[PATCH 2/3] spi: mediatek: Add spi bus for Mediatek MT8173
Mark Brown
broonie at kernel.org
Fri May 8 10:53:06 PDT 2015
On Fri, May 08, 2015 at 04:55:42PM +0800, leilk.liu at mediatek.com wrote:
> From: Leilk Liu <leilk.liu at mediatek.com>
>
> This patch adds basic spi bus for MT8173.
Please try to only CC relevant people on patches, you've got a very
broad CC list here and I'm not sure I understand why everyone is on it.
Sending people irrelevant patches adds to the volume of mail people have
to handle which takes time away from other things.
> +config SPI_MT65XX
> + tristate "MediaTek SPI controller"
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + select SPI_BITBANG
Unless your controller is geniunely bitbanging you shouldn't be using
the bitbang framework, modern drivers should implement set_cs() and
transfer_one() instead. You should also be using the core helpers for
DMA mapping.
The driver looks basically good other than this, it shouldn't be too
much work (and ought to save you some code) to refactor to the modern
interfaces.
> +#define IDLE 0
> +#define INPROGRESS 1
> +#define PAUSED 2
> +
> +#define PACKET_SIZE 1024
You should namespace the constants you're using to avoid clashes with
headers.
> +static const struct of_device_id mtk_spi_of_match[] = {
> + { .compatible = "mediatek,mt6589-spi", .data = (void *)COMPAT_MT6589},
> + { .compatible = "mediatek,mt8173-spi", .data = (void *)COMPAT_MT8173},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mtk_spi_of_match);
There were three compatible strings listed in the DT binding but only
two here.
> + /*set the software reset bit in SPI_CMD_REG.*/
/* Spaces please */
> +static unsigned long mtk_get_device_prop(struct platform_device *pdev)
> +{
> + const struct of_device_id *match;
> +
> + match = of_match_node(mtk_spi_of_match, pdev->dev.of_node);
> + return (unsigned long)match->data;
> +}
This wrapper doesn't seem to be doing a lot and will crash if we somehow
manage to get the driver loaded without a match (eg, if someone tries to
instantiate as a regular platform device).
> + ret = clk_prepare_enable(mdata->clk);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
> + goto err;
> + }
I'd expect to see runtime PM callbacks to enable and disable this clock
in order to minimise power consumption.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20150508/301f2a2f/attachment.sig>
More information about the Linux-mediatek
mailing list