[PATCH v5 4/5] ARM: dts: mt8135: enable basic SMP bringup for mt8135
Eddie Huang
eddie.huang at mediatek.com
Tue Nov 10 23:55:57 PST 2015
Hi Kevin,
On Tue, 2015-11-10 at 17:16 -0800, Kevin Hilman wrote:
> Hi Eddie,
>
> [...]
>
> > I check the log [0],
>
> Thanks for checking into this boot failure.
>
> > it seems first time mt8135-evbp1 boot to kernel
> > shell successfully, then boot again. In the second time, mt8135 stay in
> > fastboot mode, waiting host send boot image, then timeout.
>
> Actually, it never gets to a shell the first time. If you look closely,
> the target reboots as soon as userspace starts. Look for the PYBOOT
> line which says "finished booting, starting userspace"
>
> Later on, pyboot thinks it finds a root shell due to finding '#'
> characters, but clearly it never got to a shell.
>
> > I download zImage and dtb in [1], and kernel run to shell successfully
> > on my platform.
>
> Are you can you try using a ramdisk as well? You can use the pre-built
> one here:
> http://storage.kernelci.org/images/rootfs/buildroot/armel/rootfs.cpio.gz
>
Yes, I tried this ramdisk, and I can reproduce fail issue.
> Please check my boot logs to see how I'm generating the boot.img file
> (search for mkbootimg) with a kernel/dtb/ramdisk. It may be possible
> that the kernel image size with a ramdisk is breaking some of the
> assumptions in the fastboot mode. I've seen problems like this on other
> platforms due to hard-coded sizes/addresses in the boot firmware.
>
MT8135 allocate 10MB for BOOT partition, but the test boot.img is 11MB,
thus cause user space fail. I will prepare new firmware that extend BOOT
partition to 16MB. and put new firmware on Howard's github. I will mail
to you when I am ready..
Eddie
Thanks
More information about the Linux-mediatek
mailing list