[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

Kevin Hilman khilman at kernel.org
Wed Mar 11 10:14:23 PDT 2015


Sascha Hauer <s.hauer at pengutronix.de> writes:

> On Wed, Mar 11, 2015 at 11:16:31AM +0800, James Liao wrote:
>> Hi,
>> 
>> On Tue, 2015-03-10 at 10:41 +0100, Sascha Hauer wrote:
>> > On Mon, Mar 09, 2015 at 02:35:03PM -0700, Kevin Hilman wrote:
>> > > Sascha Hauer <s.hauer at pengutronix.de> writes:
>> > > 
>> > > > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
>> > > 
>> > > A bit of a changelog here would be useful describing this driver, that
>> > > it's only covering part of the device (e.g. power controller) with more
>> > > to come, dependency on the syscon driver, etc.
>> > > 
>> > > > +/*
>> > > > + * The Infracfg unit has bus protection bits. We enable the bus protection
>> > > > + * for disabled power domains so that the system does not hang when some unit
>> > > > + * accesses the bus while in power down.
>> > > > + */
>> > > 
>> > > Hmm, why don't you want to know if some device is accessing another
>> > > device which is in a domain that is powered down?   Seems like this is a
>> > > good way to hide real bugs.
>> > 
>> > How I understand it the system just hangs on erroneous accesses without
>> > these protection bits enabled, so enabling them at least makes sure we
>> > can output something.
>> > I must admit though that my understanding of these bits is quite limited
>> > and the only user of this driver I have available here (audio) doesn't
>> > make use of these protection bits, so I can't test here.
>> > 
>> > James, could you shed some light on this issue?
>> 
>> I asked our designer about the bus protection feature, here is his
>> response:
>> 
>> "
>> It's for unexpected signal glitch in Power switch process.
>> 
>> During Power switch process, we have clock switch, reset, isolation
>> enable/disable and  power switch involved where the transition of
>> asynchronous reset and  isolation is the most critical one,  which have
>> risk to introduce a unexpected short period signal transition from
>> MTCMOS’s interface to other alive HW . 
>> "
>> 
>> That means it protects unexpected bus accessing from HW, not from SW. So
>> it will not hide bugs from wrong SW access.
>
> Ok, thanks for clarifying. This means we should enable this feature
> sooner or later. Since the audio driver which is likely the first user
> of this driver doesn't need the protection bits I think we have some
> time and can add the protection bits once the clock patches have been
> merged.

Sounds OK to me.

But I still think it belongs in the infracfg layer, and not in the PM
domain layer.

Kevin



More information about the Linux-mediatek mailing list