[PATCH 3/4] mmc: mediatek: Add tune support
Sascha Hauer
s.hauer at pengutronix.de
Thu Oct 15 01:58:32 PDT 2015
On Thu, Oct 15, 2015 at 04:40:02PM +0800, Chaotian Jing wrote:
> On Thu, 2015-10-15 at 08:29 +0200, Sascha Hauer wrote:
> > Hi,
> >
> > On Tue, Oct 13, 2015 at 05:37:57PM +0800, Chaotian Jing wrote:
> > > @@ -1260,6 +1547,16 @@ static int msdc_drv_probe(struct platform_device *pdev)
> > > goto host_free;
> > > }
> > >
> > > + host->src_clk_parent = clk_get_parent(host->src_clk);
> > > + host->hs400_src = devm_clk_get(&pdev->dev, "400mhz");
> > > + if (IS_ERR(host->hs400_src)) {
> > > + dev_dbg(&pdev->dev, "Cannot find 400mhz at dts!\n");
> > > + } else if (clk_set_parent(host->src_clk_parent, host->hs400_src) < 0) {
> > > + dev_err(host->dev, "Failed to set 400mhz source clock!\n");
> > > + ret = -EINVAL;
> > > + goto host_free;
> > > + }
> >
> > This is a static setup. We have device tree bindings for doing this.
> > Please look for assigned-clocks and assigned-clock-parents. Doing stuff
> > like this in the driver almost certainly leads to problems because the
> > next SoC will have different requirements here.
> >
>
> Sorry, I cannot understand it, could you help to give some sample code
> about this ?
assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>
assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>
Have a look at drivers/clk/clk-conf.c and
Documentation/devicetree/bindings/clock/clock-bindings.txt
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the Linux-mediatek
mailing list