_ENABLE(timer),
> evt->gpt_base + GPT_IRQ_EN_REG);
> @@ -220,8 +218,6 @@ static void __init mtk_timer_init(struct device_node *node)
> }
> rate = clk_get_rate(clk);
>
> - mtk_timer_global_reset(evt);
> -
> if (request_irq(evt->dev.irq, mtk_timer_interrupt,
> IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) {
> pr_warn("failed to setup irq %d\n", evt->dev.irq);
> --
> 1.9.1
>
--
motzblog.wordpress.com
More information about the Linux-mediatek
mailing list