[PATCH 1/2] dt-bindings: drm/bridge: Add IT6151 bridge chip driver bindings.

[CK Hu]

Add devicetree bindings for IT6151 MIPI to eDP bridge chip driver.

Signed-off-by: CK Hu <ck.hu at mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
---
 Documentation/devicetree/bindings/drm/bridge/it6151.txt | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/drm/bridge/it6151.txt

diff --git a/Documentation/devicetree/bindings/drm/bridge/it6151.txt b/Documentation/devicetree/bindings/drm/bridge/it6151.txt
new file mode 100644
index 0000000..ad0ad60
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/it6151.txt
@@ -0,0 +1,15 @@
+it6151 bridge bindings
+
+Required properties:
+	- compatible: "ite,it6151"
+	- reg: i2c address of the bridge's dp tx.
+	- rxreg: i2c address of the bridge's mipi rx.
+	- reset-gpio: OF device-tree gpio specification
+
+Example:
+	ite6151: edp-bridge at 5c {
+		compatible = "ite,it6151";
+		reg = <0x5c>;
+		rxreg = <0x6c>;
+		reset-gpio = <&pio 94 GPIO_ACTIVE_HIGH>;
+	};
-- 
1.8.1.1.dirty