[RESEND RFC/PATCH 1/8] dt-bindings: Add a binding for Mediatek Video Processor Unit

[Mark Rutland]

On Tue, Nov 17, 2015 at 08:54:38PM +0800, Tiffany Lin wrote:
> From: Andrew-CT Chen <andrew-ct.chen at mediatek.com>
> 
> Add a DT binding documentation of Video Processor Unit for the
> MT8173 SoC from Mediatek.
> 
> Signed-off-by: Andrew-CT Chen <andrew-ct.chen at mediatek.com>
> ---
>  .../devicetree/bindings/media/mediatek-vpu.txt     |   27 ++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek-vpu.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek-vpu.txt b/Documentation/devicetree/bindings/media/mediatek-vpu.txt
> new file mode 100644
> index 0000000..99a4e5e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-vpu.txt
> @@ -0,0 +1,27 @@
> +* Mediatek Video Processor Unit
> +
> +Video Processor Unit is a HW video controller. It controls HW Codec including
> +H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color convert).
> +
> +Required properties:
> +  - compatible: "mediatek,mt8173-vpu"
> +  - reg: Must contain an entry for each entry in reg-names.
> +  - reg-names: Must include the following entries:
> +    "sram": SRAM base
> +    "cfg_reg": Main configuration registers base
> +  - interrupts: interrupt number to the cpu.
> +  - clocks : clock name from clock manager
> +  - clock-names: the clocks of the VPU H/W

You need to explicitly define the set of clock-names you expect here.

Mark.

> +  - iommus : phandle and IOMMU spcifier for the IOMMU that serves the VPU.
> +
> +Example:
> +	vpu: vpu at 10020000 {
> +		compatible = "mediatek,mt8173-vpu";
> +		reg = <0 0x10020000 0 0x30000>,
> +		      <0 0x10050000 0 0x100>;
> +		reg-names = "sram", "cfg_reg";
> +		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&topckgen TOP_SCP_SEL>;
> +		clock-names = "main";
> +		iommus = <&iommu M4U_PORT_VENC_RCPU>;
> +	};
> -- 
> 1.7.9.5
>