[PATCH] clk: mediatek: Export CPU mux clocks for CPU frequency control

[Pi-Cheng Chen]

On Tue, Mar 10, 2015 at 3:55 PM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> On Tue, Mar 10, 2015 at 09:53:19AM +0800, Pi-Cheng Chen wrote:
>> On 5 March 2015 at 15:42, Sascha Hauer <s.hauer at pengutronix.de> wrote:
>> >
>> > My suggestion is to take another approach. Implement clk_set_rate for
>> > these muxes and in the set_rate hook:
>> >
>> > - switch mux to intermediate PLL parent
>> > - call clk_set_rate() for the real parent PLL
>> > - switch mux back to real parent PLL
>>
>> Hi Sascha,
>>
>> Thanks for your suggestion. I've tried to take this approach, but there's some
>> issues here.
>>
>> Calling clk_set_rate() inside the set_rate callback of cpumux will cause
>> an infinite recursive calling in the clock framework:
>> mux.set_rate() -> pll.set_rate() -> mux.set_rate -> ...
>
> I don't understand why setting the PLL rate should call into the mux
> set_rate. Are you sure you call clk_set_rate for the mux parent clk?
> I think the general approach should work, drivers/clk/sirf/clk-common.c
> does something similar in cpu_clk_set_rate(). If you like you can send
> me your work in progress state privatly, I'll have a look then.

Thanks for pointing me out the reference. I think I misunderstood the way you
suggested to do it. I'll post the new version once the design including cpufreq
part is finalized.

Best Regards,
Pi-Cheng
>
>>
>> I've also tries to update pll register settings in the set_rate()
>> callback of cpumux,
>> but the PLL clock information will not be correctly updated in this case.
>
> No, that won't work.
>
> Sascha
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |