[PATCH v2 3/4] cpufreq: mediatek: add Mediatek cpufreq driver

Pi-Cheng Chen pi-cheng.chen at linaro.org
Mon Mar 9 18:57:07 PDT 2015


On 10 March 2015 at 00:28, Russell King - ARM Linux
<linux at arm.linux.org.uk> wrote:
> On Wed, Mar 04, 2015 at 04:49:15PM +0800, pi-cheng.chen wrote:
>> +static int cpu_opp_table_get_freq_index(unsigned int freq)
>> +{
>> +     struct cpu_opp_table *opp_tbl = dvfs_info->opp_tbl;
>> +     int i;
>> +
>> +     for (i = 0; opp_tbl[i].freq != 0; i++) {
>> +             if (opp_tbl[i].freq >= freq)
>> +                     return i;
>> +     }
>> +
>> +     return -1;
>
> My "return -1" detector fired on this...
>
>> +static int cpu_opp_table_get_volt_index(unsigned int volt)
>> +{
>> +     struct cpu_opp_table *opp_tbl = dvfs_info->opp_tbl;
>> +     int i;
>> +
>> +     for (i = 0; opp_tbl[i].vproc != -1; i++)
>> +             if (opp_tbl[i].vproc >= volt)
>> +                     return i;
>> +
>> +     return -1;
>
> And this.
>
>> +static int mtk_cpufreq_notify(struct notifier_block *nb,
>> +                           unsigned long action, void *data)
>> +{
>> +     struct cpufreq_freqs *freqs = data;
>> +     struct cpu_opp_table *opp_tbl = dvfs_info->opp_tbl;
>> +     int old_vproc, new_vproc, old_index, new_index;
>> +
>> +     if (!cpumask_test_cpu(freqs->cpu, &dvfs_info->cpus))
>> +             return NOTIFY_DONE;
>> +
>> +     old_vproc = regulator_get_voltage(dvfs_info->proc_reg);
>> +     old_index = cpu_opp_table_get_volt_index(old_vproc);
>> +     new_index = cpu_opp_table_get_freq_index(freqs->new * 1000);
>> +     new_vproc = opp_tbl[new_index].vproc;
>
> Let's say that cpu_opp_table_get_freq_index() returns -1.  We then
> do no error checking on this, and access the memory immediately
> preceding opp_tbl[0].
>
> Since we'll be loading garbage from opp_tbl[-1], this probably means
> that mtk_cpufreq_voltage_trace() will go wrong.  Your method of using
> the vproc values to work out which direction we should walk between
> old_index...new_index means that we could end up walking through
> almost the whole UINT_MAX range to wrap around to the new index.
>
> Yet again, "return -1" proves to be a sure sign of a bug.

Hi Russell,

Thanks for your reviewing. I'll fix it in next version.

Best Regards,
Pi-Cheng

>
> --
> FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
> according to speedtest.net.



More information about the Linux-mediatek mailing list