[rtc-linux] [PATCH 2/2] rtc: mediatek: Add MT63xx RTC driver
Matthias Brugger
matthias.bgg at gmail.com
Fri Mar 13 04:19:36 PDT 2015
On 13/03/15 11:29, Eddie Huang wrote:
>
> I encounter some trouble when I add code to check return value of
> regmap_read and regmap_write. Every RTC register access through regmap,
> and there are many register read/write in this driver. If I check every
> return value, the driver will become ugly. I try to make this driver
> clean using following macro.
>
> static int __rtc_read(struct mt6397_rtc *rtc, u32 offset, u32 *data)
> {
> u32 addr = rtc->addr_base + offset;
>
> if (offset < rtc->addr_range)
> return regmap_read(rtc->regmap, addr, data);
>
> return -EINVAL;
> }
>
> #define rtc_read(ret, rtc, offset, data) \
> ({ \
> ret = __rtc_read(rtc, offset, data); \
> if (ret < 0) \
> goto rtc_exit; \
> }) \
>
I agree with Sascha on hiding a goto statement in a macro is not a good idea.
>
> And function call rtc_read, rtc_write looks like:
>
> static int mtk_rtc_read_time(struct device *dev, struct rtc_time *tm)
> {
> unsigned long time;
> struct mt6397_rtc *rtc = dev_get_drvdata(dev);
> int ret = 0;
> u32 sec;
>
> mutex_lock(&rtc->lock);
> do {
> rtc_read(ret, rtc, RTC_TC_SEC, &tm->tm_sec);
> rtc_read(ret, rtc, RTC_TC_MIN, &tm->tm_min);
> rtc_read(ret, rtc, RTC_TC_HOU, &tm->tm_hour);
> rtc_read(ret, rtc, RTC_TC_DOM, &tm->tm_mday);
> rtc_read(ret, rtc, RTC_TC_MTH, &tm->tm_mon);
> rtc_read(ret, rtc, RTC_TC_YEA, &tm->tm_year);
> rtc_read(ret, rtc, RTC_TC_SEC, &sec);
> } while (sec < tm->tm_sec);
What about introducing
static int __mtk_rtc_read_time(struct mt6397_rtc *rtc, struct rtc_time *tm, u32 *sec)
and hide the checks of return values from regmap_read and the offset check in there. You return the error code or 0.
This way the while loop would look like this:
do {
ret = __mtk_rtc_read_time(rtc, &tm, &sec);
if (ret < 0)
goto rtc_exit;
} while (sec < tm->tm_sec);
Best regards,
Matthias
More information about the Linux-mediatek
mailing list