[PATCH 2/5] iommu/mediatek: Add mt8173 IOMMU driver

Robin Murphy robin.murphy at arm.com
Fri Mar 20 12:14:59 PDT 2015


On 18/03/15 11:22, Yong Wu wrote:
> Hi Tomasz,
>     Thanks very much for your review. please help check below.
> The others I will fix in the next version.
>
> Hi Robin,
>     There are some place I would like you can have a look and give me
> some suggestion.
>
> On Wed, 2015-03-11 at 19:53 +0900, Tomasz Figa wrote:
>> Hi,
>>
>> Please find next part of my comments inline.
>>
>> On Fri, Mar 6, 2015 at 7:48 PM,  <yong.wu at mediatek.com> wrote:
>>
>> [snip]
>>
>>> +/*
>>> + * pimudev is a global var for dma_alloc_coherent.
>>> + * It is not accepatable, we will delete it if "domain_alloc" is enabled
>>
>> It looks like we indeed need to use dma_alloc_coherent() and we don't
>> have a good way to pass the device pointer to domain_init callback.
>>
>> If you don't expect SoCs in the nearest future to have multiple M4U
>> blocks, then I guess this global variable could stay, after changing
>> the comment into an explanation why it's correct. Also it should be
>> moved to the top of the file, below #include directives, as this is
>> where usually global variables are located.
> @Robin,
>       We have merged this patch[0] in order to delete the global var, But
> it seems that your patch of "arm64:IOMMU" isn't based on it right row.
> it will build fail.

Yeah, I've not yet managed to try pulling in that series (much as I 
approve of it), partly as I know doing so is going to lean towards a 
not-insignificant rework and I'd rather avoid picking up more unmerged 
dependencies to block getting _something_ in for arm64 (which we can 
then improve).

>
> [0]:http://lists.linuxfoundation.org/pipermail/iommu/2015-January/011939.html
>
>>> + */
>>> +static struct device *pimudev;
>>> +
> [snip]
>>> +
>>> +static int mtk_iommu_attach_device(struct iommu_domain *domain,
>>> +                                  struct device *dev)
>>> +{
>>> +       unsigned long flags;
>>> +       struct mtk_iommu_domain *priv = domain->priv;
>>> +       struct mtk_iommu_info *piommu = priv->piommuinfo;
>>> +       struct of_phandle_args out_args = {0};
>>> +       struct device *imudev;
>>> +       unsigned int i = 0;
>>> +
>>> +       if (!piommu)
>>
>> Could you explain when this can happen?
> 	If we call arch_setup_dma_ops to create a iommu domain,
> it will enter iommu_dma_attach_device, then enter here. At that time, we
> don't add the private data to this "struct iommu_domain *".
> @Robin, Could this be improved?

Calling arch_setup_dma_ops() from the driver looks plain wrong, 
especially given that you apparently attach the IOMMU to itself - if you 
want your own domain you should use iommu_dma_create_domain(). I admit 
that still leaves you having to dance around a bit in order to tear down 
the automatic domains for now, but hopefully we'll get the core code 
sorted out sooner rather than later.

>>
>>> +               goto imudev;
>>
>> return 0;
>>
>>> +       else
>>
>> No else needed.
>>
>>> +               imudev = piommu->dev;
>>> +
>>> +       spin_lock_irqsave(&priv->portlock, flags);
>>
>> What is protected by this spinlock?
> 	We will write a register of the local arbiter while config port. If
> some modules are in the same local arbiter, it may be overwrite. so I
> add it here.
>>
>>> +
>>> +       while (!of_parse_phandle_with_args(dev->of_node, "iommus",
>>> +                                          "#iommu-cells", i, &out_args)) {
>>> +               if (1 == out_args.args_count) {
>>
>> Can we be sure that this is actually referring to our IOMMU?
>>
>> Maybe this should be rewritten to
>>
>> if (out_args.np != imudev->of_node)
>>          continue;
>> if (out_args.args_count != 1) {
>>          dev_err(imudev, "invalid #iommu-cells property for IOMMU %s\n",
>>
>> }
>>
>>> +                       unsigned int portid = out_args.args[0];
>>> +
>>> +                       dev_dbg(dev, "iommu add port:%d\n", portid);
>>
>> imudev should be used here instead of dev.
>>
>>> +
>>> +                       mtk_iommu_config_port(piommu, portid);
>>> +
>>> +                       if (i == 0)
>>> +                               dev->archdata.dma_ops =
>>> +                                       piommu->dev->archdata.dma_ops;
>>
>> Shouldn't this be set automatically by IOMMU or DMA mapping core?
> @Robin,
>       In the original "arm_iommu_attach_device" of arm/mm, it will call
> set_dma_ops to add iommu_ops for each iommu device.
> But iommu_dma_attach_device don't help this, so I have to add it here.
> Could this be improved?

