[PATCH 2/2] pwm: add Mediatek display PWM driver support
Thierry Reding
thierry.reding at gmail.com
Tue May 12 06:32:04 PDT 2015
On Mon, May 11, 2015 at 05:26:22PM +0800, YH Huang wrote:
> Add display PWM driver support to modify backlight for MT8173/MT6595.
>
> Signed-off-by: YH Huang <yh.huang at mediatek.com>
> ---
> drivers/pwm/Kconfig | 9 ++
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-disp-mediatek.c | 225 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 235 insertions(+)
> create mode 100644 drivers/pwm/pwm-disp-mediatek.c
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index b1541f4..9edbb5a 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -111,6 +111,15 @@ config PWM_CLPS711X
> To compile this driver as a module, choose M here: the module
> will be called pwm-clps711x.
>
> +config PWM_DISP_MEDIATEK
Please make this "PWM_MEDIATEK_DISP" so we can keep everything sorted by
vendor.
> + tristate "MEDIATEK display PWM driver"
"MediaTek"?
> + depends on OF
Technically I think you need depends on HAS_IOMEM here to avoid breakage
on randconfig builds.
> + help
> + Generic PWM framework driver for mediatek disp-pwm device.
"MediaTek"? Also perhaps this should describe what this PWM is instead
of just the "disp-pwm" which leaves everyone guessing what it is. From
the name I'd expect it to be the PWM that is used to control the
backlight brightness for display, but I think this description should
say that explicitly.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called pwm-disp-mediatek.
pwm-mediatek-disp
> +
> config PWM_EP93XX
> tristate "Cirrus Logic EP93xx PWM support"
> depends on ARCH_EP93XX
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index ec50eb5..c5ff72a 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
> obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
> obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
> obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
> +obj-$(CONFIG_PWM_DISP_MEDIATEK) += pwm-disp-mediatek.o
Also name this "pwm-mediatek-disp.o" to reflect the Kconfig name.
> obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
> obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o
> obj-$(CONFIG_PWM_IMG) += pwm-img.o
> diff --git a/drivers/pwm/pwm-disp-mediatek.c b/drivers/pwm/pwm-disp-mediatek.c
> new file mode 100644
> index 0000000..38293af
> --- /dev/null
> +++ b/drivers/pwm/pwm-disp-mediatek.c
> @@ -0,0 +1,225 @@
> +/*
> + * Mediatek display pulse-width-modulation controller driver.
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: YH Huang <yh.huang at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/pwm.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#define DISP_PWM_EN_OFF (0x0)
The _OFF suffix here is unfortunate because I'm reading this as being
the "OFF" value for a field named "DISP_PWM_EN". I think it'd be better
to name this one DISP_PWM_EN. The same goes for any of the following
registers.
Also, drop the parentheses if the expression is simple.
> +#define PWM_ENABLE_SHIFT (0x0)
> +#define PWM_ENABLE_MASK (0x1 << PWM_ENABLE_SHIFT)
> +
> +#define DISP_PWM_COMMIT_OFF (0x08)
> +#define PWM_COMMIT_SHIFT (0x0)
> +#define PWM_COMMIT_MASK (0x1 << PWM_COMMIT_SHIFT)
> +
> +#define DISP_PWM_CON_0_OFF (0x10)
> +#define PWM_CLKDIV_SHIFT (0x10)
> +#define PWM_CLKDIV_MASK (0x3ff << PWM_CLKDIV_SHIFT)
> +#define PWM_CLKDIV_MAX (0x000003ff)
> +
> +#define DISP_PWM_CON_1_OFF (0x14)
> +#define PWM_PERIOD_SHIFT (0x0)
> +#define PWM_PERIOD_MASK (0xfff << PWM_PERIOD_SHIFT)
> +#define PWM_PERIOD_MAX (0x00000fff)
> +/* Shift log2(PWM_PERIOD_MAX + 1) as divisor */
> +#define PWM_PERIOD_BIT_SHIFT 12
This is confusing, see below.
> +
> +#define PWM_HIGH_WIDTH_SHIFT (0x10)
> +#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
> +
> +#define NUM_PWM 1
You can drop this, it's only used once.
> +
> +struct mtk_disp_pwm_chip {
> + struct pwm_chip chip;
> + struct device *dev;
> + struct clk *clk_main;
> + struct clk *clk_mm;
> + void __iomem *mmio_base;
> +};
Please don't add this artificial padding, a single space is enough as a
separator. Also, I think you can drop the _chip suffix on the structure
name.
> +
> +static void mtk_disp_pwm_setting(void __iomem *address, u32 value, u32 mask)
This is a bad name. I think you should adopt the naming of regmap, which
this effectively copies, so this should be:
static void mtk_disp_pwm_update_bits(void __iomem *address, u32 mask, u32 value)
> +static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> + int duty_ns, int period_ns)
> +{
> + struct mtk_disp_pwm_chip *mpc;
> + u64 div, rate;
> + u32 clk_div, period, high_width, rem;
> +
> + /*
> + * Find period, high_width and clk_div to suit duty_ns and period_ns.
> + * Calculate proper div value to keep period value in the bound.
