[PATCH v2 4/6] soc: mediatek: Add SMI driver
Matthias Brugger
matthias.bgg at gmail.com
Tue May 19 04:14:24 PDT 2015
2015-05-15 11:43 GMT+02:00 Yong Wu <yong.wu at mediatek.com>:
> This patch add SMI(Smart Multimedia Interface) driver. This driver is
> responsible to enable/disable iommu and control the clocks of each local arbiter.
>
> Signed-off-by: Yong Wu <yong.wu at mediatek.com>
> ---
> drivers/soc/mediatek/Kconfig | 6 +
> drivers/soc/mediatek/Makefile | 1 +
> drivers/soc/mediatek/mt8173-smi.c | 298 ++++++++++++++++++++++++++++++++++++++
> include/linux/mtk-smi.h | 39 +++++
> 4 files changed, 344 insertions(+)
> create mode 100644 drivers/soc/mediatek/mt8173-smi.c
> create mode 100644 include/linux/mtk-smi.h
>
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index 1d34819..5935ead 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -15,3 +15,9 @@ config MTK_SCPSYS
> help
> Say yes here to add support for the MediaTek SCPSYS power domain
> driver.
> +
> +config MTK_SMI
> + bool
> + help
> + Smi help enable/disable iommu in MediaTek SoCs and control the clock
> + for each local arbiter.
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index ce88693..c086261 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1,2 +1,3 @@
> obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> +obj-$(CONFIG_MTK_SMI) += mt8173-smi.o
> diff --git a/drivers/soc/mediatek/mt8173-smi.c b/drivers/soc/mediatek/mt8173-smi.c
> new file mode 100644
> index 0000000..67bccec
> --- /dev/null
> +++ b/drivers/soc/mediatek/mt8173-smi.c
> @@ -0,0 +1,298 @@
> +/*
> + * Copyright (c) 2014-2015 MediaTek Inc.
> + * Author: Yong Wu <yong.wu at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/mm.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/mtk-smi.h>
> +
> +#define SMI_LARB_MMU_EN (0xf00)
> +#define F_SMI_MMU_EN(port) (1 << (port))
> +
> +enum {
> + MTK_CLK_APB,
> + MTK_CLK_SMI,
> + MTK_CLK_MAX,
Maybe add something like:
MTK_CLK_FIRST = MTK_CLK_APB,
to make the for loops better readable.
> +};
> +
> +struct mtk_smi_common {
> + void __iomem *base;
That seems to be never used. Please delete it.
> + struct clk *clk[MTK_CLK_MAX];
> +};
> +
> +struct mtk_smi_larb {
> + void __iomem *base;
> + spinlock_t portlock; /* lock for config port */
> + struct clk *clk[MTK_CLK_MAX];
> + struct device *smi;
> +};
> +
> +static const char * const mtk_smi_clk_name[MTK_CLK_MAX] = {
> + "apb", "smi"
> +};
> +
> +static int mtk_smi_common_get(struct device *smidev)
> +{
> + struct mtk_smi_common *smipriv = dev_get_drvdata(smidev);
> + int i, ret;
> +
> + for (i = MTK_CLK_APB; i < MTK_CLK_MAX; i++) {
> + ret = clk_enable(smipriv->clk[i]);
> + if (ret) {
> + dev_err(smidev,
> + "Failed to enable the clock of smi_common\n");
> + goto err_smi_clk;
> + }
> + }
> + return ret;
> +
> +err_smi_clk:
> + if (i == MTK_CLK_SMI)
> + clk_disable(smipriv->clk[MTK_CLK_APB]);
> + return ret;
> +}
> +
> +static void mtk_smi_common_put(struct device *smidev)
> +{
> + struct mtk_smi_common *smipriv = dev_get_drvdata(smidev);
> + int i;
> +
> + for (i = MTK_CLK_SMI; i >= MTK_CLK_APB; i--)
> + clk_disable(smipriv->clk[i]);
> +}
> +
> +int mtk_smi_larb_get(struct device *larbdev)
> +{
> + struct mtk_smi_larb *larbpriv = dev_get_drvdata(larbdev);
> + int i, ret = 0;
> +
> + ret = mtk_smi_common_get(larbpriv->smi);
> + if (ret)
> + return ret;
> +
> + for (i = MTK_CLK_APB; i < MTK_CLK_MAX; i++) {
> + ret = clk_enable(larbpriv->clk[i]);
> + if (ret) {
> + dev_err(larbdev,
> + "Failed to enable larb clock%d. ret 0x%x\n",
> + i, ret);
> + goto err_larb_clk;
> + }
> + }
> +
> + return ret;
> +
> +err_larb_clk:
> + if (i == MTK_CLK_SMI)
> + clk_disable(larbpriv->clk[MTK_CLK_APB]);
> + mtk_smi_common_put(larbpriv->smi);
> + return ret;
> +}
> +
> +void mtk_smi_larb_put(struct device *larbdev)
You can pass mtk_smi_larb as parameter instead of struct device
> +{
> + struct mtk_smi_larb *larbpriv = dev_get_drvdata(larbdev);
> + int i;
> +
> + for (i = MTK_CLK_SMI; i >= MTK_CLK_APB; i--)
> + clk_disable(larbpriv->clk[i]);
> +
