[PATCH v9 4/5] xhci: mediatek: support MTK xHCI host controller

Daniel Thompson daniel.thompson at linaro.org
Thu Oct 1 04:44:41 PDT 2015


On 29/09/15 04:01, Chunfeng Yun wrote:
> There some vendor quirks for MTK xhci host controller:
> 1. It defines some extra SW scheduling parameters for HW
>    to minimize the scheduling effort for synchronous and
>    interrupt endpoints. The parameters are put into reseved
>    DWs of slot context and endpoint context.
> 2. Its IMODI unit for Interrupter Moderation register is
>    8 times as much as that defined in xHCI spec.
> 3. Its TDS in  Normal TRB defines a number of packets that
>    remains to be transferred for a TD after processing all
>    Max packets in all previous TRBs.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>

I've done some basic soak tests, both with a directly attached USB3 HDD 
and, given the extra code to manage isochronous xfer, also with a hub, 
disc and two audio interfaces.

Tested-by: Daniel Thompson <daniel.thompson at linaro.org>


> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 57f40a1..243f696 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -68,6 +68,7 @@
>   #include <linux/slab.h>
>   #include "xhci.h"
>   #include "xhci-trace.h"
> +#include "xhci-mtk.h"
>
>   /*
>    * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
> @@ -3044,18 +3045,27 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
>   			      struct urb *urb, unsigned int num_trbs_left)
>   {
>   	u32 maxp, total_packet_count;
> +	u32 skip_current_trb = 0;

A bit of a nitpick but why do we need skip_current_trb? Testing 
(xhci->quirks & XHCI_MTK_HOST) twice would make what the code does, and 
why, more obvious.

Anyhow with that looked at, and the caveat that I'm not much of USB 
expert, you're welcome to add my Reviewed-by: to v10.

>
> -	if (xhci->hci_version < 0x100)
> -		return ((td_total_len - transferred) >> 10);
> -
> -	maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
> -	total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
> +	if (xhci->hci_version < 0x100) {
> +		/* for MTK xHCI, TD size doesn't include this TRB */
> +		if (xhci->quirks & XHCI_MTK_HOST)
> +			skip_current_trb = 1;
> +		else
> +			return ((td_total_len - transferred) >> 10);
> +	}
>
>   	/* One TRB with a zero-length data packet. */
>   	if (num_trbs_left == 0 || (transferred == 0 && trb_buff_len == 0) ||
>   	    trb_buff_len == td_total_len)
>   		return 0;
>
> +	if (skip_current_trb)
> +		trb_buff_len = 0;
> +
> +	maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
> +	total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
> +
>   	/* Queueing functions don't count the current TRB into transferred */
>   	return (total_packet_count - ((transferred + trb_buff_len) / maxp));
>   }


Daniel.




More information about the Linux-mediatek mailing list