If you implemented a simple of_xlate callback so that the core code 
handles the dma_ops as intended, I think the simplest cheat would be to 
check the client device's domain, either on attachment or when they 
start mapping/unmapping, and move them to your own domain if necessary. 
I'm putting together a v3 of the DMA mapping series, so I'll have a look 
to see if I can squeeze in a way to make that a bit less painful until 
we solve it properly.


Robin.

>>
>>> +               }
>>> +               i++;
>>> +       }
>>> +
>>> +       spin_unlock_irqrestore(&priv->portlock, flags);
>>> +
>>> +imudev:
>>> +       return 0;
>>> +}
>>> +
>>> +static void mtk_iommu_detach_device(struct iommu_domain *domain,
>>> +                                   struct device *dev)
>>> +{
>>
>> No hardware (de)configuration or clean-up necessary?
> I will add it. Actually we design like this:If a device have attached to
> iommu domain, it won't detach from it.
>>
>>> +}
>>> +
> [snip]
>>
>>> +
>>> +       piommu->protect_va = devm_kmalloc(piommu->dev, MTK_PROTECT_PA_ALIGN*2,
>>
>> style: Operators like * should have space on both sides.
>>
>>> +                                         GFP_KERNEL);
>>
>> Shouldn't dma_alloc_coherent() be used for this?
>       We don't care the data in it. I think they are the same. Could you
> help tell me why dma_alloc_coherent may be better.
>>
>>> +       if (!piommu->protect_va)
>>> +               goto protect_err;
>>
>> Please return -ENOMEM here directly, as there is nothing to clean up
>> in this case.
>>
> [snip]
>>
>>> +               dev_err(piommu->dev, "IRQ request %d failed\n",
>>> +                       piommu->irq);
>>> +               goto hw_err;
>>> +       }
>>> +
>>> +       iommu_set_fault_handler(domain, mtk_iommu_fault_handler, piommu);
>>
>> I don't see any other drivers doing this. Isn't this for upper layers,
>> so that they can set their own generic fault handlers?
>       I think that this function is related with the iommu domain, we
> have only one multimedia iommu domain. so I add it after the iommu
> domain are created.
>>
>>> +
>>> +       dev_set_drvdata(piommu->dev, piommu);
>>
>> This should be set before allowing the interrupt to fire. In other
>> words, the driver should be fully set up at the time of enabling the
>> IRQ.
>>
>>> +
>>> +       return 0;
>>
>> style: Missing blank line.
>>
>>> +hw_err:
>>> +       arch_teardown_dma_ops(piommu->dev);
>>> +pte_err:
>>> +       kmem_cache_destroy(piommu->m4u_pte_kmem);
>>> +protect_err:
>>> +       dev_err(piommu->dev, "probe error\n");
>>
>> Please replace this with specific messages for all errors (in case the
>> called function doesn't already print one like kmalloc and friends).
>>
>>> +       return 0;
>>
>> Returning 0, which means success, doesn't look like a good idea for
>> signalling a failure. Please return the correct error code as received
>> from function that errors out if possible.
>>
>> End of part 3.
>>
>> Best regards,
>> Tomasz
>
>
>





More information about the Linux-mediatek mailing list