> + mtk_smi_common_put(larbpriv->smi);
> +}
> +
> +int mtk_smi_config_port(struct device *larbdev, unsigned int larbportid,
> + bool iommuen)
> +{
> + struct mtk_smi_larb *larbpriv = dev_get_drvdata(larbdev);
> + unsigned long flags;
> + int ret;
> + u32 reg;
> +
> + ret = mtk_smi_larb_get(larbdev);
> + if (ret)
> + return ret;
> +
> + spin_lock_irqsave(&larbpriv->portlock, flags);
> + reg = readl(larbpriv->base + SMI_LARB_MMU_EN);
> + reg &= ~F_SMI_MMU_EN(larbportid);
> + if (iommuen)
> + reg |= F_SMI_MMU_EN(larbportid);
> + writel(reg, larbpriv->base + SMI_LARB_MMU_EN);
> + spin_unlock_irqrestore(&larbpriv->portlock, flags);
> +
> + mtk_smi_larb_put(larbdev);
> +
> + return 0;
> +}
> +
> +static int mtk_smi_larb_probe(struct platform_device *pdev)
> +{
> + struct mtk_smi_larb *larbpriv;
> + struct resource *res;
> + struct device *dev = &pdev->dev;
> + struct device_node *smi_node;
> + struct platform_device *smi_pdev;
> + int i, ret;
> +
> + larbpriv = devm_kzalloc(dev, sizeof(struct mtk_smi_larb), GFP_KERNEL);
> + if (!larbpriv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + larbpriv->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(larbpriv->base)) {
> + dev_err(dev, "Failed to get the larbbase (0x%lx)\n",
> + PTR_ERR(larbpriv->base));
> + return PTR_ERR(larbpriv->base);
> + }
> +
> + for (i = MTK_CLK_APB; i < MTK_CLK_MAX; i++) {
> + larbpriv->clk[i] = devm_clk_get(dev, mtk_smi_clk_name[i]);
> +
> + if (IS_ERR(larbpriv->clk[i])) {
Please delete the blank line before the if.
> + ret = PTR_ERR(larbpriv->clk[i]);
> + dev_err(dev, "Failed to get larb%d clock (0x%x)\n",
> + i, ret);
> + goto fail_larb_clk;
> + } else {
> + ret = clk_prepare(larbpriv->clk[i]);
> + if (ret) {
> + dev_err(dev, "Failed to prepare larb clock%d (0x%x)\n",
> + i, ret);
> + goto fail_larb_clk;
> + }
> + }
> + }
> +
> + smi_node = of_parse_phandle(dev->of_node, "smi", 0);
> + if (!smi_node) {
> + dev_err(dev, "Failed to get smi node\n");
> + ret = -EINVAL;
> + goto fail_larb_clk;
> + }
> +
> + smi_pdev = of_find_device_by_node(smi_node);
> + of_node_put(smi_node);
> + if (smi_pdev) {
> + larbpriv->smi = &smi_pdev->dev;
> + } else {
> + dev_err(dev, "Failed to get the smi_common device\n");
> + ret = -EINVAL;
> + goto fail_larb_clk;
> + }
> +
> + spin_lock_init(&larbpriv->portlock);
> + dev_set_drvdata(dev, larbpriv);
> + return 0;
> +
> +fail_larb_clk:
> + while (--i >= MTK_CLK_APB)
> + clk_unprepare(larbpriv->clk[i]);
> + return ret;
> +}
> +
> +static const struct of_device_id mtk_smi_larb_of_ids[] = {
> + { .compatible = "mediatek,mt8173-smi-larb",
> + },
> + {}
> +};
> +
> +static struct platform_driver mtk_smi_larb_driver = {
> + .probe = mtk_smi_larb_probe,
> + .driver = {
> + .name = "mtksmilarb",
Huh, what about something more readable like mtk-smi-larb?
> + .of_match_table = mtk_smi_larb_of_ids,
> + }
> +};
> +
> +static int mtk_smi_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mtk_smi_common *smipriv;
> + int ret, i;
> +
> + smipriv = devm_kzalloc(dev, sizeof(*smipriv), GFP_KERNEL);
> + if (!smipriv)
> + return -ENOMEM;
> +
> + for (i = MTK_CLK_APB; i < MTK_CLK_MAX; i++) {
> + smipriv->clk[i] = devm_clk_get(dev, mtk_smi_clk_name[i]);
> +
> + if (IS_ERR(smipriv->clk[i])) {
> + ret = PTR_ERR(smipriv->clk[i]);
> + dev_err(dev, "Failed to get smi-%s clock (0x%x)\n",
> + mtk_smi_clk_name[i], ret);
> + goto fail_smi_clk;
> + } else {
> + ret = clk_prepare(smipriv->clk[i]);
> + if (ret) {
> + dev_err(dev, "Failed to prepare smi%d clock 0x%x\n",
> + i, ret);
> + goto fail_smi_clk;
> + }
> + }
> + }
> +
> + dev_set_drvdata(dev, smipriv);
> + return ret;
> +
> +fail_smi_clk:
> + if (i == MTK_CLK_SMI)
> + clk_unprepare(smipriv->clk[MTK_CLK_APB]);
> + return ret;
> +}
> +
> +static const struct of_device_id mtk_smi_of_ids[] = {
> + { .compatible = "mediatek,mt8173-smi",
> + },
> + {}
> +};
> +
> +static struct platform_driver mtk_smi_driver = {
> + .probe = mtk_smi_probe,
> + .driver = {
> + .name = "mtksmi",
Same here.
Thanks,
Matthias
More information about the Linux-mediatek
mailing list