> + *
> + * period_ns = 10^9 * (clk_div + 1) * (period +1) / PWM_CLK_RATE
> + * duty_ns = 10^9 * (clk_div + 1) * (high_width + 1) / PWM_CLK_RATE
> + *
> + * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
> + * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1)) - 1
> + */
> + mpc = container_of(chip, struct mtk_disp_pwm_chip, chip);
Can you add a static inline function to wrap the container_of()
invocation? You need to do this quite often and the wrapper will shorten
the code significantly:
static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
{
return container_of(chip, struct mtk_disp_pwm, chip);
}
Also it's slightly more canonical to initialize the mpc variable as part
of the declaration.
> + rate = clk_get_rate(mpc->clk_main);
> + clk_div = div_u64_rem(rate * period_ns, NSEC_PER_SEC, &rem) >>
> + PWM_PERIOD_BIT_SHIFT;
> + if (clk_div > PWM_CLKDIV_MAX)
> + return -EINVAL;
> +
> + div = clk_div + 1;
> + period = div64_u64(rate * period_ns, NSEC_PER_SEC * div);
> + if (period > 0)
> + period--;
> + high_width = div64_u64(rate * duty_ns, NSEC_PER_SEC * div);
> + if (high_width > 0)
> + high_width--;
> +
> + mtk_disp_pwm_setting(mpc->mmio_base + DISP_PWM_CON_0_OFF,
> + clk_div << PWM_CLKDIV_SHIFT, PWM_CLKDIV_MASK);
> + mtk_disp_pwm_setting(mpc->mmio_base + DISP_PWM_CON_1_OFF,
> + (period << PWM_PERIOD_SHIFT) |
> + (high_width << PWM_HIGH_WIDTH_SHIFT),
> + PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK);
Can you align these differently to make it more readable?
mtk_display_pwm_update_bits(mpc->mmio_base + DISP_PWM_CON_1,
PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
(period << PWM_PERIOD_SHIFT) |
(high_width << PWM_HIGH_WIDTH_SHIFT));
Or perhaps split it into multiple steps to make it even more readable:
value = (high_width << PWM_HIGH_WIDTH_SHIFT) |
(period << PWM_PERIOD_SHIFT);
mtk_display_pwm_update_bits(mpc->mmio_base + DISP_PWM_CON_1,
PWM_HIGH_WIDTH_MASK | PWM_PERIOD_MASK,
value);
> +static int mtk_disp_pwm_probe(struct platform_device *pdev)
> +{
> + struct mtk_disp_pwm_chip *pwm;
> + struct resource *r;
> + int ret;
> +
> + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
> + if (!pwm)
> + return -ENOMEM;
> +
> + pwm->dev = &pdev->dev;
> +
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
> + if (IS_ERR(pwm->mmio_base))
> + return PTR_ERR(pwm->mmio_base);
> +
> + pwm->clk_main = devm_clk_get(&pdev->dev, "main");
> + if (IS_ERR(pwm->clk_main))
> + return PTR_ERR(pwm->clk_main);
> + pwm->clk_mm = devm_clk_get(&pdev->dev, "mm");
I think it's more readable if a blank line separates the above two
lines.
> + if (IS_ERR(pwm->clk_mm))
> + return PTR_ERR(pwm->clk_mm);
> +
> + ret = clk_prepare_enable(pwm->clk_main);
> + if (ret < 0)
> + return ret;
> + ret = clk_prepare_enable(pwm->clk_mm);
Same here.
> + if (ret < 0) {
> + clk_disable_unprepare(pwm->clk_main);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, pwm);
> +
> + pwm->chip.dev = &pdev->dev;
> + pwm->chip.ops = &mtk_disp_pwm_ops;
> + pwm->chip.base = -1;
> + pwm->chip.npwm = NUM_PWM;
> +
> + ret = pwmchip_add(&pwm->chip);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
Shouldn't you disable the clocks here?
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_disp_pwm_remove(struct platform_device *pdev)
> +{
> + struct mtk_disp_pwm_chip *pc = platform_get_drvdata(pdev);
> +
> + if (WARN_ON(!pc))
> + return -ENODEV;
You can drop this. Better to let it crash so that you have to fix it if
you ever encounter it.
> +
> + clk_disable_unprepare(pc->clk_main);
> + clk_disable_unprepare(pc->clk_mm);
> +
> + return pwmchip_remove(&pc->chip);
> +}
> +
> +static const struct of_device_id mtk_disp_pwm_of_match[] = {
> + { .compatible = "mediatek,mt6595-disp-pwm" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
No blank line between the above two lines.
> +
> +static struct platform_driver mtk_disp_pwm_driver = {
> + .driver = {
> + .name = "mediatek-disp-pwm",
> + .owner = THIS_MODULE,
> + .of_match_table = mtk_disp_pwm_of_match,
> + },
> + .probe = mtk_disp_pwm_probe,
> + .remove = mtk_disp_pwm_remove,
> +};
> +
> +module_platform_driver(mtk_disp_pwm_driver);
Same here. Also, no need to initialize .driver.owner,
module_platform_driver() does that for you.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20150512/1391cf0a/attachment-0001.sig>
More information about the Linux-mediatek
mailing list